cleberb / ansible-role-hardening

Ansible role to apply a security baseline. Systemd edition.

Hardening - the Ansible role

An Ansible role to make a AlmaLinux, Debian, or Ubuntu server a bit more secure. systemd edition.

Requires Ansible >= 2.13.

Available on Ansible Galaxy.

AlmaLinux 8, AlmaLinux 9, Debian 11, Debian 12, Ubuntu 20.04 and Ubuntu 22.04 are supported.

Note

Do not use this role without first testing in a non-operational environment.

Note

There is a SLSA artifact present under the slsa action workflow for verification.

Dependencies

None.

Examples

Playbook

---
- hosts: localhost
  any_errors_fatal: true
  tasks:
    - name: Include the hardening role
      ansible.builtin.include_role:
        name: konstruktoid.hardening
      vars:
        block_blacklisted: true
        sshd_admin_net:
          - 10.0.2.0/24
          - 192.168.0.0/24
          - 192.168.1.0/24
        suid_sgid_permissions: false

ansible-pull with git checkout

---
- hosts: localhost
  any_errors_fatal: true
  tasks:
    - name: Install git
      become: true
      ansible.builtin.package:
        name: git
        state: present

    - name: Checkout konstruktoid.hardening
      become: true
      ansible.builtin.git:
        repo: 'https://github.com/konstruktoid/ansible-role-hardening'
        dest: /etc/ansible/roles/konstruktoid.hardening
        version: v1.15.0

    - name: Include the hardening role
      ansible.builtin.include_role:
        name: konstruktoid.hardening
      vars:
        block_blacklisted: true
        sshd_admin_net:
          - 10.0.2.0/24
          - 192.168.0.0/24
          - 192.168.1.0/24
        suid_sgid_permissions: false

Note regarding UFW firewall rules

Instead of resetting ufw every run and by doing so causing network traffic disruption, the role deletes every ufw rule without comment: ansible managed task parameter and value.

The role also sets default deny policies, which means that firewall rules needs to be created for any additional ports except those specified in the sshd_ports and ufw_outgoing_traffic variables.

Task Execution and Structure

See STRUCTURE.md for tree of the role structure.

Role testing

See TESTING.md.

Role Variables with defaults

./defaults/main/aide.yml

install_aide: true
aide_checksums: sha512

If install_aide: true then AIDE will be installed and configured.

aide_checksums modifies the AIDE Checksums variable. Note that the Checksums variable might not be present depending on distribution.

aide.conf(5)

./defaults/main/auditd.yml

auditd_apply_audit_rules: true
auditd_action_mail_acct: root
auditd_admin_space_left_action: suspend
auditd_disk_error_action: suspend
auditd_disk_full_action: suspend
auditd_flush: sync
auditd_max_log_file: 20
auditd_max_log_file_action: rotate
auditd_mode: 1
auditd_num_logs: 5
auditd_space_left: 75
auditd_space_left_action: email
grub_audit_backlog_cmdline: audit_backlog_limit=8192
grub_audit_cmdline: audit=1

Enable auditd at boot using Grub.

When auditd_apply_audit_rules: 'yes', the role applies the auditd rules from the included template file.

auditd_action_mail_acct should be a valid email address or alias.

auditd_admin_space_left_action defines what action to take when the system has detected that it is low on disk space. suspend will cause the audit daemon to stop writing records to the disk.

auditd_flush: sync tells the audit daemon to keep both the data and meta-data fully sync'd with every write to disk.

auditd_max_log_file_action sets what action to take when the system has detected that the max file size limit has been reached. E.g. the rotate option will cause the audit daemon to rotate the logs. The keep_logs option is similar to rotate except it does not use the num_logs setting. This prevents audit logs from being overwritten.

auditd_space_left_action tells the system what action to take when the system has detected that it is low on disk space. email means that it will send a warning to the email account specified in action_mail_acct as well as sending the message to syslog.

auditd_mode sets auditd failure mode, 0=silent 1=printk 2=panic.

auditd.conf(5)

./defaults/main/compilers.yml

compilers:
  - as
  - cargo
  - cc
  - cc-[0-9]*
  - clang-[0-9]*
  - gcc
  - gcc-[0-9]*
  - go
  - make
  - rustc

List of compilers that will be restricted to the root user.

./defaults/main/crypto_policies.yml

set_crypto_policy: true
crypto_policy: DEFAULT:NO-SHA1

Set and use cryptographic policies if /etc/crypto-policies/config exists and set_crypto_policy: true.

./defaults/main/disablewireless.yml

disable_wireless: false

If true, turn off all wireless interfaces.

./defaults/main/dns.yml

dns: 127.0.0.1 1.1.1.1
fallback_dns: 9.9.9.9 1.0.0.1
dnssec: allow-downgrade
dns_over_tls: opportunistic

IPv4 and IPv6 addresses to use as system and fallback DNS servers. If dnssec is set to "allow-downgrade" DNSSEC validation is attempted, but if the server does not support DNSSEC properly, DNSSEC mode is automatically disabled.

If dns_over_tls is true, all connections to the server will be encrypted if the DNS server supports DNS-over-TLS and has a valid certificate.

systemd option.

./defaults/main/ipv6.yml

disable_ipv6: false
ipv6_disable_sysctl_settings:
  net.ipv6.conf.all.disable_ipv6: 1
  net.ipv6.conf.default.disable_ipv6: 1

If disable_ipv6: true, IPv6 will be disabled.

./defaults/main/limits.yml

limit_nofile_hard: 1024
limit_nofile_soft: 512
limit_nproc_hard: 1024
limit_nproc_soft: 512

Maximum number of processes and open files.

./defaults/main/misc.yml

reboot_ubuntu: false
redhat_signing_keys:
  - 567E347AD0044ADE55BA8A5F199E2F91FD431D51
  - 47DB287789B21722B6D95DDE5326810137017186
epel7_signing_keys:
  - 91E97D7C4A5E96F17F3E888F6A2FAEA2352C64E5
epel8_signing_keys:
  - 94E279EB8D8F25B21810ADF121EA45AB2F86D6A1
epel9_signing_keys:
  - FF8AD1344597106ECE813B918A3872BF3228467C

If reboot_ubuntu: true an Ubuntu node will be rebooted if required.

redhat_signing_keys are RedHat Product Signing Keys.

The epel7_signing_keys, epel8_signing_keys and epel9_signing_keys are release specific Fedora EPEL signing keys.

./defaults/main/module_blocklists.yml

block_blacklisted: false
fs_modules_blocklist:
  - cramfs
  - freevxfs
  - hfs
  - hfsplus
  - jffs2
  - squashfs
  - udf
misc_modules_blocklist:
  - bluetooth
  - bnep
  - btusb
  - can
  - cpia2
  - firewire-core
  - floppy
  - ksmbd
  - n_hdlc
  - net-pf-31
  - pcspkr
  - soundcore
  - thunderbolt
  - usb-midi
  - usb-storage
  - uvcvideo
  - v4l2_common
net_modules_blocklist:
  - atm
  - dccp
  - sctp
  - rds
  - tipc

Blocked kernel modules.

Setting block_blacklisted: true will block, or disable, any automatic loading of blacklisted kernel modules. The reasoning behind this is that a blacklisted module can still be loaded manually with modprobe module_name. Using install module_name /bin/true prevents this.

This will affect modules that the distribution has blacklisted as part of its default setup, or that were added manually at some point, by anyone with access to your system. Please verify the affected modules before turning this on by running modprobe --showconfig | grep '^blacklist'

Note

Disabling the usb-storage module will disable all USB storage devices. If such devices are needed USBGuard, or a similar tool, should be configured accordingly.

./defaults/main/mount.yml

hide_pid: 2
process_group: root

hide_pid sets /proc/<pid>/ access mode.

The process_group setting configures the group authorized to learn processes information otherwise prohibited by hidepid=.

/proc mount options

./defaults/main/ntp.yml

enable_timesyncd: true
fallback_ntp: 2.ubuntu.pool.ntp.org 3.ubuntu.pool.ntp.org
ntp: "0.ubuntu.pool.ntp.org 1.ubuntu.pool.ntp.org"

If enable_timesyncd: true then configure systemd timesyncd, otherwise installing a NTP client is recommended.

./defaults/main/packages.yml

system_upgrade: true
packages_blocklist:
  - apport*
  - autofs
  - avahi*
  - avahi-*
  - beep
  - git
  - pastebinit
  - popularity-contest
  - prelink
  - rpcbind
  - rsh*
  - rsync
  - talk*
  - telnet*
  - tftp*
  - tuned
  - whoopsie
  - xinetd
  - yp-tools
  - ypbind
packages_debian:
  - acct
  - apparmor-profiles
  - apparmor-utils
  - apt-show-versions
  - audispd-plugins
  - auditd
  - cracklib-runtime
  - debsums
  - gnupg2
  - haveged
  - libpam-apparmor
  - libpam-cap
  - libpam-modules
  - libpam-pwquality
  - libpam-tmpdir
  - lsb-release
  - needrestart
  - openssh-server
  - postfix
  - rkhunter
  - rsyslog
  - sysstat
  - systemd-journal-remote
  - tcpd
  - vlock
  - wamerican
packages_redhat:
  - audispd-plugins
  - audit
  - cracklib
  - gnupg2
  - haveged
  - libpwquality
  - openssh-server
  - needrestart
  - postfix
  - psacct
  - python3-dnf-plugin-post-transaction-actions
  - rkhunter
  - rsyslog
  - rsyslog-gnutls
  - systemd-journal-remote
  - vlock
  - words
packages_ubuntu:
  - fwupd
  - secureboot-db
  - snapd

system_upgrade: 'yes' will run apt upgrade or dnf update if required.

Packages to be installed depending of distribution and packages to be removed (packages_blocklist).

./defaults/main/password.yml

faillock_enable: true
faillock:
  admin_group: []
  audit: true
  deny: 5
  dir: /var/run/faillock
  even_deny_root: true
  fail_interval: 900
  local_users_only: true
  no_log_info: false
  nodelay: true
  root_unlock_time: 600
  silent: false
  unlock_time: 600
login_defs:
  login_retries: 5
  login_timeout: 60
  pass_max_days: 60
  pass_min_days: 1
  pass_warn_age: 7
password_remember: 5
pwquality:
  dcredit: -1
  dictcheck: 1
  dictpath: ''
  difok: 8
  enforce_for_root: true
  enforcing: 1
  gecoscheck: 1
  lcredit: -1
  local_users_only: true
  maxclassrepeat: 4
  maxrepeat: 3
  minclass: 4
  minlen: 15
  ocredit: -1
  retry: 3
  ucredit: -1
  usercheck: 1
  usersubstr: 3

faillock_enable set to false for disable faillock library.

password_remember set the size of the password history that the user will not be able to reuse.

Configure the pam_faillock library.

Configure the login.defs configuration.

Configure the libpwquality library.

./defaults/main/sshd.yml

sshd_accept_env: LANG LC_*
sshd_admin_net:
  - 192.168.0.0/24
  - 192.168.1.0/24
sshd_allow_agent_forwarding: false
sshd_allow_groups:
  - sudo
sshd_allow_tcp_forwarding: false
sshd_allow_users:
  - {{ ansible_user | default(lookup('ansible.builtin.env', 'USER')) }}
sshd_authentication_methods: any
sshd_banner: /etc/issue.net
sshd_ca_signature_algorithms:
  - ecdsa-sha2-nistp256
  - ecdsa-sha2-nistp384
  - ecdsa-sha2-nistp521
  - ssh-ed25519
  - rsa-sha2-256
  - rsa-sha2-512
  - ssh-rsa
sshd_kbd_interactive_authentication: false
sshd_ciphers:
  - [e-mail]
  - [e-mail]
  - aes256-ctr
sshd_client_alive_count_max: 1
sshd_client_alive_interval: 200
sshd_compression: false
sshd_config_d_force_clear: false
sshd_config_force_replace: false
sshd_debian_banner: false
sshd_deny_groups: []
sshd_deny_users: []
sshd_gssapi_authentication: false
sshd_host_key_algorithms:
  - [e-mail]
  - [e-mail]
  - ssh-ed25519
  - ssh-rsa
  - [e-mail]
  - [e-mail]
  - [e-mail]
  - ecdsa-sha2-nistp521
  - ecdsa-sha2-nistp384
  - ecdsa-sha2-nistp256
sshd_host_keys_files: []
sshd_host_keys_group: root
sshd_host_keys_mode: "0600"
sshd_host_keys_owner: root
sshd_hostbased_authentication: false
sshd_ignore_rhosts: true
sshd_ignore_user_known_hosts: true
sshd_kerberos_authentication: false
sshd_kex_algorithms:
  - [e-mail]
  - ecdh-sha2-nistp521
  - ecdh-sha2-nistp384
  - ecdh-sha2-nistp256
  - diffie-hellman-group-exchange-sha256
sshd_listen:
  - 0.0.0.0
sshd_log_level: VERBOSE
sshd_login_grace_time: 20
sshd_macs:
  - [e-mail]
  - [e-mail]
  - hmac-sha2-512
  - hmac-sha2-256
sshd_match_addresses: {}
sshd_match_groups: {}
sshd_match_local_ports: {}
sshd_match_users: {}
sshd_max_auth_tries: 3
sshd_max_sessions: 3
sshd_max_startups: '10:30:60'
sshd_password_authentication: false
sshd_permit_empty_passwords: false
sshd_permit_root_login: false
sshd_permit_tunnel: false
sshd_permit_user_environment: false
sshd_ports:
  - 22
sshd_print_last_log: true
sshd_print_motd: false
sshd_print_pam_motd: false
sshd_rekey_limit: 512M 1h
sshd_required_rsa_size: 2048
sshd_sftp_enabled: true
sshd_sftp_only_chroot: true
sshd_sftp_only_chroot_dir: '%h'
sshd_sftp_only_group: ''
sshd_sftp_subsystem: internal-sftp -f LOCAL6 -l INFO
sshd_strict_modes: true
sshd_syslog_facility: AUTH
sshd_tcp_keep_alive: false
sshd_use_dns: false
sshd_use_pam: true
sshd_use_privilege_separation: sandbox
sshd_x11_forwarding: false

Note

CASignatureAlgorithms, Ciphers, HostKeyAlgorithms, KexAlgorithms and MACs will be configured as defined by cryptographic policies if /etc/crypto-policies/config exists and set_crypto_policy: true.

For a explanation of the options not described below, please read https://man.openbsd.org/sshd_config.

Only the network(s) defined in sshd_admin_net are allowed to connect to sshd_ports. Note that additional rules need to be set up in order to allow access to additional services.

OpenSSH login is allowed only for users whose primary group or supplementary group list matches one of the patterns in sshd_allow_groups. OpenSSH login is also allowed for users in sshd_allow_users. To do the opposite and deny access, use the sshd_deny_groups and sshd_deny_users parameters, which in turn have priority over the previous parameters.

sshd_allow_agent_forwarding specifies whether ssh-agent(1) forwarding is permitted.

sshd_allow_tcp_forwarding specifies whether TCP forwarding is permitted. The available options are true|yes or all to allow TCP forwarding, false|no to prevent all TCP forwarding, local to allow local (from the perspective of ssh(1)) forwarding only or remote to allow remote forwarding only.

sshd_authentication_methods specifies the authentication methods that must be successfully completed in order to grant access to a user.

sshd_log_level gives the verbosity level that is used when logging messages.

sshd_max_auth_tries and sshd_max_sessions specifies the maximum number of SSH authentication attempts permitted per connection and the maximum number of open shell, login or subsystem (e.g. sftp) sessions permitted per network connection.

sshd_password_authentication specifies whether password authentication is allowed.

sshd_ports specifies the port(s) number that sshd(8) listens on.

sshd_required_rsa_size, RequiredRSASize, will only be set if SSH version is higher than 9.1.

sshd_config_d_force_clear force clear directory /etc/ssh/sshd_config.d. Default: false.

sshd_config_force_replace force replace configuration file /etc/ssh/sshd_config. Default: false.

Note

By default, the role checks whether the directory /etc/ssh/sshd_config.d exists and whether it is linked via the Include parameter in the /etc/ssh/sshd_config file, if so, an additional configuration file is created in / etc/ssh/sshd_config.d, if not, the /etc/ssh/sshd_config file is overwritten.

Warning

If any sshd_match_(users|groups|addresses|local_ports) or sshd_sftp_only_group parameters is set, the value true will be implicit.

sshd_host_keys_files host keys for sshd. If empty ['/etc/ssh/ssh_host_rsa_key', '/etc/ssh/ssh_host_ecdsa_key', '/etc/ssh/ssh_host_ed25519_key'] will be used, as far as supported by the installed sshd version.

sshd_host_keys_owner set owner of host keys for sshd. Default: root. sshd_host_keys_group set group of host keys for sshd. Default: root. sshd_host_keys_mode set permission of host keys for sshd. Default: "0600".

sshd_match_users add a conditional block for users. If all of the criteria on the Match line are satisfied, the rules/parameters defined on the following lines override those set in the global section of the config file, until either another Match line or the end of the file.

Expected configuration structure:

sshd_match_users:
  - user: <username>
    rules:
      - <parameter sshd> <value>
      - <parameter sshd> <value>

Example, allow ubuntu user access through password authentication and allow ansible user access without banner:

sshd_match_users:
  - user: ubuntu
    rules:
      - AllowUsers ubuntu
      - AuthenticationMethods password
      - PasswordAuthentication yes
  - user: ansible
    rules:
      - AllowUsers ansible
      - Banner none

sshd_match_groups add a conditional block for groups. More details and examples in the parameter description sshd_match_users.

Expected configuration structure:

sshd_match_groups:
  - group: <groupname>
    rules:
      - <parameter sshd> <value>
      - <parameter sshd> <value>

sshd_match_addresses add a conditional block for adddresses. More details and examples in the parameter description sshd_match_users.

Expected configuration structure:

sshd_match_addresses:
  - address: <ip>
    rules:
      - <parameter sshd> <value>
      - <parameter sshd> <value>

sshd_match_local_ports add a conditional block for ports. More details and examples in the parameter description sshd_match_users.

Expected configuration structure:

sshd_match_ports:
  - port: <port>
    rules:
      - <parameter sshd> <value>
      - <parameter sshd> <value>

sshd_print_pam_motd specifies whether printing of the MOTD via pam (Debian and Ubuntu). Default: false.

sshd_sftp_enabled specifies whether enabled sftp configuration. Default: true. sshd_sftp_subsystem Set external subsystem for file transfer daemon. Default: internal-sftp -f LOCAL6 -l INFO. sshd_sftp_only_group specifies the name of the group that will have access restricted to the sftp service only. Default: "". sshd_sftp_only_chroot specifies group access will be via chroot isolation. Default: true. sshd_sftp_only_chroot_dir specifies the chroot directory. Accepts the tokens %% (a literal %), %h (home directory of the user), and %u (username). Default: "%h".

sshd_syslog_facility set the facility code that is used when logging messages from sshd.Default: AUTH.

./defaults/main/suid_sgid_blocklist.yml

suid_sgid_permissions: true
suid_sgid_blocklist:
  - 7z
  - aa-exec
  - ab
  - agetty
  - alpine
  - ansible-playbook
  - ansible-test
  - aoss
  - apt
  - apt-get
  [...]

If suid_sgid_permissions: true loop through suid_sgid_blocklist and remove any SUID/SGID permissions.

A complete file list is available in defaults/main/suid_sgid_blocklist.yml and is based on the work by @GTFOBins.

./defaults/main/sysctl.yml

sysctl_dev_tty_ldisc_autoload: 0
sysctl_net_ipv6_conf_accept_ra_rtr_pref: 0

ipv4_sysctl_settings:
  net.ipv4.conf.all.accept_redirects: 0
  net.ipv4.conf.all.accept_source_route: 0
  net.ipv4.conf.all.log_martians: 1
  net.ipv4.conf.all.rp_filter: 1
  net.ipv4.conf.all.secure_redirects: 0
  net.ipv4.conf.all.send_redirects: 0
  net.ipv4.conf.all.shared_media: 0
  net.ipv4.conf.default.accept_redirects: 0
  net.ipv4.conf.default.accept_source_route: 0
  net.ipv4.conf.default.log_martians: 1
  net.ipv4.conf.default.rp_filter: 1
  net.ipv4.conf.default.secure_redirects: 0
  net.ipv4.conf.default.send_redirects: 0
  net.ipv4.conf.default.shared_media: 0
  net.ipv4.icmp_echo_ignore_broadcasts: 1
  net.ipv4.icmp_ignore_bogus_error_responses: 1
  net.ipv4.ip_forward: 0
  net.ipv4.tcp_challenge_ack_limit: 2147483647
  net.ipv4.tcp_invalid_ratelimit: 500
  net.ipv4.tcp_max_syn_backlog: 20480
  net.ipv4.tcp_rfc1337: 1
  net.ipv4.tcp_syn_retries: 5
  net.ipv4.tcp_synack_retries: 2
  net.ipv4.tcp_syncookies: 1

ipv6_sysctl_settings:
  net.ipv6.conf.all.accept_ra: 0
  net.ipv6.conf.all.accept_redirects: 0
  net.ipv6.conf.all.accept_source_route: 0
  net.ipv6.conf.all.forwarding: 0
  net.ipv6.conf.all.use_tempaddr: 2
  net.ipv6.conf.default.accept_ra: 0
  net.ipv6.conf.default.accept_ra_defrtr: 0
  net.ipv6.conf.default.accept_ra_pinfo: 0
  net.ipv6.conf.default.accept_ra_rtr_pref: 0
  net.ipv6.conf.default.accept_redirects: 0
  net.ipv6.conf.default.accept_source_route: 0
  net.ipv6.conf.default.autoconf: 0
  net.ipv6.conf.default.dad_transmits: 0
  net.ipv6.conf.default.max_addresses: 1
  net.ipv6.conf.default.router_solicitations: 0
  net.ipv6.conf.default.use_tempaddr: 2

generic_sysctl_settings:
  fs.protected_fifos: 2
  fs.protected_hardlinks: 1
  fs.protected_symlinks: 1
  fs.suid_dumpable: 0
  kernel.core_uses_pid: 1
  kernel.dmesg_restrict: 1
  kernel.kptr_restrict: 2
  kernel.panic: 60
  kernel.panic_on_oops: 60
  kernel.perf_event_paranoid: 3
  kernel.randomize_va_space: 2
  kernel.sysrq: 0
  kernel.unprivileged_bpf_disabled: 1
  kernel.yama.ptrace_scope: 2
  net.core.bpf_jit_harden: 2

conntrack_sysctl_settings:
  net.netfilter.nf_conntrack_max: 2000000
  net.netfilter.nf_conntrack_tcp_loose: 0

sysctl configuration.

sysctl.conf

./defaults/main/templates.yml

adduser_conf_template: etc/adduser.conf.j2
common_account_template: etc/pam.d/common-account.j2
common_auth_template: etc/pam.d/common-auth.j2
common_password_template: etc/pam.d/common-password.j2
coredump_conf_template: etc/systemd/coredump.conf.j2
hardening_rules_template: etc/audit/rules.d/hardening.rules.j2
hosts_allow_template: etc/hosts.allow.j2
hosts_deny_template: etc/hosts.deny.j2
initpath_sh_template: etc/profile.d/initpath.sh.j2
issue_template: etc/issue.j2
journald_conf_template: etc/systemd/journald.conf.j2
limits_conf_template: etc/security/limits.conf.j2
logind_conf_template: etc/systemd/logind.conf.j2
login_defs_template: etc/login.defs.j2
login_template: etc/pam.d/login.j2
logrotate_conf_template: etc/logrotate.conf.j2
motd_template: etc/motd.j2
resolved_conf_template: etc/systemd/resolved.conf.j2
rkhunter_template: etc/default/rkhunter.j2
ssh_config_template: etc/ssh/ssh_config.j2
sshd_config_template: etc/ssh/sshd_config.j2
system_conf_template: etc/systemd/system.conf.j2
timesyncd_conf_template: etc/systemd/timesyncd.conf.j2
useradd_template: etc/default/useradd.j2
user_conf_template: etc/systemd/user.conf.j2

Paths in order to support overriding the default role templates.

./defaults/main/ufw.yml

ufw_enable: true
ufw_outgoing_traffic:
  - 22
  - 53
  - 80
  - 123
  - 443
  - 853

ufw_enable: true installs and configures ufw with related rules. Set it to false in order to install and configure a firewall manually. ufw_outgoing_traffic opens the specific ufw ports, allowing outgoing traffic.

./defaults/main/umask.yml

umask_value: "077"

Set default umask value.

./defaults/main/users.yml

delete_users:
  - games
  - gnats
  - irc
  - list
  - news
  - sync
  - uucp

Users to be removed.

Recommended Reading

Comparing the DISA STIG and CIS Benchmark values

Center for Internet Security Linux Benchmarks

Common Configuration Enumeration

DISA Security Technical Implementation Guides

SCAP Security Guides

Security focused systemd configuration

Contributing

Do you want to contribute? Great! Contributions are always welcome, no matter how large or small. If you found something odd, feel free to submit a issue, improve the code by creating a pull request, or by sponsoring this project.

License

Apache License Version 2.0

Author Information

https://github.com/konstruktoid