cactbot (ffxiv raiding overlay)

About
Installing
Building From Source
UI Module Overview
Troubleshooting
Cactbot Customization
Supported Languages

About

cactbot is an ACT overlay that provides raiding tools for Final Fantasy XIV. This project is an overlay plugin for OverlayPlugin which itself is a plugin for Advanced Combat Tracker.

cactbot provides these modules:

raidboss: built-in timelines and triggers:

oopsyraidsy: mistake and death reporting

jobs: condensed gauges with buff and proc tracking

eureka: Eureka NM tracking map

fisher: Fishing cast time tracking

radar: hunt mob directions, puller notifications

dps: extra features for dps meters

Installing

Dependencies

Install .NET Framework version 4.6.1 or above.

You must have DirectX 11 enabled for Final Fantasy XIV.

Install the 64-bit version of Advanced Combat Tracker, if you have not already.

Install FFXIV ACT Plugin

If you have just installed ACT, then you will be presented with a startup wizard. To get to the startup wizard otherwise, click on Options and then click on Show Startup Wizard.

In the startup wizard, select FFXIV Parsing Plugin and then click the Download/Enable Plugin button. This will download %APPDATA%\Advanced Combat Tracker\Plugins\FFXIV_ACT_Plugin.dll and enable it in the list of plugins.

Alternative FFXIV Plugin Guides:

Install OverlayPlugin

At this point, if you select the Plugins tab and go to the Plugin Listing, your list of plugins should look something like this:

Click on Get Plugins to open up the ACT plugin installer.

Select Overlay Plugin and then click Download and Enable.

This will download OverlayPlugin into %APPDATA%\Advanced Combat Tracker\Plugins\OverlayPlugin and enable OverlayPlugin.dll in the list of plugins.

As a note, you must use the most current fork of OverlayPlugin and not the original RainbowMage version or the hibiyasleep fork or the ngld fork.

Installing cactbot

Again, go to the Plugins tab and go to the Plugin Listing, and then select Get Plugins.

Select Cactbot and then click Download and Enable.

This will download the cactbot into %APPDATA%\Advanced Combat Tracker\Plugins\cactbot-version\cactbot and enable CactbotOverlay.dll in the list of plugins.

Note: Due to a difference in how ACT expects archives to be and how cactbot generates its zip files, there will be something like a cactbot-0.15.2 folder that corresponds to the initial version that you downloaded cactbot. This folder name does not matter and is cosmetic.

Plugin Load Order

Because of cactbot’s dependencies, cactbot must be loaded after both OverlayPlugin and the FFXIV ACT plugin. Verify that your plugins are in this order:

FFIXV_ACT_Plugin.dll
OverlayPlugin.dll
CactbotOverlay.dll

Finally, restart ACT.

Adding overlay modules

Here's an example of how to set up the raidboss overlay module. Setting up other cactbot overlays works identically.

Open ACT.
Make sure you've restarted ACT after adding the cactbot plugin.
Navigate to the Plugins tab of ACT and then the OverlayPlugin.dll tab inside it.
Click the "New" button and then pick Cactbot Raidboss in the Preset list.
At this point, you should see some test UI appear on screen. cactbot provides default test UI, a large dashed red border, and a blue background to help with resizing and placing overlays on screen. These all go away when the overlay is locked in the config panel for the overlay. You should always lock your overlay once you are done resizing and placing it.
Type in any name you'd like as the name of this overlay, e.g. raidbossy.
Click the OK button to add this as an Overlay. It will now appear in the list of overlays in the Plugins -> OverlayPlugin.dll tab.
Drag and resize the overlay to the location that you want it in.
In the General tab of the Raidboss overlay, click the Lock Overlay and Enable Clickthrough checkboxes. The test bars, debug text, dashed red border, and shaded blue background will disappear once the overlay has been locked.
If you want to test the raidboss plugin, teleport to Summerford Farms, and do a /countdown 5.
Adding other cactbot overlays is a similar process. Follow the same process but select a different cactbot preset.

Building from source

Follow all the steps above for installing cactbot first. To install dependencies there are 2 methods: per script and manually

Dependencies: Script Method

curl MUST be installed (this is used to download dependencies)
Execute the ./util/fetch_deps.py script
Continue with Steps to build

Dependencies: Manual Method

Please download the latest Zip file from https://github.com/EQAditu/AdvancedCombatTracker/releases/
Extract the Advanced Combat Tracker.exe to cactbot/plugin/ThirdParty/ACT/
Please download the latest SDK Zip file from https://github.com/ravahn/FFXIV_ACT_Plugin/ (make sure the file says SDK in its name)
Extract the SDK folder as well as the FFXIV_ACT_Plugin.dll to cactbot/plugin/ThirdParty/FFXIV_ACT/
Please download the latest Zip file from https://github.com/OverlayPlugin/OverlayPlugin/releases/
Extract the libs folder as well as the OverlayPlugin.dll to cactbot/plugin/ThirdParty/OverlayPlugin/
Continue with Steps to build

The folder should look something like this (keep in mind files can change with updates in the future):

ThirdParty
|- ACT
|  |- Advanced Combat Tracker.exe
|- FFXIV_ACT
|  |- SDK
|  |  |- FFXIV_ACT_Plugin.Common.dll
|  |  |- FFXIV_ACT_Plugin.Config.dll
|  |  |- FFXIV_ACT_Plugin.LogFile.dll
|  |  |- FFXIV_ACT_Plugin.Memory.dll
|  |  |- FFXIV_ACT_Plugin.Network.dll
|  |  |- FFXIV_ACT_Plugin.Overlay.dll
|  |  |- FFXIV_ACT_Plugin.Parse.dll
|  |  |- FFXIV_ACT_Plugin.Resource.dll
|  |- FFXIV_ACT_Plugin.dll
|- OverlayPlugin
   |- libs
   |  |- HtmlRenderer.dll
   |  |- Markdig.Signed.dll
   |  |- Newtonsoft.Json.dll
   |  |- OverlayPlugin.Common.dll
   |  |- OverlayPlugin.Core.dll
   |  |- OverlayPlugin.Updater.dll
   |  |- SharpCompress.dll
   |  |- System.ValueTuple.dll
   |  |- websocket-sharp.dll
   |- OverlayPlugin.dll

Steps to build plugin

Open the solution in Visual Studio (tested with Visual Studio 2017).
Build for "Release" and "x64".
The plugin will be built as bin/x64/Release/CactbotOverlay.dll.
Add the built plugin directly as an ACT plugin. In the ACT -> Plugins -> Plugin Listing tab, click the Browse button and find the bin/x64/Release/CactbotOverlay.dll where this file was built. Then click Add/Enable Plugin.

npm and webpack

If you are not a cactbot developer and are trying to modify cactbot for your own personal triggers, you should instead refer to the customization documentation instead of changing your local cactbot files.

To install npm and start Webpack, follow these steps:

Install nodejs and npm
Run npm install in the root of the cactbot directory.
Run npm run build or npm start.

See the contributing documentation for more details about using Webpack.

UI module overview

The ui/ directory contains cactbot's ui modules. If you installed cactbot following the instructions above, this will most likely be %APPDATA%\Advanced Combat Tracker\Plugins\cactbot-version\cactbot\ui\.

Each cactbot ui module should be added as a separate overlay. See the Adding Overlay Modules section for more details about setup.

raidboss module

To use this module, point cactbot at ui/raidboss/raidboss.html or use the Cactbot Raidboss preset.

This module provides a visual timeline of upcoming events in a fight, as well as text and audio notifications to help increase raid awareness. Text and sound alerts can be based on the fight timeline, or come from log messages that occur in the game, similar to ACT's "Custom Triggers". The module is designed to look and feel similar to the BigWigs Bossmods addon for World of Warcraft.

This page lists the currently supported set of content in cactbot. Support is continually added over time (patches welcome!) but a lot of old content may not be supported yet.

Fight timelines are provided in files designed for the ACT Timeline plugin, documented here with some extensions.

There are three levels of text alerts, in order of escalating importance: info, alert, and alarm. Text messages will be in one of these, and more important levels are larger and more eye grabbing colors. Text-to-speech can be configured if you prefer that over on screen text.

Timeline files and triggers for text and sound alerts are found in ui/raidboss/data, timeline files with .txt extension and trigger files with .ts extension.

In this screenshot, the raidboss module is highlighted, with the timeline circled in red, and the text alerts circled in yellow, with an alert-level text message visible.

raidboss emulator

If you are writing triggers or timelines and want to test them, you can use the raidboss emulator: ui/raidboss/raidemulator.html.

This currently can only be loaded in a browser and not as an overlay. This will work in current version of Chrome, and should work in other browsers as well but this is less tested.

If you want the emulator to use your ACT settings and user triggers, you will need to enable the OverlayPlugin WS Server via the following instructions:

Start ACT.
Start the WS Server via Plugins -> OverlayPlugin WSServer -> Stream/Local Overlay.

If you're developing triggers for the cactbot repository, you can start a local development server via npm run start and load the overlay in Chrome via http://127.0.0.1:8080/ui/raidboss/raidemulator.html?OVERLAY_WS=ws://127.0.0.1:10501/ws

If you're developing user triggers, you can load the overlay in Chrome via https://quisquous.github.io/cactbot/ui/raidboss/raidemulator.html?OVERLAY_WS=ws://127.0.0.1:10501/ws

If you're trying to reproduce an issue, you can load the overlay in Chrome via https://quisquous.github.io/cactbot/ui/raidboss/raidemulator.html. You don't need the WS Server running in this case.

Once you've got the overlay loaded, you can follow these instructions to use the emulator.

Drag and drop a network log onto the page.
Select the zone and encounter, and then click Load Encounter.

If the emulator is not working, check the console log in the inspector for errors.

oopsyraidsy module

To use this module, point cactbot at ui/oopsyraidsy/oopsyraidsy.html or use the Cactbot OopsyRaidsy preset.

This module provides mistake tracking and death reporting. Oopsy raidsy is meant to reduce the time wasted understanding what went wrong on fights and how people died. During the fight, only a limited number of mistakes are shown (to avoid clutter), but afterwards a full scrollable list is displayed.

When somebody dies, the last thing they took damage from is listed in the log. For example, if the log specifies: ":skull: Poutine: Iron Chariot (82173/23703)" this means that Poutine most likely died to Iron Chariot, taking 82173 damage and having 23703 health at the time. The health value itself is not perfect and may be slightly out of date by a ~second due to a hot tick or multiple simultaneous damage sources.

When mistakes are made that are avoidable, oopsy logs warning (:warning:) and failure (:no_entry_sign:) messages, explaining what went wrong.

Mistake triggers are specified for individual fights in the ui/oopsyraidsy/data folder.

You can copy oopsy lines to the clipboard by clicking them. (You may need to uncheck Enable Clickthrough checkbox from the OverlayPlugin option.)

jobs module

To use this module, point cactbot at ui/jobs/jobs.html or use the Cactbot Jobs preset.

This module provides health and mana bars, as well as icons and timer bars for big raid buffs such as The Balance and Trick Attack. It also features a food buff warning to keep up your food buff when leveling or raiding, and a visual pull countdown.

It has more fleshed out support for some jobs but is strongly a Work In Progress for others.

Supported Jobs (Click to expand)

Job	Feature
Paladin	Shows Oath amount, and atonement stacks, DoT remaining time, Fight or Flight duration/cooldown, Expiacion cooldown and shows combo time remaining.
Warrior	Shows Beast amount, Surging Tempest duration, Upheaval and Inner Release cooldown, and shows combo time remaining.
Dark Knight	Shows the blood amount and darkside time, BloodWeapon and Delirium and LivingShadow duration/cooldown, and shows combo time remaining.
Gunbreaker	Shows No Mercy duration/cooldown, Bloodfest and Gnashing Fang cooldown, Cartridge amount, and shows combo time remaining.
White Mage	Shows Heal and Blood Lily amount, time to next Lily, DoTs remaining time, and shows Assize and Lucid Dreaming cooldown.
Scholar	Shows Aetherflow stacks, Fairy gauge amount/time remaining, DoTs remaining time, and shows Aetherflow and Lucid Dreaming cooldown.
Astrologian	Shows Astrosigns amount, notify who or whether to play the current card, DoTs remaining time, and shows Draw and Lucid Dreaming cooldown.
Sage	Shows Addersgall and Addersting stacks, time to next Addersgall, DoTs remaining time, and shows Phlegma and Rhizomata and Lucid Dreaming cooldown.
Monk	Shows chakra count and form time, and tracks monk buffs and debuffs.
Dragoon	Shows blood and eye amount, remaining Disembowel time, jump cooldown, and Lance Charge and Dragon Sight duration/cooldown.
Ninja	Shows Ninki amount, Huton remaining time, Trick Attack duration/cooldown, Bunshin and Mudras cooldown, and shows combo time remaining.
Samurai	Shows Kenki amount, Meditation stacks, Fugetsu and Fuka and Higanbana duration, Tsubame-gaeshi cooldown, and shows combo time remaining.
Reaper	Shows Soul Gauge, Shroud Gauge, Death's Design duration, Soul Slice and Gluttony cooldown, Arcane Circle duration/cooldown, and shows combo time remaining.
Bard	Shows songs playing and remaining time, Repertoire stack, Soul Voice amount, StraightShotReady track, DoT remaining time, and a bar that show when your DoTs will tick.
Machinist	Shows Heat gauge, Battery gauge, combo timer, Drill/Bioblaster and Air Anchor and Chain Saw cooldown, Wild Fire cooldown/duration. When Wild Fire is active, there will be a gauge to show how many GCD you have landed.
Dancer	Shows combo timer, Feather gauge, Esprit gauge, Standard Step cooldown, Technical Step and Flourish cooldown/duration.
Black Mage	Shows DoTs remaining time, Firestarter and Thundercloud proc duration, time to next xeno, MP ticker, Fire/Ice stack and umbral heart stack.
Summoner	Shows Demi-Summoning time, Aetherflow stack, Attunement stacks, Energy Drain cooldown, Trance cooldown, and Lucid Dreaming cooldown.
Red Mage	Shows white/black mana, tracks procs for Verstone and Verfire, and Fleche and Contre Sixte cooldown.
Blue Mage	Shows cooldown of offguard, lucid dreaming, and Song Of Torment DoT remaining time.

In this screenshot, the jobs module is highlighted for the Red Mage job. The health and mana bars, as well as Red Mage white/black mana tracking is circled in purple, with the large raid buff tracking pointed to beside it in orange. ~~The first step of the melee combo has been executed, which is displayed as the yellow box above the health bar.~~ The proc tracking is circled below in green.

eureka module

To use this module, point cactbot at ui/eureka/eureka.html or use the Cactbot Eureka preset.

This module provides automatic tracking of NMs that are popped or have been killed. It shows gales/night timers and any local tracker link that has been pasted in chat. Any flags in chat are also temporarily included on the map.

It currently does not read the tracker information directly. However, if you click on the left/red "Copy killed NMs" button in the tracker to copy the list of currently dead NMs, you can paste it in game, e.g. /echo NMs on cooldown: Serket (7m) → Julika (24m) → Poly (54m)

If you do not see the emoji, make sure you have installed this Windows update.

radar module

To use this module, point cactbot at ui/radar/radar.html or use the Cactbot Radar preset.

This module lets you know about nearby hunt mobs (S-rank, A-rank, etc). When one pops, it gives you an arrow (based on your character's heading) and a distance to the mob.

There are options to show who pulled the mob, as well as to configure the display of the radar. You can also set up custom options for different ranks (e.g. make noises for S rank, but be silent for B ranks), or set up custom triggers for any mob name you would like.

See the cactbot/user/radar-example.js for more options.

fisher module

To use this module, point cactbot at ui/fisher/fisher.html or use the Cactbot Fisher preset.

When you cast your line at a fishing hole, this module keeps track of when you reel in particular fish so that you know what you might be getting when you hook it.

Cast times are currently only logged as you fish, so there won't be any data until you've caught each fish. Green bars represent light tugs, yellow is a medium tug and red bars are legendary/heavy tugs.

Check here for common troubleshooting tips.

dps meters

cactbot can be used with any dps meter overlay designed for OverlayPlugin's miniparse addon, with the option to build out more features through cactbot's additional Javascript APIs. cactbot also auto-stops fights on wipes, so you can configure ACT's fight time to infinity.

The xephero dps meter is based on the same dps meter built for miniparse, with the additional ability to do per-phase dps tracking, displayed in additional columns. In the screenshot below the phases are named B1, B2, B3. These autogenerate from dungeon bosses, but could be used to differentiate raid fight phases.

The rdmty dps meter is based on the same dps meter for miniparse, and recolored to match fflogs.

pull counter module

This small module sticks the current pull count for raiding bosses on screen. This is primarily for folks who stream a lot and want to review video footage. Having a number on screen makes it easy to scrub through video and find particular pulls to review.

In most cases, you can reset the count for the current boss/zone by typing /echo pullcounter reset. You can also edit the counts directly in your %APPDATA%\Advanced Combat Tracker\Config\RainbowMage.OverlayPlugin.config.json file.

test module

To use this module, point cactbot at ui/test/test.html or use the Cactbot Test preset.

This module is just an onscreen test of cactbot variables and is not meant to be used while playing. It can be useful to try out to make sure everything is working as expected or to use to help debug overlay issues.

Troubleshooting

A general FAQ can be found here containing solutions to common Cactbot issues.

Cactbot Customization

Most common cactbot configuration can be done via the control panel, inside of ACT.

This can be found by going to Plugins -> OverlayPlugin.dll -> Cactbot Event Source, and then clicking on options there.

In particular, if you want to use text to speech for raidboss alerts, you can change the "Default alert output" to be "TTS Only" or "Text and TTS". You can also change this on a per trigger basis.

Or, if for some reason (???) you don't want the ready check sound alert, you can disable this via the same options panel. Go to Raidboss -> General Triggers -> General -> General Ready Check, and set it to Disabled instead of Defaults.

These options are stored in your %APPDATA%\Advanced Combat Tracker\Config\RainbowMage.OverlayPlugin.config.json file. It is not recommended to edit this file directly, as it must be strict json and ACT might fail to load if the file is written incorrectly.

It is recommended that you do most of your configuration via this control panel rather than with user files. Files in cactbot/user/ are more powerful and can override anything from the control panel. However, this can also be confusing when the control panel doesn't adjust something properly that a cactbot/user/ file is overriding silently.

See this documentation for more details about user javascript and css files.

Supported Languages

cactbot is tested and works with the current international (English, German, French, Japanese) version, the current Chinese version, and the current Korean version. Some translations are still a work in progress.

Licensing, Trademarks, Copyright

cactbot is open source under the Apache License, Version 2.0.

FINAL FANTASY is a registered trademark of Square Enix Holdings Co., Ltd.

Final Fantasy art and icons reused non-commercially under the FINAL FANTASY® XIV Materials Usage License.

See the LICENSE file for more details about other bundled projects.