deaxx

zephyr

Primary Git Repository for the Zephyr Project. Zephyr is a new generation, scalable, optimized, secure RTOS for multiple hardware architectures.

Solder-Reflow-Plate

PCB based SMD reflow plates

RF-tools-KiCAD

KiCAD RF tools: footprints wizard and round tracks, mask expander, via fencing

gecko_sdk

The Gecko SDK (GSDK) combines our Series 0 and Series 1 IoT product software development kits (SDKs) based on Gecko Platform into a single, integrated SDK.

zigbee-configurable-firmware

PTVO firmware for CC2530, CC2531, and CC2652 Zigbee chips

zigpy-znp

TI CC2531, CC13x2, CC26x2 radio support for Zigpy and ZHA

JN5169-for-xiaomi-wireless-switch

for xiaomi and lvmi wireless switch

SONOFF-SNZB-02-Temperature-and-humidity-sensor

An alternative firmware version for the SONOFF SNZB-02 temperature and humidity sensor. Adjustable sleep interval via zigbee network, thermostat and hydrostat functionality, standard temperature and humidity clusters, binding support.

EFEKTA-THP-THPLR-Outdoor-Indoor-sensor-Zigbee

It is a wireless temperature, pressure and humidity sensor, supports working in Zigbee networks. (Zigbee2mqtt open source project). Built on CC2530 chip (Zigbee), two modications: Ebyte E18-MS1PA2-PCB radio module with amplifier and Ebyte E18-MS1-PCB. Powered by the most common AAA batteries.

e-monitor

DIY Zigbee CC2530 Motion sensor (AM312/ AM412/ BS312/ BS412), Temperature /Humidity /Pressure sensor (BME280), Ambient Light sensor (BH1750), 3.7/2.9/2.13/1.54 inch e-Paper

TLSRPGM

TLSR SWire programmer

zigbee_firmware

4

aqara-opple

Alternative firmware for Aqara opple switches

EFEKTA_eON213z

My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets. The device use SHTC3 sensors, chip CC2530, battery CR2477.

EFEKTA-eTH102z

AirQualitySensor

Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8

jn5169-monitor

Read flash when CRP_LEVEL=1

t-monitor

DIY Zigbee Binding Monitor CC2530 Motion sensor (AM312/BS312), Temperature /Humidity /Pressure sensor (BME280), Ambient Light sensor (BH1750), CO₂ sensor (SCD40/41) ,EPD 3.7 /TFT 3.5 (ILI9486/ILI9488, XPT2046/FT6236)

SensBoard

cc2562 based universal sensor board

cc2652_zigbee_zed

Hardware/Software for a complete Zigbee-End-Device based on the CC2652

EFEKTA-eON37-Smart-Clock

zigbee_zr2a