This layer installs the binaries needed to perform certification testing on the Qualcomm wireless radio used on the Digi Connectcore platforms.
This layer supports ALL ConnectCore 6 family SBC and SOM variants possessing the Qualcomm QCA6564 wireless radio.
- ConnectCore 6N
- ConnectCore 6UL
- ConnectCore 6Plus
- ConnectCard for i.MX28N (dey-1.6 ONLY)
The original ConnectCore 6 (SBC/SOM) with the Atheros AR62xx wireless radio is NOT supported.
This layer has been tested against the following Digi Embedded Yocto (DEY) releases.
- dey-3.2 (gatesgarth)
- dey-3.0 (zeus)
- dey-2.6 (thud)
- dey-2.4 (rocko)
- dey-2.2 (morty)
- dey-2.0 (jethro)
- dey-1.6 (daisy)
-
Install Digi Embedded Yocto (DEY), per the published instructions.
-
Clone meta-cert-tool layer to your local workstation.
#> cd <DEY-INSTALLDIR>/sources #> git clone https://github.com/chaegle/meta-cert-tools.git
-
Create a project for your ConnectCore 6[N|UL|Plus] target platform.
#> mkdir <project-dir> #> cd <project-dir> #> . <DEY-INSTALLDIR>/mkproject.sh -p <target_platform>
-
Add the cert-tools layer to the project's bblayers.conf configuration file.
#> bitbake-layers add-layer <DEY-INSTALLDIR>/sources/meta-cert-tools
-
Edit the project's local.conf, adding the below line.
IMAGE_INSTALL_append = " cert-tools"
-
Build the images.
#> bitbake dey-image-qt
-
Deploy the images.
-
The Btdiag and Qcmbr applications can be found in /usr/sbin.
Insert appropriate license statement here...