Bare metal for ARM cortex-M using C++

This example show how to write simple startup code in C++ and use Cmake for building. Presented example is very simple "Hello blinky" program for STM32F0xx which blink LED connected to GPIO A15 and blink on maximum speed (no delay or timers are used).

C++ benefits for embedded

C++ provides many advantages over C, like OOP, namespaces, templates, overloading, references, ...
Also allow to write very clean and readable source code and very efficient final code

Limitations, or not recommended C++ features in embedded

Do not use new and delete (unless you define your own on heap or in static array - memory pool)
No exceptions are allowed and also no components which using exceptions (like most of std::, ...)
No RTTI, ..

Everything from this is also possible to use, but then is necessary to implement some stub functions for heap management and basic IO for newlib. Final compiled program can be much bigger in memory (often more than 80KB) and this also brings some overhead, which is often useless in embedded applications.

Code structure

CmakeLists.txt is Cmake building script
src folder contain application code
src/startup folder contain all startup code
ld folder contain linker scripts
cmake/arm-none-eabi.cmake is platform file which define compilers and configuration for this project

Dependencies

gcc-arm for embedded download here
cmake

this don't need any other dependencies like CMSIS library for building. Example is real bare metal code.

Building

mkdir _build
cd _build
cmake -D CMAKE_TOOLCHAIN_FILE=../cmake/arm-none-eabi.cmake -D CMAKE_BUILD_TYPE=Release ..
make

change CMAKE_BUILD_TYPE=Debug to build debug version.

You can use also make bin, srec, hex, flash, ...

Change architecture

in file CmakeLists.txt change CPU_OPTIONS:

architecture options:
- Cortex-M0: set(CPU_OPTIONS -mthumb -mcpu=cortex-m0)
- Cortex-M0+ set(CPU_OPTIONS -mthumb -mcpu=cortex-m0plus)
- Cortex-M3 set(CPU_OPTIONS -mthumb -mcpu=cortex-m3)
- Cortex-M4 set(CPU_OPTIONS -mthumb -mcpu=cortex-m4)
- Cortex-M7 set(CPU_OPTIONS -mthumb -mcpu=cortex-m7)
- Cortex-M23: set(CPU_OPTIONS -mthumb -mcpu=cortex-m23)
- Cortex-M33: set(CPU_OPTIONS -mthumb -mcpu=cortex-m33)
floating point, add options to CPU_OPTIONS:
- soft float -mfloat-abi=softfp
- hard float -mfloat-abi=hard
for floating point also add fpv architecture
- Cortex-M4 single precision -mfpu=fpv4-sp-d16
- Cortex-M7 and M33 single-precision -mfpu=fpv5-sp-d16
- Cortex-M7 and M33 signle and double-precision -mfpu=fpv5-d16

Detailed info about options is in readme: gcc-arm directory: share/doc/gcc-arm-none-eabi/readme.txt or in ARM-Options document

cortexm / baremetal