CO2 Sensor
Hardware
- Development board M5StickC Plus
- Sensor MH-Z19B
Features
- CO2 (Carbon dioxide) level continuous output (400-5000 ppm)
- Temperature output (internal sensor)
- 24h history chart available from built-in Web server
- CO2 alarming using built-in LED
- Day/Night screen mode
- Current and 3h forecast weather
Dev Environment
Project uses PlatformIO IDE targeting Espressiff's ESP32 and Arduino framework.
Configuration
- Wifi SSID name and password to access weather and NTP
- Timezone (in seconds, e.g., 3600 for UTC+1)
- NTP Server name (e.g., europe.pool.ntp.org)
- CO2 alarm threshold (e.g., 1000)
- City and API Key to read data from openweathermap.org
User Manual
On first power on devices need to be configured. Connect to "CO2_Sensor" Wi-Fi AP and then go to http://192.168.1.1. Edit configuration and confirm with Update button. After devices rebooted you should see current CO2 measure, temperature, current weather and 3h forecast.
To see sensor values history, go to device IP or scan QR code that is available after pressing BtnA.
To reboot, press power button shortly.
To factory reset, use BtnA to switch display until "Factory?" shown. Confirm with button BtnB.
To edit settings, use BtnA to switch display until "Edit?" shown. Confirm with button BtnB.
To calibrate MH-Z19B zero point use "Calibrate" option. Refer to MH-Z19B manual for details.