Brod is an erlang implementation of the Apache Kafka protocol, providing support for both producers and consumers.
Why "brod"? http://en.wikipedia.org/wiki/Max_Brod
- Supports Apache Kafka v0.8+
- Robust producer implementation supporting in-flight requests and asynchronous acknowledgements
- Both consumer and producer handle leader re-election and other cluster disturbances internally
- Opens max 1 tcp connection to a broker per "brod_client", one can create more clients if needed
- Producer: will start to batch automatically when number of unacknowledged (in flight) requests exceeds configurable maximum
- Producer: will try to re-send buffered messages on common errors like "Not a leader for partition", errors are resolved automatically by refreshing metadata
- Simple consumer: The poller, has a configurable "prefetch count" - it will continue sending fetch requests as long as total number of unprocessed messages (not message-sets) is less than "prefetch count"
- Group subscriber: Support for consumer groups with options to have Kafka as offset storage or a custom one
- Topic subscriber: Subscribe on messages from all or selected topic partitions without using consumer groups
- lz4 compression & decompression
- new 0.10 on-wire message format
- new 0.10.1.0 create/delete topic api
- SASL authentication
make
make test-env t # requires docker-composer in place
Assuming kafka is running at localhost:9092
and there is a topic named bord-test
.
Below code snippet is copied from Erlang shell with some non-important printouts trimmed.
> rr(brod).
> {ok, _} = application:ensure_all_started(brod).
> KafkaBootstrapEndpoints = [{"localhost", 9092}].
> Topic = <<"brod-test">>.
> Partition = 0.
> ok = brod:start_client(KafkaBootstrapEndpoints, client1).
> ok = brod:start_producer(client1, Topic, _ProducerConfig = []).
> ok = brod:produce_sync(client1, Topic, Partition, <<"key1">>, <<"value1">>).
> ok = brod:produce_sync(client1, Topic, Partition, <<"key2">>, <<"value2">>).
> SubscriberCallbackFun =
fun(Partition, Msg, ShellPid = CallbackState) ->
ShellPid ! Msg,
{ok, ack, CallbackState}
end.
> Receive = fun() -> receive Msg -> Msg after 1000 -> timeout end end.
> brod_topic_subscriber:start_link(client1, Topic, Partitions=[Partition],
_ConsumerConfig=[{begin_offset, earliest}],
_CommittdOffsets=[], SubscriberCallbackFun,
_CallbackState=self()).
> Receive().
#kafka_message{offset = 0,magic_byte = 0,attributes = 0,
key = <<"key1">>,value = <<"value1">>,crc = 1978725405}
> Receive().
#kafka_message{offset = 1,magic_byte = 0,attributes = 0,
key = <<"key2">>,value = <<"value2">>,crc = 1964753830}
> {ok, CallRef} = brod:produce(client1, Topic, Partition, <<"key3">>, <<"value3">>).
> #brod_produce_reply{ call_ref = CallRef,
result = brod_produce_req_acked
} = Receive().
> Receive().
#kafka_message{offset = 2,magic_byte = 0,attributes = 0,
key = <<"key3">>,value = <<"value3">>,crc = -1013830416}
Brod supervision (and process link) tree.
A brod_client
in brod is a gen_server
responsible for establishing and
maintaining tcp sockets connecting to kafka brokers.
It also manages per-topic-partition producer and consumer processes under
two-level supervision trees.
You may include client configs in sys.config have them started by default (by application controller)
Example of configuration (for sys.config):
[{brod,
[ { clients
, [ { brod_client_1 %% registered name
, [ { endpoints, [{"localhost", 9092}]}
, { reconnect_cool_down_seconds, 10} %% socket error recovery
]
}
]
}
%% start another client for another kafka cluster
%% or if you think it's necessary to start another set of tcp connections
]
}]
You may also call brod:start_client/1,2,3
to start a client on demand,
which will be added to brod supervision tree.
ClientConfig = [{reconnect_cool_down_seconds, 10}],
ok = brod:start_client([{"localhost", 9092}], brod_client_1, ClientConfig).
Put below configs to client config in sys.config or app env:
{auto_start_producers, true}
{default_producer_config, []}
brod:start_producer(_Client = brod_client_1,
_Topic = <<"brod-test-topic-1">>,
_ProducerConfig = []).
{ok, CallRef} =
brod:produce(_Client = brod_client_1,
_Topic = <<"brod-test-topic-1">>,
_Partition = 0
_Key = <<"some-key">>
_Value = <<"some-value">>),
%% just to illustrate what message to expect
receive
#brod_produce_reply{ call_ref = CallRef
, result = brod_produce_req_acked
} ->
ok
after 5000 ->
erlang:exit(timeout)
end.
Block calling process until Kafka confirmed the message:
{ok, CallRef} =
brod:produce(_Client = brod_client_1,
_Topic = <<"brod-test-topic-1">>,
_Partition = 0
_Key = <<"some-key">>
_Value = <<"some-value">>),
brod:sync_produce_request(CallRef).
or the same in one call:
brod:produce_sync(_Client = brod_client_1,
_Topic = <<"brod-test-topic-1">>,
_Partition = 0
_Key = <<"some-key">>
_Value = <<"some-value">>).
Client = brod_client_1,
Topic = <<"brod-test-topic-1">>,
PartitionFun = fun(_Topic, PartitionsCount, _Key, _Value) ->
{ok, crypto:rand_uniform(0, PartitionsCount)}
end,
{ok, CallRef} = brod:produce(Client, Topic, PartitionFun, Key, Value).
%% The top-level key is used for partitioning
%% and nested keys are discarded.
%% Nested messages are serialized into a message set to the same partition.
brod:produce(_Client = brod_client_1,
_Topic = <<"brod-test-topic-1">>,
_Partition = MyPartitionerFun
_Key = KeyUsedForPartitioning
_Value = [ {<<"k1", <<"v1">>}
, {<<"k2", <<"v2">>}
, { _KeyDiscarded = <<>>
, [ {<<"k3">>, <<"v3">>}
, {<<"k4">>, <<"v4">>}
]}
]).
Unless brod:produce_sync was called, callers of brod:produce should
expect a message of below pattern for each produce call.
Add -include_lib("brod/include/brod.hrl").
to use the record.
#brod_produce_reply{ call_ref = CallRef %% returned from brod:produce
, result = brod_produce_req_acked
}
NOTE: If required_acks is set to 0 in producer config, kafka will NOT ack the requests, and the reply message is sent back to caller immediately after the message has been sent to the socket process.
In case the brod:produce caller is a process like gen_server which receives ALL messages, the callers should keep the call references in its looping state and match the replies against them when received. Otherwise brod:sync_produce_request/1 can be used to block-wait for acks.
NOTE: The replies are only strictly ordered per-partition. i.e. if the caller is producing to two or more partitions, it may receive replies ordered differently than in which order brod:produce API was called.
Kafka consumers work in poll mode. In brod, brod_consumer
is the poller,
which is constantly asking for more data from the kafka node which is a leader
for the given partition.
By subscribing to brod_consumer
a process should receive the polled message
sets (not individual messages) into its mailbox.
In brod, we have so far implemented two different subscribers
(brod_topic_subscriber
and brod_group_subscriber
),
hopefully covered most of the common use cases.
For maximum flexibility, an applications may implement their own per-partition subscriber.
Below diagrams illustrate 3 examples of how subscriber processes may work
with brod_consumer
.
This gives the best flexibility as the per-partition subscribers work directly with per-partition pollers.
The messages are delivered to subscribers in message sets (batches), not individual messages, (however the subscribers are allowed to ack individual offsets).
A topic subscriber provides the easiest way to receive and process
messages from ALL partitions of a given topic. See brod_demo_cg_collector
and brod_demo_topic_subscriber
for example.
Users may choose to implement the brod_topic_subscriber
behaviour callbacks
in a module, or simply provide an anonymous callback function to have the
individual messages processed.
Similar to topic subscriber, the brod_group_subscriber
behaviour callbacks
are to be implemented to process individual messages. See
brod_demo_group_subscriber_koc
and brod_demo_group_subscriber_loc
for example.
A group subscriber is started by giving a set of topics, some (maybe none, or maybe all) of the partitions in the topic set will be assigned to it, then the subscriber should subscribe to ALL the assigned partitions.
Users may also choose to implement the brod_group_member
behaviour (callbacks
for brod_group_coordinator
) for a different group subscriber (e.g. spawn
one subscriber per partition), see brucke
for example.
-module(my_subscriber).
-export([start/1]).
%% brod_group_subscriber behaviour callback
init(_GroupId, _Arg) -> {ok, []}.
%% brod_group_subscriber behaviour callback
handle_message(_Topic, Partition, Message, State) ->
#kafka_message{ offset = Offset
, key = Key
, value = Value
} = Message,
error_logger:info_msg("~p ~p: offset:~w key:~s value:~s\n",
[self(), Partition, Offset, Key, Value]),
{ok, ack, State}.
%% @doc The brod client identified ClientId should have been started
%% either by configured in sys.config and started as a part of brod application
%% or started by brod:start_client/3
%% @end
-spec start(brod:client_id()) -> {ok, pid()}.
start(ClientId) ->
Topic = <<"brod-test-topic-1">>,
%% commit offsets to kafka every 5 seconds
GroupConfig = [{offset_commit_policy, commit_to_kafka_v2},
{offset_commit_interval_seconds, 5}
],
GroupId = <<"my-unique-group-id-shared-by-all-members">>,
ConsumerConfig = [{begin_offset, earliest}],
brod:start_link_group_subscriber(ClientId, GroupId, [Topic],
GroupConfig, ConsumerConfig,
_CallbackModule = ?MODULE,
_CallbackInitArg = []).
These functions open a connetion to kafka cluster, send a request, await response and then close the connection.
Hosts = [{"localhost", 9092}].
Topic = <<"topic">>.
Partition = 0.
brod:get_metadata(Hosts).
brod:get_metadata(Hosts, [Topic]).
brod:get_offsets(Hosts, Topic, Partition).
brod:fetch(Hosts, Topic, Partition, 1).
This will build a self-contained binary with brod application
make escript
./brod help