cronos45 / kiauh

Klipper Installation And Update Helper

KIAUH - Klipper Installation And Update Helper

---

📋 Please see the Changelog for possible important information !

---

📢 Disclaimer: Usage of this script happens at your own risk!

This script acts as a helping hand for you to get set up in a fast and comfortable way.
This does not mean, it will relieve you of using your brain.exe! 🧠
Feel free to give it a try. If you have suggestions or encounter any problems, please report them.

---

🛠️ Instructions:

For downloading this script it is best to have git already installed.
If you haven't, please run sudo apt-get install git -y to install git first.
You will need it anyways!

After git is installed, use the following commands in the given order to download and execute the script:

cd ~
git clone https://github.com/th33xitus/kiauh.git
cd kiauh
chmod +x kiauh.sh scripts/*
./kiauh.sh

Additional Instructions:

If you need some more detailed instructions on how to install Klipper and Mainsail with KIAUH, check out this website:
Installing Klipper and Mainsail
Credits for these instructions go to @tumbleweedlabs.
Feel free to check out his work.

---

🧰 Functions and Features:

Core Functions:

• Installing of the Klipper Firmware to your Raspberry Pi or other Linux Distribution which makes use of init.d.
• Installing of several different web interfaces such as Duet Web Control, Mainsail, Fluidd or OctoPrint including their dependencies.
• Installing of the Moonraker API
• Updating of all the listed installations above excluding OctoPrint. For updating OctoPrint, please use the OctoPrint interface!
• Removing of all the listed installations above.
• Backup of all the listed installations above.

Also possible:

• Build the Klipper Firmware
• Flash the MCU
• Read ID of the currently connected printer (only one at the time)
• Write necessary entries to your printer.cfg, some of them customizable right in the CLI.
• and more ...

For a list of additional features please see: Feature List

---

📝 Notes:

• Tested only on Raspberry Pi OS Lite (Debian Buster)
• During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.

---

🛈 Sources & Further Information

For more information or instructions, please check out the appropriate repositories listed below:

---

⛵Klipper by KevinOConnor :

https://github.com/KevinOConnor/klipper

---

⛵Klipper S-Curve fork by dmbutyugin :

https://github.com/dmbutyugin/klipper/tree/scurve-smoothing
https://github.com/dmbutyugin/klipper/tree/scurve-shaping

---

🌙Moonraker by Arksine :

https://github.com/Arksine/moonraker

---

💨Mainsail Webinterface by meteyou :

https://github.com/meteyou/mainsail

---

🌊Fluidd Webinterface by cadriel :

https://github.com/cadriel/fluidd

---

🕸️Duet Web Control by Duet3D :

https://github.com/Duet3D/DuetWebControl

---

🕸️DWC2-for-Klipper-Socket by Stephan3 :

https://github.com/Stephan3/dwc2-for-klipper-socket

---

🐙OctoPrint Webinterface by OctoPrint :

https://octoprint.org
https://github.com/OctoPrint/OctoPrint

---

❓ FAQ

Q: Can i use this script to install multiple instancec of Klipper on the same Pi? (Multisession?)

A: No, and at the moment i don't plan to implement this function. For multisession installations take a look at this script manu7irl created: https://github.com/manu7irl/klipper-DWC2-installer . Keep in mind that klipper-DWC2-installer and KIAUH are NOT compatible with each other.