Damien Maguire's repositories
Tesla-Model-3-Battery-BMS
Reverse engineering of the Tesla Model 3 battery bms control
BMW-i3-CCS
Reverse engineering of the BMW i3 LIM (charge control) module for purposes of opensource CCS fast charging
Prius-Gen3-Inverter
Open source logic board to control the Toyota Prius Gen 3 Inverter
Tesla-Model-3-Drive-Unit
Open Source logic board for the Tesla Model 3 rear drive unit. PCB Files in DesignSpark 8 format.
Tesla-Model-3-Charger
Reverse Engineering of the Tesla Model 3 charger and development of an open source control board
VW-OnBoard-Charger
Hacking and reverse engineering of the VW Onboard AC chargers
MG-EV-Charger
Reverse engineering of the on board charger (OBC) used in MG Electric Vehicles
BMW-PHEV-BMS
Reverse engineering of the BMW PHEV battery pack bms CAN bus data
Tesla-M3-Bms-Software
Software for the STM32 based controller for the Tesla Model 3 battery BMB boards
Volvo-V50-CAN-Info
CANbus and other info on my Volvo V50 EV Project. aka the MuskVo
stm32-Logger
EVBMW CanLogger 6000
Yaris-Auris-Inverter
Open Source Logic board for the Toyota Yaris and Auris inverter
MG-EV-Inverter
Reverse engineering of the drive motor and inverter used in MG Electric Vehicles
Lexus-IS300H-Inverter
Open Source Logic board to run the Lexus IS300 Hybrid Inverter for EV Conversion projects
stm32-sine
Main firmware of the Huebner inverter project
stm32-template
Empty Openinverter project to start your own
VW-Mild-Hybrid
Reversen engineering of VW Mild hybrid (48v) Parts
ccs32clara
STM32 with QCA7005 as CCS charge controller
RemoteESP32-Board
Stand alone 12V ESP32 module with SD card and RS485 and CAN bus interfaces
SnifferParser
Takes the binary output of the ToyotaSniffer and converts to .csv
foccci
Fully Open CCS Charge Controller Interface with QCA7005 PLC modem
GolfGTE
VW Golf GTE CAN Stuff
Nissan-Leaf-Gen-3-Adapter-Board
Gen. 3 Nissan Leaf Inverter Open Inverter Mini Mainboard Adapter PC Board