Libraries used in UPF
sudo apt-get -y update
sudo apt-get -y install git gcc g++ cmake go libmnl-dev autoconf libtool libyaml-dev
go get github.com/sirupsen/logrus
Linux kernel module 5G GTP-U (Linux kernel version = 5.0.0-23-generic or version >= 5.4)
git clone -b v0.3.2 https://github.com/free5gc/gtp5g.git
cd gtp5g
make
sudo make install
mkdir build
cd build
cmake ..
make -j`nproc`
cd build/bin
./testutlt
After building from sources, edit ./build/config/upfcfg.yaml
- (Must) IPv4 forwarding
# Uncomment lines under /etc/sysctl.conf as below
net.ipv4.ip_forward=1
- (Recommend) Forwarding chain in iptables can forward packet
sudo apt install iptables-persistent netfilter-persistent
sudo iptables -A FORWARD -j ACCEPT
sudo netfilter-persistent save
sudo systemctl enable netfilter-persistent
sudo systemctl restart netfilter-persistent
- (Recommend) Close ubuntu firewall
sudo systemctl stop ufw
sudo systemctl disable ufw
- (Optional) Using NAT for UE to access data network
sudo apt install iptables-persistent netfilter-persistent
sudo iptables -t nat -A POSTROUTING -o <DN_Interface_Name> -j MASQUERADE
sudo netfilter-persistent save
sudo systemctl enable netfilter-persistent
sudo systemctl restart netfilter-persistent
# (Must) IPv4 forwarding
sudo sysctl -a | grep forward # check sys rule
sudo sysctl -w net.ipv4.ip_forward=1
# (Recommend) Forwarding chain in iptables can forward packet
sudo iptables -A FORWARD -j ACCEPT
# (Recommend) Close ubuntu firewall
sudo systemctl stop ufw
sudo systemctl disable ufw
# (Optional) Using NAT for UE to access data network
sudo iptables -t nat -A POSTROUTING -o <DN_Interface_Name> -j MASQUERADE
cd build
sudo -E ./bin/free5gc-upfd
To show usage: ./bin/free5gc-upfd -h
ls /dev/mqueue/
rm /dev/mqueue/*
sudo ip l del upfgtp