clementprevot / home-assistant-idiamant

A Home Assistant custom component to control rolling shutters through the iDiamant by Netatmo gateway.

This integration is not ready yet!

iDiamant by Netatmo - Home Assistant custom integration

This component will set up the following platforms.

Platform	Description
cover	Control your rolling shutter with the iDiamant by Netatmo gateway.
sensor	Show info from iDiamant API.

Installation

1. Using the tool of choice open the directory (folder) for your HA configuration (where you find configuration.yaml).
2. If you do not have a custom_components directory (folder) there, you need to create it.
3. In the custom_components directory (folder) create a new folder called idiamant.
4. Download all the files from the custom_components/idiamant/ directory (folder) in this repository.
5. Place the files you downloaded in the new directory (folder) you created.
6. Restart Home Assistant
7. In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "iDiamant"

Using your HA configuration directory (folder) as a starting point you should now also have this:

custom_components/idiamant/translations/en.json
custom_components/idiamant/translations/fr.json
custom_components/idiamant/translations/sensor.en.json
custom_components/idiamant/translations/sensor.fr.json
custom_components/idiamant/__init__.py
custom_components/idiamant/api.py
custom_components/idiamant/config_flow.py
custom_components/idiamant/const.py
custom_components/idiamant/manifest.json
custom_components/idiamant/sensor.py
custom_components/idiamant/cover.py

Configuration is done in the UI

Contributions are welcome

If you want to contribute to this please read the Contribution guidelines

Credits

This project was generated from @oncleben31's Home Assistant Custom Component Cookiecutter template.

Code template was mainly taken from @Ludeeus's integration_blueprint template

---