The TITAN is a tiny RepRap based 3D printer. With a 190x190x190 footprint it can print objects up to 80x80x70mm. It is designed for easy transport so sturdy, light and small.
The TITAN is under heavy development. The first prototype is still being assembled, and it has not printed yet.
The design files are uploaded, but unfinished at the moment. The following parts are missing:
- Extruder
I did not make a full Bill Of Materials yet. But my currently used parts are:
- M6 rods. 4x 190mm, 2x 150mm (1 large and 1 small can be cut from 13" rod)
- M8 rods. 2x 100mm
- 2x LM8UU bearings
- 1x Ultimaker hotend
- 1x Ultimaker bowden tube
- T5 timing belt. Multiple lengths cut from 2x 10T5/800 (You need a total of 6 belts of 5mm width, so you need to cut the 10T5 belts in half trough the center)
- 4x NEMA14 motor. 1400 g-cm (20 oz-in)
- 8x 626-ZZ bearings
Not yet defined:
- Screws (lots of M3 screws)
- Extruder parts