objectindex

Index your objects

The purpose of this project is to allow using cheap Single Board Computers with one or two cheap HDDs each to store important data. No RAID, it only works well with expensive disks and still has a single point of failure in the controller, and is difficult to recover. No NAS/NFS; doing a cluster is too difficult. HTTP-based object store is the way to go.

The goal is not to try to replicate POSIX/NFS but to store WORM large files with basic metadata in a way that is better than a POSIX filesystem.

Inspired by projects like:

Consume S3 API(s) (from MinIO or the like) and expose a rich metadata store.

Setup and usage

pip3 install https://github.com/ctengel/objectindex/archive/refs/heads/main.zip

There are then a few different ways to use this:

RESTful API: FLASK_APP=obj_idx.api OBJIDX_SETTINGS=/path/to/api.cfg flask run --host=0.0.0.0
- need minio running first and setup
  - see obj-idx-admin setup
- need postgres running and setup
  - see OBJIDX_SETTINGS=/path/to/api.cfg python3 -m obj_idx.db_create
- need API config file (see below)
GUI: FLASK_APP=obj_idx.gui OBJIDX_GUI_SETTINGS=/path/to/gui.cfg flask run --port 5001 --host=0.0.0.0
- need GUI config file (see below)
CLI client: obj-idx-client

Interim infrastructure

Hardware and such:

Raspberry Pi 3B, 3B+, 400
- starting specifically with 3B+
- tuning may be needed for Pis older than 4/400
External USB hard drive with SMR
- note that HDDs like this don't play well with having additional USB devices plugged in like an SSD; if you want to do this you will need to have an extra power source like a USB hub
ext4 format
- strongly considering xfs
standalone/non erasure
- note that single node single drive MinIO has been deprecated in late 2022 - single drive erasure coding has been introduced so using that now
32GB mini SDHC
- keep the swap here; putting on USB just overloads USB power/traffic

Steps to get MinIO running

On another machine

Download 2022-04-04-raspios-bullseye-arm64-lite.img.xz or similar from https://www.raspberrypi.com/software/operating-systems/
xzcat 2022-04-04-raspios-bullseye-arm64-lite.img.xz | sudo dd of=/dev/sda bs=4096

On the pi

Boot
sudo raspi-config
- ssh
- hostname
- disable autologin
- locale
- handle wifi killswitch?
- etc

/etc/dhcpcd.conf

 interface eth0
 static ip_address=192.168.1.254/24
 static routers=192.168.1.1
 static domain_name_servers=192.168.1.1

sudo apt update; sudo apt upgrade

sudo parted -a optimal /dev/sdX

 $ sudo parted -a optimal /dev/sdX
 GNU Parted 3.4
 Using /dev/sdX
 Welcome to GNU Parted! Type 'help' to view a list of commands.
 (parted) help    
 ...                                                         
 (parted) mklabel                                                          
 New disk label type? gpt
 Warning: The existing disk label on /dev/sdb will be destroyed and all data on this disk will be lost. Do you want to continue?
 Yes/No? y                                                                 
 (parted) mkpart                                                           
 Partition name?  []? ...
 File system type?  [ext2]? ext4                                           
 Start? 0%                                                                  
 End? 100%                                                                 
 (parted) print                                                            
 Model: ...
 Disk /dev/sdb: 2000GB
 Sector size (logical/physical): 512B/512B
 Partition Table: gpt
 Disk Flags: 

 Number  Start   End     Size    File system  Name          Flags
  1      1049kB  2000GB  2000GB  ext4         ...

 (parted) quit   




 Model: Seagate BUP Portable (scsi)
 Disk /dev/sda: 5001GB
 Sector size (logical/physical): 512B/4096B
 Partition Table: gpt
 Disk Flags: 

 Number  Start   End     Size    File system  Name      Flags
  1      1049kB  5001GB  5001GB  ext4         obj1data

sudo mkfs.ext4 /dev/sda1
sudo mkdir /mnt/obj1data
sudo blkid -s PARTUUID /dev/sda1
/etc/fstab: PARTUUID= /mnt/obj1data ext4 defaults,noatime 0 2
- set noauto to prevent attempt to mount at boot, if swapping removable drives
sudo useradd -mU minio

alternatively groupadd -g 1234 minio; useradd -m -u 1234 -g 1234 minio may be used to set a certain UID/GID
userdel -r minio can be used to uninstall`

sudo chown minio:minio /mnt/obj1data
sudo apt install screen

We need to periodically monitor and tune hardware:

/usr/bin/vcgencmd measure_temp
see https://www.blackmoreops.com/2014/09/22/linux-kernel-panic-issue-fix-hung_task_timeout_secs-blocked-120-seconds-problem/
- echo 1440 | sudo tee /sys/block/sda/device/timeout
- echo 720 | sudo tee /sys/block/sda/device/eh_timeout
- see /etc/sysctl.d
check SMART for the disk sudo smartctl -a /dev/sda
other articles -
sudo shutdown -r now; exit

As minio user

wget https://dl.min.io/server/minio/release/linux-arm64/minio
- alternatively GO111MODULE=on go install github.com/minio/minio@latest which will compile and install to ~/go/bin/minio
- see the official minio docs for more
wget https://dl.min.io/server/mc/release/linux-arm64/mc
chmod a+x minio mc
MINIO_ROOT_USER=minio MINIO_ROOT_PASSWORD=password /home/minio/minio server /mnt/obj1data --address 0.0.0.0:9000 --console-address 0.0.0.0:9001
- can be done as a script like ./start.sh and run in a screen session
actually setup buckets, users, replication, etc
- ./mc alias set xyz http://0.0.0.0:9000 minio password
  - for more info see the mc docs
- ./mc admin info minio
- ./mc admin user add minio user password
- ./mc mb minio/bucket
- grant access from user to bucket
  - vim userbucketpolicy.json - put bucket name(s) in there
  - ./mc admin policy add minio BUCKET-policy userbucketpolicy.json
  - ./mc admin policy set minio BUCKET-policy user=USER
  - ./mc admin user info minio christest
- ./mc update && ./mc admin update xyz/

systemd for minio

$ systemctl list-units | grep '/path/to/objectstore' | awk '{ print $1 }'

/etc/systemd/system/minio.service:

[Unit]
Description=MinIO Object Storage Service
After=network-online.target objectstoremountpoint.mount

[Service]
ExecStart=/home/minio/start.sh
WorkingDirectory=/home/minio
User=minio
Group=minio

[Install]
WantedBy=multi-user.target

$ sudo systemctl start minio
$ sudo systemctl status minio
$ sudo systemctl enable minio

Postgres

Some info on getting PostgreSQL running on Fedora:

https://developer.fedoraproject.org/tech/database/postgresql/about.html
- https://docs.fedoraproject.org/en-US/quick-docs/postgresql/
- /usr/share/doc/postgresql/README.rpm-dist

Initial steps to be performed as a sudoer:

sudo dnf install postgresql-server
sudo postgresql-setup --initdb
sudo systemctl start postgresql
sudo su -c "createuser -P USER" postgres  # note you will be prompted to create a password
sudo su -c "createdb -O USER DB" postgres

Note also that modifying /var/lib/pgsql/data/pg_hba.conf to include scram-sha-256 instead of ident etc may be needed.

Following steps to be run as user who will run the API.

OBJIDX_SETTINGS=../samp.cfg python3 -m obj_idx.db_create
pg_dump --schema-only DB > schema.sql

The db_create.py script will empty a database and create tables in the schema, and uses the same config file as the web app.

Config files

API

DEBUG = True
SQLALCHEMY_DATABASE_URI = 'postgresql:///objidx'
SQLALCHEMY_TRACK_MODIFICATIONS = False
OBJIDX_S3 = 'http://user:pass@localhost:9000/'
OBJIDX_BUCKETS = ['bucket1']

OBJIDX_S3 is a special URL for S3
OBJIDX_BUCKETS is a list of buckets that may be used.
The rest are standard Flask and sqlalchemy options

GUI

DEBUG = True
OBJIDX_URL="http://127.0.0.1:5000/"  # change if running on a different host
OBJIDX_AUTH="user"  # currently just username as no auth yet at API level, ideally pass thru in fut

Issues

Failed upload

Failed upload must be first cleared by PUT/PATCHing the object /object/<object-uuid>/ with {"deleted": true} to signify that upload has stopped.

ctengel / objectindex