The main usage for this module is supporting Home Assistant / home-assistant
There are in total 23 sensors available:
1) Battery power #power-flow on the AC-side of the inverter-charger
unit_of_measurement: "W"
2) Consumed from Battery #total provided AC power from the batteries
unit_of_measurement: "kWh"
3) Stored in Battery ` #total stored AC power into the batteries
unit_of_measurement: "kWh"
4) uCHP power #power-flow from any electricity-producing device, other than from solar energy
unit_of_measurement: "W"
5) uCHP production #total uCHP production
unit_of_measurement: "kWh"
6) uCHP consumption #total uCHP consumption
unit_of_measurement: "kWh"
7) PV power #power-flow of the solar-inverterconnection
unit_of_measurement: "W"
8) PV consumption #total solar-inverter consumption
unit_of_measurement: "kWh"
9) PV production #total solar-inverter production
nit_of_measurement: "kWh"
10) EV power #power-flow of the Electrical Vehicle connection
unit_of_measurement: "W"
11) EV consumption #total EV consumption
unit_of_measurement: "kWh"
12) EV production #total EV production
unit_of_measurement: "kWh"
13) Main power #power-flow of the electrical connection connected to the main meter
(When there is no Smart Meter with P1-port, a suitable electricity-meter can be read out instead)
unit_of_measurement: "W"
14) Main consumption #total Electricity consumption
unit_of_measurement: "kWh"
15) Main production #total Electricity production
unit_of_measurement: "kWh"
16) DSMR timestamp #When a Smart Meter with P1-port is present, this and the below data is coming from the Smart Meter
17) E net consumption #power-flow of the electrical connection connected to the DSMR meter with p1-port
unit_of_measurement: "W"
18) E low in totals #total Electricity consumption - low tariff
unit_of_measurement: "kWh"
19) E low out totals #total Electricity export - low tariff
unit_of_measurement: "kWh"
20) E high in totals #total Electricity consumption - high tariff
unit_of_measurement: "kWh"
21) E high out totals #total Electricity export - high tariff
unit_of_measurement: "kWh"
22) Gas rate #gas-flow, works only with an analog gas meter, needs a special add on
unit_of_measurement: "m3/hr"
23) Gas totals #total gas consumption
unit_of_measurement: "m3"
Install the custom_component manually or via HACS: add this repository as a custom repository.
After the files have been installed in HA Core, restart HA Core. After the restart, go to Configuration --> Integrations and press the "+" button. Enter "Aurum" into the search-bar, select the found Aurum-beta-component. Next, enter in the pop-up windows the IP-address of the Meetstekker and the numbers of the sensors you want to add:
Look at http://'ip-address-of-the-Aurum-unit'/measurements/output.xml to find out which sensors show actual values. Then modify the numbers during configuration: enter for instance: 16,17,18,20,23
NOTE: always use sensor 16. Also, the numbers cannot be mixed, they must be entered in ascending order.
The Aurum integration has an OPTIONS-button. It can be used to change the default data-refresh-interval (= 10 secs).