bungambohlah / WSL2HyperVSwitch

Recipe: Persistent Network Configuration in WSL 2 using Hyper-V Virtual Switch

Recipe: Persistent Network Configuration in WSL 2 using Hyper-V Virtual Switch

Problem Description

Connecting to services running in WSL 2 from external sources can be challenging due to the instances being on a different network. This guide offers a solution to replace the internal virtual switch of WSL 2 with an external version in Windows 20H2 (WSL 2.0) and configure it for better networking control.

Solution Overview

This recipe uses a Hyper-V virtual switch to bridge the WSL 2 network, providing improved control and visibility of Windows' network adapters within Ubuntu. The configuration supports both dynamic and static IP addressing, eliminating the need for port forwarding and simplifying network setup.

Steps

1. Enable Hyper-V and Management PowerShell Features:

   • Open PowerShell as administrator and run:

     Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V
     Enable-WindowsOptionalFeature -Online -FeatureName Microsoft-Hyper-V-Management-PowerShell

2. Create an External Virtual Switch in Hyper-V:

   • Open PowerShell as administrator and run:

     New-VMSwitch -Name "External Switch" -NetAdapterName eth0

3. Modify the WSL Configuration:

   • Create or modify the .wslconfig file in your user profile directory ($env:USERPROFILE/.wslconfig) with the following content:

     [wsl2]
     networkingMode=bridged
     vmSwitch="External Switch"
     dhcp=true
     ipv6=true
     

4. Enable systemd in the WSL Distribution:

   • Edit the /etc/wsl.conf file in your WSL distribution and add the following lines:

     [boot]
     systemd=true
     [network]
     hostname = HOSTAGE
     generateResolvConf = false
     

5. Configure Network Addressing:

   • For dynamic address configuration, ensure the following is present in /etc/systemd/network/10-eth0.network:

     [Match]
     Name=eth0
     [Network]
     DHCP=yes
     

   • For static address configuration, use:

     [Match]
     Name=eth0
     [Network]
     Address=192.168.x.xx/24
     Gateway=192.168.x.x
     DNS=192.168.x.x
     

6. Link systemd Resolv.conf:

   • Create a symbolic link to link resolv.conf from systemd:

     ln -sfv /run/systemd/resolve/resolv.conf /etc/resolv.conf

7. Verification:

   • Restart the WSL 2 instance and verify the network configuration with:

     ip addr show eth0