Power Pet Door by High Tech Pet

Custom component to allow control and monitoring of the Power Pet Door made by High Tech Pet.

This addon was NOT made by anyone affiliated with High Tech Pet, don't bug them about it!

Install

Ensure you have HACS installed.
Click into Integrations, then select the three dots ... in the top-right corner, and select Custom Repositories
Paste the guthub respository URL (https://github.com/corporategoth/ha-powerpetdoor) into the Repository field, and select Integration as a category, then press ADD.

Once the custom repository is installed into HACS, you should be able to click the button below to install this integration.

Alternatively, you can follow these steps:

Click into Integrations under HACS, then click the + EXPLORE & DOWNLOAD REPOSITORIES button in the lower-right corner.
Search for Power Pet Door, and click it.
Click the DOWNLOAD button in the lower-right corner, then click DOWNLOAD in the dialog box that appears.

Manual Installation

Copy the powerpetdoor directory from custom_components in this repository into the custom_components directory under your Home Assistant's configuration directory.
Restart your Home Assistant.

NOTE: Installing manually means you will also have to upgrade manually.

Setup

Click on the button below to add the integration automatically.

Alternatively, you can follow these steps:

Install this integration.
Navigate to the Home Assistant Integrations (Settings -> Devices & Services).
Click the + ADD INTEGRATION button in the lower right-hand corner.
Search for Power Pet Door, and select it.

Configuration

You can go to the Integrations page and add a Power Pet Door integration.

Option	Required	Default	Description
name	No	Power Pet Door	A pretty name for your Power Pet door entity
host	Yes		The host name or IP address of your Power Pet Door
port	No	3000	The port of your Power Pet Door
timeout	No	10.0	Time out on attempting to connect to your Power Pet Door (seconds)
reconnect	No	5.0	How long to wait between retrying to connect to your Power Pet Door if disconnected (seconds)
keep_alive	No	30.0	How often will we send a PING keep alive message to the Power Pet Door (seconds)
refresh	No	300.0	How often we pull the configuration settings from the Power Pet Door (seconds)
update	No		How often we update the current door position (seconds)

Entities

Entity	Entity Type	Description
`Door`	`Cover`	The main control for the door itself. Acts like a shutter entity.
`Auto`	`Switch`	Enable or disable the door sensors based on a schedule setup in the Power Pet Door app.
`Battery`	`Sensor`	Display the current charge of the battery, if one is attached.
`Cycle`	`Button`	A button to perform the open / close cycle (or close the door if it's holding open).
`Inside Sensor`	`Switch`	Enable or disable detection of a dog collar from the inside of the door.
`Outside Sensor`	`Switch`	Enable or disbale detection of a dog collar from the outside of the door.
`Power`	`Switch`	Turn on or off the pet door (WiFi will stay enabled). Disables ALL buttons, and door operation.
`Outside Safety Lock`	`Switch`	Always allow the pet to come inside, ignoring your schedule.
`Pet Proximity Keep Open`	`Switch`	Keep the pet door open if the pet remains in proximity of the door.
`Auto Retract`	`Switch`	Automatically retract (open) the door if it detects an obstruction while closing.
`Latency`	`Sensor`	The time it's taking for Home Assistant to communicate to the Power Pet Door (round trip).
`Total Open Cycles`	`Sensor`	Total number of times the door has been opened.
`Total Auto-Retracts`	`Sensor`	Total number of times the door re-opened itself due to a detected obsctuction.
`Hold Time`	`Number`	Amount of time (in seconds) to hold the door open during the open/close cycle.
`Sensor Trigger Voltage`	`Number`	Voltage required to trigger the sensor to open the door (based on signal strength).
`Sleep Sensor Trigger Voltage`	`Number`	Voltage required to trigger the sensor to open the door (based on signal strength) while off.
`Notify Inside On`	`Switch`	Notify when your pet goes outside.
`Notify Inside Off`	`Switch`	Notify when your pet tries to go outside, but the Inside sensor is off.
`Notify Outside On`	`Switch`	Notify when your pet comes inside.
`Notify Outside Off`	`Switch`	Notify when your pet tries to come inside, but the Outside sensor is off.
`Notify Low Battery`	`Switch`	Notify when the door's battery is low.
`Inside Schedule`	`Schedule`	The schedule for the automatic enabling/disabling of the Inside Sensor.
`Outside Schedule`	`Schedule`	The schedule for the automatic enabling/disabling of the Outside Sensor.

Attributes

Entity	Attribute	Type	Description
`Door`	`door_status`	`string`	The raw door status as reported by the door itself. This will be one of `DOOR_IDLE`, `DOOR_CLOSED`, `DOOR_HOLDING`, `DOOR_KEEPUP`, `DOOR_SLOWING`, `DOOR_CLOSING_TOP_OPEN`, `DOOR_RISING`, `DOOR_CLOSING_MID_OPEN`).
`Door`	`current_position`	`number`	The position of the door (as a 'percentage open'). This will only ever show 0, 33, 66 or 100.
`Battery`	`battery_discharging`	`boolean`	Whether the battery is draining (ie. the power is disconnected).
`Battery`	`battery_charging`	`boolean`	Whether the battery is charging (ie. power is connected).
`Latency`	`host`	`string`	The IP address (or host name) of the Power Pet Door.
`Latency`	`port`	`number`	The TCP port of the Power Pet Door.
`Latency`	`hw_version`	`string`	The hardware revision of the Power Pet Door device.
`Latency`	`sw_version`	`string`	The firmware revision installed on the Power Pet Door device.
`*`	`last_change`	`timestamp`	The last time the state changed.
`*`	`device_class`	`string`	The device class the entity presents as.
`*`	`state_class`	`string`	The type of sensor this is (should always be `measurement`).
`*`	`unit_of_measurement`	`string`	The unit measured by this sensor.

Sample Card

Here is a sample lovelace card you could configure to control your Power Pet Door.

type: vertical-stack
cards:
  - type: custom:mushroom-cover-card
    entity: cover.power_pet_door_door
    show_position_control: false
    show_buttons_control: true
    fill_container: false
    layout: horizontal
    tap_action:
      action: call-service
      service: button.press
      target:
        entity_id: button.power_pet_door_button
      data: {}
  - type: horizontal-stack
    cards:
      - show_name: true
        show_icon: true
        type: button
        tap_action:
          action: toggle
        entity: switch.power_pet_door_inside_sensor
        name: Inside
      - show_name: true
        show_icon: true
        type: button
        tap_action:
          action: toggle
        entity: switch.power_pet_door_outside_sensor
        name: Outside
      - show_name: true
        show_icon: true
        type: button
        tap_action:
          action: toggle
        entity: switch.power_pet_door_auto
        name: Auto
      - show_name: true
        show_icon: true
        type: button
        tap_action:
          action: toggle
        entity: switch.power_pet_door_power
        name: Power
      - type: gauge
        entity: sensor.power_pet_door_battery
        name: Battery
        needle: false

Credits

Big thanks to the authors of the Envisalink component, which I based a lot of the async networking code off of.

corporategoth / ha-powerpetdoor