- This project is extract version from meta-mender-community
- https://github.com/mendersoftware/meta-mender-community
- https://hub.mender.io/t/beaglebone-black/83
- The meta-mender-community project use u-boot + grub but this only use u-boot
- https://docs.mender.io/operating-system-updates-yocto-project/board-integration/bootloader-support/u-boot
- https://docs.mender.io/operating-system-updates-yocto-project/board-integration/bootloader-support/u-boot/manual-u-boot-integration
- Add CAN interface (SocketCAN) and CAN tools
mkdir my-mender-bbb
cd my-mender-bbb
repo init -u git@github.com:charlie388/meta-my-mender-bbb.git -b kirkstone
repo sync
source setup-environment
- modify MENDER_SERVER_URL in conf/local.conf, then do below
bitbake core-image-base
BBB connect MCP2518FD controller with SPI interface
commit: c427e5301ac2805086e4dba00464020557a60d81
MCP2518FD board bottom side label
BBB connect CAN transceiver(SN65HVD230) using internal CAN controller(CONFIG_CAN_C_CAN)
commit: 3b00f8280d3ff925854bab29d2ff529fb8bf0614
how to install repo on ubuntu 22.04:
- https://gerrit.googlesource.com/git-repo#install
- https://source.android.com/docs/setup/download#installing-repo
sudo apt-get install python-is-python3
mkdir -p ~/.bin
curl https://storage.googleapis.com/git-repo-downloads/repo > ~/.bin/repo
chmod a+rx ~/.bin/repo
Add PATH on ~/.bashrc
export PATH="${HOME}/.bin:${PATH}"