A collection of macros for the Ooznest Workbee CNC router with a Duet 3D controller board.
Specially useful if using your machine with the PanelDue display.
Just copy the contents into the "macros" folder on the Duet's microSD card. You can also do that via web interface.
To move the tool to a pre-determined positions on your CNC. Change it to fit your needs and the size of your machine.
Change among different WCS (work coordinate system).
Use the Ooznest touch probe to set the Work Coordinates. The macros will set it to the CURRENT WCS. Choose the appropriate WCS before running the probing.
Jog the tool to the desired position and set it to Zero manually. The macros will set the WCS 2 automatically.
Use a digital calliper or dial indicator to measure 10mm of movement in each axis and calibrate the steps/mm of each axis.
Change to the machine coordinate system
Change to the most usual Work Coordinate System
Move the tool to the origin of the WCS 2 (only on the X and Y axis)