cara / firewalla

http://firewalla.com

Firewalla (Beta)

Support https://help.firewalla.com (email [e-mail])

Current Stable Branch: release_6_0 Current Beta Branch: beta_6_0

Install From Image

If you have Raspberry Pi 3 and want a preview.  The preview image is a over 6 months old.  
Download https://github.com/firewalla/firewalla/releases/download/1.6/firewalla1.6a.img.gz
Prepare a blank microsd card > 8GB size
Follow the same step as installing a raspberry pi image
https://www.raspberrypi.org/documentation/installation/installing-images/

We are focusing on delivering the official hardware, hence Raspberry Pi support is a bit lacking, we are hoping to pick it up soon. We will be very likely selling a development version of Firewalla very soon. It will be at cost with a small mark up to take care the labor involved.

To Build On Raspberry Pi

• Download Jessie Lite

https://www.raspberrypi.org/downloads/raspbian/
follow direction to flash this to a card

• Boot Pi and update

sudo apt-get update
sudo apt-get -y  dist-upgrade
sudo apt-get -y install git

• Configure Pi

- sudo raspi-config
- Change Password
- Host Name
- Advance Options -> Memory Split (Change to 16)
- Expand File System
- Reboot

• Install On Device

git clone https://github.com/firewalla/firewalla --branch release_pi_1_0 --single-branch
cd firewalla
./buildraw
sudo apt-get clean


** for development please create your own branch. (release_pi_1_0 is for official releases)

Build On Docker (Beta, for development purpose only)

cd docker
docker build -f Dockerfile2 -t firewalla .
docker run --privileged -p 8833:8833 -p 8834:8834 -ti firewalla
# to get an interactive shell
docker run --privileged -p 8833:8833 -p 8834:8834 -ti firewalla su - pi

Get iPhone Software

Encipher Connect is a secure messenger used to talk to Raspberry Pi.

https://itunes.apple.com/us/app/firewalla/id1180904053

• connect ethernet port to router.
• install firewalla from app store.
• launch firewalla
• tap on 'Firewalla' and connect

If anything bad happens, unplug it. :) The raspberry pi version uses bluetooth to link the app with the board. Final hardware will require a scan of a barcode.

Contributions

• origin/master: latest / greatest
• release_pi_1: current released code for pi, will be pulled automatically by all deployed boards.
• dev_<>: development branchs.
• Please do a pull request for features

Following Routers are NOT supported in simple mode.

ACTIONTEC

• T3200M

ASUS

• N600 RT-N56U (NAT Acceleration must be turned off)

GOOGLE

• OnHub TGR-1900 (TP-Link)
• OnHub SRT-AC1900 (ASUS)

LINKSYS

• N600 EA2500 (Not support guest network)
• AC1900 EA7500 (Express Forwarding must be disabled)
• AC2400 EA8350
• AC2600 Max-Stream EA8500 (Express Forwarding must be disabled)

NETGEAR

• N600 WNDR3400 (Not compatible with guest network)
• AC1600 R6250
• AC1750 R6400
• AC2350 Nighthawk X4 R7500
• AC2600 Nighthawk X4S R7800

DHCP Mode

DHCP mode should work with most of the routers out there. Except google.* router.