daniviga / home-assistant-tapo-p100

A custom integration to control Tapo devices from home assistant.

Home Assistant Tapo Integration

This is a custom integration to control Tapo devices from home assistant.

The core of the integration is provied by plugp100 python library based on work of @K4CZP3R.

Warning!!!

Although the integration works using LAN, the tapo device needs internet access to synchronize with tapo cloud, especially for credentials, a missing internet access could lead into "Invalida authentication error". Also a static IP must be set for device.

Warning!!!

For some unknown reason email with capital letter thrown an "Invalid authentication" error. So before open an new issue check your email address on Tapo App Settings. If contains capital letter, the integration won't work. I've opened an issue that explain this #122, I will fix asap. As workaround you can create a new account using all lower-case in your email address.

Features

• pure async home assistant's method
• support for tapo switch (P100, P110, P105, P115)
• support for tapo light bulb with or without color (L530, L510, L520)
• support for tapo light strip with or without color (L900)
• partial support for tapo light strip (L920). Only RGB works not the addressable feature of strip.
• support for P110 energy monitoring
• support for additional tapo sensors: overheat and wifi_signal
• allow configuration from home assistant UI with config flow
• allow configuration from configuration.yaml. supported domains are switch, light, sensor

How to install

Simplest and recomended way

This integration is part of HACS store, so you don't need anymore to add this repository as a custom repository. You can find it directly on HACS Store: search for tapo and you will find Tapo Controller. (HACS >= 1.6.0 is requried)

Old way as a custom repository (not recomended, but use if you want to use beta versions)

1. Install from HACS, add this repository as custom repository
2. Search into HACS store the tapo integration and install
3. Full restart of home assistant is recomended

This video show installation steps:

"Manual" way

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called tapo.
4. Download all the files from the custom_components/tapo/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant
7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "tapo"

How to add a Tapo device (after installing the integration)

Using UI

1. Be sure the integration is installed successfully
2. Go to integrations menu
3. Search for Tapo integration
4. Insert host (ip address), username and password for control your tapo device (the same used for tapo app). If you have a problem in this phase, like "invalid auth" error, please see #122, and if error persist write a comment in the same issue
5. Wait for connection. It automatically recognize if the tapo device is switch or light or something else :)

Configuration by configuration.yaml

Domain can be switch, light or sensor.

An example with switch:

switch:
  platform: tapo
  host: ...
  username: ...
  password: ...

Contributions are welcome!

Open a pull request, every contribution are welcome.

---