On our website you can get information about the open/closed state of the Hackspace. You also can look up whether there is a person who can help you with your project.
In the Hackspace will be a RFID reader attached to a Rasperry Pi running a Python scrip that accesses a database and updates the status. The content on the webpage is generated with the database.
##Requirements
$ sudo apt-get install python-dev to install
SPI Python Library: $ git clone https://github.com/lthiery/SPI-Py.git $ cd SPI-Py $ sudo pyhton setup.py install
MFRC522 Python Library: $ cd .. $ cd MFRC522-python $ git clone https://github.com/mxgxw/MFRC522-python
You can use this image for reference.
Name | Pin # | Pin name |
---|---|---|
SDA | 24 | GPIO8 |
SCK | 23 | GPIO11 |
MOSI | 19 | GPIO10 |
MISO | 21 | GPIO9 |
IRQ | None | None |
GND | Any | Any Ground |
RST | 22 | GPIO25 |
3.3V | 1 | 3V3 |
Login LED | 15 | GPIO3 |
Logout LED | 16 | GPIO4 |
Buzzer | 18 | GPIO5 |
##Website: