cenobitedk / esp-multical21

Kamstrup Multical 21 water meter in Home Assistant (Wireless MBus)

Kamstrup Multical 21 water meter in Home Assistant (Wireless MBus)

Features

• Configuration ready for Home Assistan with MQTT.
• Support for AES-128 decryption (with vaild key).
• CRC Check of recived data.
• Wireless reading of data.
• Easy to build and configure.

Parts

Use these arfilliate links to support me!
CC1101 Module
ESP32 DevKit
Some cables

Wiring

CC1101	ESP32
VCC	3V3
GND	GND
CSN	P4
MOSI	P23
MISO	P19
SCK	P18
GD0	P32
GD2	Not Connected

Build and Upload Firmware

• Make sure you have a decryption key for your meter (you need to ask your water service provider for it).
• Read the serial number on the meter (typically S/N: XXXXXXXX/A/20, the serial number is the XXXXXXXXX part).
• Rename credentials_template.h to credentials.h and add your details.
• Compile and upload:
  • You need VS Code and the PIO Plugin
  • Open the project folder with the platformio.ini file (File -> Open Folder...), connect the ESP32 via USB then build and upload with Ctrl+Alt+U.

Home Assistant

Setup MQTT if you don't already have it.

Add this to configuration.yaml

mqtt:
  sensor:
    - name: "Water Meter Usage"
      state_topic: "watermeter/0/sensor/mydatajson"
      unit_of_measurement: "m³"
      value_template: "{{ value_json.CurrentValue }}"
      device_class: water
      state_class: total_increasing
      availability:
        - topic: "watermeter/0/online"
          payload_available: "True"
          payload_not_available: "False"
    - name: "Water Meter Month Start Value"
      state_topic: "watermeter/0/sensor/mydatajson"
      unit_of_measurement: "m³"
      value_template: "{{ value_json.MonthStartValue }}"
      device_class: water
      state_class: total_increasing
    - name: "Water Meter Room Temperature"
      state_topic: "watermeter/0/sensor/mydatajson"
      value_template: "{{ value_json.RoomTemp }}"
      unit_of_measurement: "°C"
    - name: "Water Meter Water Temperature"
      state_topic: "watermeter/0/sensor/mydatajson"
      value_template: "{{ value_json.WaterTemp }}"
      unit_of_measurement: "°C"

This is a based on chester4444/esp-multical21. Thanks to chester4444for his effort.