Petit SWD is an ARM JTAG adapter which reduces the 2x10 100mil connector to a 1x4 100mil connector better suited for SWD debugging. It also has a type B USB input to provide power to the target board from either VBUS 5V or 3.3V from an onboard voltage regulator. This is selectable via pin header.
If you're going to use my free projects please consider sponsoring my work. Thanks!
- v1.0
- initial release
Copyright: René Richard
This documentation describes Open Hardware and is licensed under the CERN OHL v. 1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions