cniesen / IcomClockOmniRig

Set Icom IC-7300/IC-7100 clock via OmniRig

IcomClockOmniRig

Windows command line program for setting the internal clock of the Icom tranceivers like IC-7300, IC-7100 and IC-R8600 via OmniRig.

Download the latest Windows executable at https://github.com/cniesen/IcomClockOmniRig/releases/latest .

Program Options

C:\>IcomClockOmniRig.exe -h
 ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 ::                                                                          ::
 ::   IcomClockOmniRig 2.1  -  https://github.com/cniesen/IcomClockOmniRig   ::
 ::                                                                          ::
 ::    A program to set the Icom tranceiver clock to your computer's time    ::
 ::                                                                          ::
 ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Usage: IcomClockOmniRig.exe [options]
Options:
        -u              Reverse local and UTC time (show UTC as clock and local time as on UTC display)

        -r <number>     The selected rig in OmniRig (default: 1)

        -m <model>      The Icom transceiver model (default: auto detect from OminiRig)
                        Valid models: IC-705, IC-7100, IC-7300, IC-7600, IC-7610, IC-7700, IC-7850, IC-7851, IC-9700, IC-R8600, IC-R9500

        -a <hex>        The Icom transceiver address (default: rig default address)

        -c <hex>        The controller address (default: E0)

        -o <number>     OmniRig version number (default: 1)
                        1 = original OmniRig by VE3NEA
                        2 = updated OmniRig by HB9RYZ

        -q              Quiet, don't output messages
      
        -h              Show this help message

Supported Transceivers

Transceiver	Date Command	Time Command	UTC Offset Command	Transceiver Address	Tested with OmniRig	Tested with OmniRig 2
Icom IC-705	1A050165	1A050166	1A050170	A4
Icom IC-7100	1A050120	1A050121	1A050123	88
Icom IC-7300	1A050094	1A050095	1A050096	94	AE0S (2.1)	AE0S (2.0)
Icom IC-7600	1A050053	1A050054	1A050056	7A
Icom IC-7610	1A050158	1A050159	1A050162	98	VE3NEA (2.0)
Icom IC-7700	1A050058	1A050059	1A050061	74
Icom IC-7850	1A050095	1A050096	1A050099	8E
Icom IC-7851	1A050095	1A050096	1A050099	8E
Icom IC-9700	1A050179	1A050180	1A050184	A2
Icom IC-R8600	1A050131	1A050132	1A050135	96
Icom IC-R9500	1A050048	1A050049	1A050051	72

Tested IcomClockOmniRig version in parentheses.

Adding support for other Icom transceivers should be easy. Create an "Issue" if you needs support for your rig. Other brands like Yaesu and Kenwood might work as well. Voice up if there is a need for this feature.

Please let me know if you have tested the program. I only have access to the Icom IC-7300 so verification that the program runs with other transceivers is very helpful. I will note these in the above table along with the program version that was tested. Any bug reports are greatly appreciated as well. Please use Github Issues or the support email list for this. Thanks.

Demo

Notes

• Since the seconds of the Icom clock can't be set directly, the program needs to wait until the full minute in order to set the time. This means that the program might need up to one minute to run.

• OmniRig will continue to run in background if the program is killed (i.e. CTRL-C or Task Manager -> End Task). This is normal and unavoidable.

• For trouble shooting type echo Exit Code is %errorlevel% after the program has just run to see the exit code.

The application is written in C# with Visual Studio.

Email Lists

• New release announcements: https://groups.io/g/IcomClockOmniRig-Announcements
• Support and discussions: https://groups.io/g/IcomClockOmniRig

License

The code of IcomClockOmniRig has been Licensed under GNU GPL 3.0.