Giters
Greg (controlzone)

controlzone

Geek Repo

1

followers

2

following

114

stars

Location:Canberra, Australia

Github PK Tool:Github PK Tool

Greg's starred repositories

NanoVNA

Very Tiny Palmtop Vector Network Analyzer

Language:CStargazers:1033Issues:0Issues:0

pvc-qfh-antenna

Plans for a Quadrifilar Helicoidal antenna

License:Apache-2.0Stargazers:90Issues:0Issues:0

rtlsdr-433m-sensor

Decoder for Oregon Scientific v1 protocol wireless temperature sensors with RTL-SDR and GNU Radio.

Language:PythonStargazers:173Issues:0Issues:0

gr-lora

GNU Radio OOT module implementing the LoRa PHY, based on https://github.com/matt-knight/research/tree/master/2016_05_20_jailbreak

Language:C++License:GPL-3.0Stargazers:469Issues:0Issues:0

gr-dab

GNU Radio DAB (digital audio broadcasting) module

Language:C++License:GPL-3.0Stargazers:83Issues:0Issues:0

gr-satellites

GNU Radio decoder for Amateur satellites

Language:Jupyter NotebookLicense:GPL-3.0Stargazers:759Issues:0Issues:0

pocsag-mrt

POCSAG Multichannel Realtime Decoder

Language:PythonLicense:GPL-3.0Stargazers:1Issues:0Issues:0

op25

Fork of osmocom OP25 by boatbod

Language:C++Stargazers:308Issues:0Issues:0

hackrf

low cost software radio platform

Language:CLicense:GPL-2.0Stargazers:6216Issues:0Issues:0

gr-pocsag-decoder

GNU Radio POCSAG Receiver and Python Decoder

Language:PythonLicense:GPL-3.0Stargazers:12Issues:0Issues:0

gr-mixalot

POCSAG, FLEX, and GSC encoder blocks for GNU Radio

Language:C++License:GPL-3.0Stargazers:121Issues:0Issues:0

bypass-paywalls-chrome

Bypass Paywalls web browser extension for Chrome and Firefox.

Language:JavaScriptStargazers:47604Issues:0Issues:0

battery_sim

Home assistant home battery simulator - allows you to model how much energy you would save with a home battery

Language:PythonStargazers:104Issues:0Issues:0

P1P2MQTT

Monitor and control Daikin/Rotex (hybrid/Altherma) heat pumps via the 2-wire P1/P2 thermostat interface with an ATmega328P, ESP8266, and electronics. The P1P2Serial library and P1P2Monitor program perform low-level bus operation, the P1P2-bridge-esp8266 program interprets data from/to MQTT supporting Home Assistant MQTT discovery. P1P2Serial may also be used for other Japanese Home Bus System based standards: DIII-NET (F1/F2) bus, Mitsubishi M-Net bus, Toshiba TCC-Link, Hitachi H-link, Panasonic/Sanyo SIII-Net, Haier, York, and others.

Language:C++License:NOASSERTIONStargazers:271Issues:0Issues:0

Aircon-Controller

Raspberry Pi controller that provides the ability to control a Mitsubishi ducted air conditioner via its serial communications link so that it can be automated with the provision of temperature sensors in each room and monitoring/control of a two-zone airflow damper.

Language:PythonLicense:MITStargazers:14Issues:0Issues:0

MHI-RC-to-MQTT

Mitsubishi Heavy Industies, Modbus to MQTT

Stargazers:5Issues:0Issues:0

fronius-mqtt-bridge

Reads out a Fronius Symo Hybrid Inverter via Modbus and publishes the data via MQTT.

Language:PythonLicense:MITStargazers:1Issues:0Issues:0

fronius2mqtt

A Fronius HTTP API to MQTT bridge

Language:PythonLicense:BSD-3-ClauseStargazers:5Issues:0Issues:0

TinyCAD

Open Source circuit capture program

Language:CStargazers:118Issues:0Issues:0

pyfronius

Automated JSON API based communication with Fronius Symo

Language:PythonLicense:MITStargazers:26Issues:0Issues:0

mqtt-connectors

Python script to fetch power flow realtime data from a fronius data manager and pubish it to a mqtt broker

Language:PythonLicense:MITStargazers:14Issues:0Issues:0

MHI-AC-SPY

Read data from a Mitsubishi Heavy Industries air conditioner and send the data via MQTT via ESP8266

Language:C++License:MITStargazers:7Issues:0Issues:0

MHI2MQTT

Arduino-based WiFi/MQTT controller for wireless operation of a Mitsubishi Heavy Industries air conditioner through its serial CNS port

Language:C++License:MITStargazers:130Issues:0Issues:0

MHI-AC-Ctrl

Reads and writes data (e.g. power, mode, fan status etc.) from/to a Mitsubishi Heavy Industries (MHI) air conditioner (AC) via SPI controlled by MQTT

Language:C++License:MITStargazers:250Issues:0Issues:0

wattpilot

Optimize your energy consumption

Language:PythonLicense:GPL-2.0Stargazers:10Issues:0Issues:0

boilr

Water boiler automation with a Fronius pv inverter on a Raspberry Pi

Language:PythonLicense:MITStargazers:10Issues:0Issues:0

FroniusSymo

Some code to read data from a Fronius Symo inverter and generate nice graphics.

Language:PythonLicense:BSD-2-ClauseStargazers:3Issues:0Issues:0

Regulator

DIY Arduino consumption regulator build to use excess solar power for auxiliary 'summer' heating. The solar power data are retrieved over SunSpec Modbus TCP. IoT monitoring with Blynk and local Web server.

Language:C++License:AGPL-3.0Stargazers:50Issues:0Issues:0

Dogbone

A Fusion360 addin that creates dogbone joints for wood joinery.

Language:PythonStargazers:42Issues:0Issues:0

DXFImporter

A utility for Fusion 360 to import multiple DXF files.

Language:PythonLicense:MITStargazers:3Issues:0Issues:0