classicrocker883 / MRiscoCProUI

This is optimized firmware for Voxelab Aquila & Ender3 V2/S1 3D printers.

https://classicrocker883.github.io/

classicrocker883/MRiscoCProUI Issues

[BUG] Mesh inset settings do nothing
Closed 25 days ago53
[BUG] Dangerous behavior when homing
Closed a month ago22
[BUG] Ultra-fast movements during G28 homing
Closed a month ago1
[BUG] SKR 3 E3V3 Hotend Fan not working
Closed a month ago19
[BUG] Spontaneous excessive homing feedrate
Closed a month ago2
[BUG] after homing, fast movements with skipped steps
Updated 2 months ago2
[FR] Need ability to Raise Acceleration...
Updated 2 months ago10
[BUG] Printer Blacks Out After Upgrading
Updated 2 months ago11
Hot end temperature problem
Closed 2 months ago5
[BUG] skr mini e3 v3 - icon click freezes
Closed 2 months ago4
[BUG] 4.2.7 bed tramming doesn't work
Closed 6 months ago2
[BUG] - Freeze after choosing to load more filament
Closed 6 months ago13
[BUG] H32 Temperature won't stablize, even after PID tuning.
Closed 6 months ago10
does not allow saving mesh aquila s3 crashes [BUG]
Closed 6 months ago4
[BUG] Some icons are missing for DWIN LCD
Closed 6 months ago13
[BUG] Not working [-PLR] | No funciona
Closed 6 months ago6
Starting.....please wait [BUG]
Closed 6 months ago5
[BUG] MicroProbe V2 Can't Home
Closed 6 months ago2
System crashes and settings are lost after new bed mesh is saved.
Closed 5 months ago4
[BUG] ABL-BLT not working properly
Closed 5 months ago39
When FT_Motion enabled Print doesn't start and Homing failure [BUG]
Closed 5 months ago23
[BUG] Not raising Z at stop printing
Closed 3 months ago13
[BUG] Once "Turn off LCD" button is pressed, you will need to press twice to get the ability to scroll.
Updated 4 months ago1
[BUG] Warning with NOZZLE_PARK_FEATURE disabled
Closed 4 months ago3
[BUG] Bed collision - Micro bed probe 2 not detecting bed
Updated 4 months ago2
Settings not being saved[BUG]
Closed 7 months ago5
[BUG] Mesh Fade setting
Closed 7 months ago7
[BUG] Aquila. NoPro version does not move the carriage while creating a level map
Closed 7 months ago25
[BUG] aquila-N32-MP
Closed 7 months ago23
[BUG] IS extruder steps
Closed 7 months ago5
[BUG] Can't get a UBL Mesh to complete/save
Closed 10 months ago16
VERY DANGEROUS: hot end temperature is read incorrectly [BUG]
Closed 10 months ago4
ender extender[FR]
Closed 10 months ago3
[BUG] LASER_SYNCHRONOUS_M106_M107 breaks fan control menu
Closed 10 months ago8
[BUG] When printing, menu 'Hotend temp graph' not closing when press button 'Continue'
Closed 10 months ago7
won't let me print[BUG]
Closed 10 months ago11
[BUG] TJC display screen artifacts
Closed a year ago23
Not Printing when it says printing
Closed 10 months ago17
Timer never starts again after screen turns off [BUG]
Closed 9 months ago3
[BUG] Cancelling build mesh requires restart before being able to rebuild another mesh
Closed 9 months ago19
[FR] power loss function
Closed 10 months ago16
Hotend and board fans stopped booting after I used "change filament" during a print
Closed 9 months ago3
[BUG] Display scrolls backward
Closed a year ago4
[BUG] Mesh gets lost after restart
Closed a year ago7
Print finishes after heat up and doesn't print anything
Closed a year ago3
[BUG] LCD Backlight Timeout and Encoder Tick menu interfere with each other
Closed a year ago5
[FR] GD32 512k build environment
Closed a year ago11
[FR] Add release/configuration for Aquila X3
Closed a year ago28
[BUG] Unintended release updates?
Closed a year ago3
[LICENSE] Your Wiki is almost a copy of the Professional Firmware Wiki
Closed a year ago2