bogde / HX711

An Arduino library to interface the Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales.

bogde/HX711 Issues

2 (or more) mass calibration
Updated 2 months ago
Error on `make build-all`
Closed 3 months ago1
HX711 only reads once on startup
Updated 3 months ago2
This issue still persists.
Updated 5 months ago4
HX711 high current consumption
Updated 5 months ago
HX711 not thread safe?
Updated 7 months ago
Load cell value consistently rising and falling despite no load being applied.
Updated 9 months ago4
self-calibration of load cell
Updated 10 months ago
71
Updated a year ago
What are possible values for scale.set_scale(2280.f);
Updated a year ago2
How to check load cell is connected or not
Updated a year ago
Should function "scale.tare();" need a parameter?
Updated a year ago2
Multiple HX711 with one clock
Updated a year ago1
Reason behind using D2 and D3 pins
Closed a year ago1
warning: this use of "defined" may not be portable [-Wexpansion-to-defined]
Updated a year ago
Verify my wiring (HX711 with four strain gauges)
Updated a year ago2
add NRF to compatible boards list
Updated 2 years ago
is_ready function broken for espressif microcontrollers after #193
Updated 2 years ago5
serial monitor freezes on arduino uno when data or clock from HX711 is connected to the arduino digital data pin
Updated 2 years ago
Arduino freezes after about 1 hour of continuous reading
Updated 2 years ago
Arduino MKR 1010 Upload failure
Updated 2 years ago
Formula to find hx711 output of load cell voltage output
Updated 2 years ago1
Calibration does not work for all weights
Updated 2 years ago1
Creep effect removal. Load cell storage over long time
Updated 2 years ago5
Arduino 2 support
Updated 2 years ago
Why does my arduino reboot after placing a function "delay()"?
Updated 2 years ago
Tare the HX711 with Fish Gripper
Updated 2 years ago14
Commit c646a33 introduced a bug in pull-ups
Closed 2 years ago1
unsupported libraries
Closed 2 years ago1
using 4 load cells
Updated 2 years ago
I want to see the data read directly from the sensor on the screen?
Updated 2 years ago2
Cant handel to return more than 2²⁴-1 value
Updated 2 years ago1
Cryptic message in serial monitor
Closed 2 years ago3
Need to set clk line to LOW during setup with Adafruit Feather NRF52840
Updated 2 years ago1
Problem code with Visual studio code (HX711 use ESP32) with function map
Updated 2 years ago1
Using HX711 library on Adafruit nRF52840
Updated 2 years ago1
atomic operation is unnecessary
Updated 2 years ago
Power_down
Closed 2 years ago1
Servo twitching when using HX711
Updated 3 years ago
Can't Get Readings Faster than 450ms
Updated 3 years ago1
Measurement of the liquid level
Updated 3 years ago
Setting both HX711 channels (A+ / A- and B+ / B-) for using two load cells of 1kg in ESP32
Updated 3 years ago1
0.7.4 seems a bit broken
Updated 3 years ago2
Is there something wrong with my raw data output? And I need the raw data to be a voltage
Updated 3 years ago7
Using INB to measure excitation voltage
Updated 3 years ago1
Using HX711 for Pressure Sensor
Updated 3 years ago1
Add support for Nordic NRF52840 microcontroller
Closed 3 years ago9
No variation in output from HX711 module
Closed 3 years ago
Random outputs on multiple HX711 on HUZZAH32 (ESP32 Feather)
Closed 3 years ago1
Response time issue & readings spontaneously terminating
Updated 3 years ago1