Cru Waller's repositories
rc_receiver_to_usb_hid
STM32F1xx based USB HID for SBUS/CRSF/GHST/ELRS receivers.
elrs_handset
Custom DIY dual band (900/2400MHz) transmitter (handset) based on ExpressLRS.
ExpressLRS
ESP32/ESP8285 based LoRa Radio Link
fmi-hass-custom
Home Assistant Custom Component Supporting FMI Based Weather and Sensor Platforms
saleae_logic_decoders
Decoders for Saleae Logic software
Chorus32-ESP32LapTimer
This is my playground for new changes. Might be broken ;)
rc_receiver_to_pwm
Converts RC receiver serial output to PWM signals.
FENIX-rx5808-pro-diversity
ESP32 diversity video receiver - https://discord.gg/gG2sjjK
R9MM_bootloader
Bootloader for the ExpressLRS firmware.
viessmann_optolink2mqtt
Reads Viessmann device using vcontrold + optolink and reports data to mqtt broker
AM32-MultiRotor-ESC-firmware
Firmware for stm32f051 based speed controllers for use with mutirotors
betaflight
Open Source Flight Controller Firmware
betaflight-firmware-presets
Configuration Snippets for the Betaflight Flight Controller Firmware
dshot-esc-tester
Thrust stand data logger utilising the dshot600 protocol and ESC telemetry.
esphome
ESPHome is a system to control your ESP8266/ESP32 by simple yet powerful configuration files and control them remotely through Home Automation systems.
ExpressLRS.Backpack
Firmware for ExpressLRS compatible backpacks
GRBLHAL_RP2040
grblHAL driver for RP2040 (Pi Pico)
GRBLHAL_STM32H7xx
grblHAL driver for ST STM32H7xx (BTT SKR3, Nucleo-144, WeAct MiniSTM32H7xx)
hdzero-flasher
Simple ESP32 based hdzero flasher.
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
QUICKSILVER
Flight Controller Firmware
RotorHazard
Multi-node video transmitter race timer for drone racing
vallox_digit_to_mqtt
Vallox Digit modbus to MQTT.