corundum / corundum

Open source FPGA-based NIC and platform for in-network compute

https://corundum.io/

corundum/corundum Issues

Weird bugs meet with fb2CG and Vivado 2023.2
Updated 14 days ago3
mqnic is not compilent from modern kernel
Updated 25 days ago1
`ethtool enp94s0` doesn't show the information about speed and so on.
Updated 3 months ago7
Porting PCIe example to zu7cg
Closed 3 months ago7
Error "Device needs to be reset" when insmod mqnic.ko
Updated 4 months ago1
Chapter 8.2 of the document is incompleted
Updated 5 months ago1
issues in doc
Updated 5 months ago1
AU50 working with DAC but not Optical
Updated 5 months ago3
petalinux compile error for mqnic module
Closed 5 months ago8
nic
Closed 5 months ago
Accelerating PPPOE
Updated 6 months ago
Does corundum support two devices in a server?
Closed 6 months ago3
Will Xilinx SN1022(Alveo U45N) be supported?
Updated 6 months ago8
An erro during generating project at file "./config.tcl" line 240: ERROR: [Ipptcl 7-29] Invalid param '03f'.
Closed 6 months ago4
port to zc706
Updated 6 months ago1
Tools for AXI Lite register reads/writes and AXI streaming read/writes
Updated 7 months ago21
insmod mqnic.ko error
Updated 7 months ago2
Cocotb with icarus verilog gets frozen stuck at some point during simulation: How to debug?
Closed 7 months ago2
Custom App Ports
Updated 8 months ago2
Document needs to be updated
Updated 8 months ago
Missing prerequisite in makefile
Updated 8 months ago1
How to debug host freeze
Updated 8 months ago14
kernel driver license stated ambigiously
Updated 8 months ago3
Why is distributed RAM used to store packages on the chip, and why is it divided into segment?
Closed 8 months ago
Line rate tests on AU50
Updated 9 months ago5
AXI master to segmented DMA client for application block
Closed 9 months ago1
Unaligned transfer on the DMA interface for the application block
Closed 9 months ago3
How to enable flow control?
Closed 9 months ago15
Support for Alveo U55C
Updated 10 months ago4
AU200 Error: EQ block not found
Closed 10 months ago2
ethtool on AU50 interfaces
Closed a year ago2
No interfaces on Debian
Closed a year ago3
Will XCZU7CG-FFVC1156 be supported?
Updated a year ago1
After insmod mqnic.ko execute lsmod or cat /proc/modules oops
Updated a year ago4
demo for in-network compute application
Updated a year ago1
Firmware update file format
Updated a year ago
Automatic server restart issue when programming fpga.bit
Updated a year ago5
`pcie_user_reset` BUFG replication issues with VU9P (VCU1525)
Updated a year ago3
What should I do about DMA channel in userspace
Updated a year ago
app_block_inst Module
Updated a year ago1
IF_COUNT in NETfpga SUME
Updated a year ago6
Building is failed
Closed a year ago1
I want to implement NetFPGA SUME on HiTech Global Virtex-7 PCI Express Gen3
Updated a year ago1
Is there any possibility that Corundum could be used in optical transport network (OTN)?
Updated a year ago1
Internal error: Cannot run timing on a non-timing device
Updated a year ago2
Adjust PHC time with offset register does not work
Updated a year ago2
How to convert one U250 QSFP28 port to four 10g port?
Closed a year ago6
IF_PTP_PERIOD in 10GbE design
Updated a year ago1
Enable dma_bench app module
Updated a year ago19
XCVU13P support
Updated a year ago1