bkloppenborg / apass

APASS Data Reduction and Processing Software

Prerequisites

The APASS data reduction has the following dependencies:

• Fortran 77 compiler (gfortran is sufficent)
• SuperMongo 2.4.7 64-bit
• X11
• SLAlib (Fortran variant)

SuperMongo

filtran requires SuperMongo 2.4.27 (or possibly newer).

Note that recent versions of C will complain about the definition of FREE in src/bison/new.h. As such, you can either replace the file:

wget -O src/bison/new.h ftp://ftp.andrew.cmu.edu/pub/AUIS/src/overhead/bison/new.h

or if that link is broken, replace the definition of FREE in src/bison/new.h with the following:

#ifdef __STDC__
#define	FREE(x)		(x ? (void) free((char *) (x)) : (void)0)
#else
#define FREE(x) 	((x) != 0 && (free ((char *) (x)), 0))
#endif

After this, configure SuperMongo

cd sm_2_4_7
set_opts    # take defaults, maybe move the install to ~/local

Edit the src/options.h file to remove the #error lines at the top of the file and add the FORTRAN_APPEND _ line. After this, verify that the configuration in the makefile make sense:

vim Makefile

Specifically, check that CC = cc -Wall -Dlinux is set. You probably don't need the swap definition on modern systems.

make
make install

After the installation step, check the external Fortran function naming convention used by your compiler. Fortran functions will either be prefixed by f, suffixed by one or two underscores. To determine the naming convention, run something similar to the following in your shell:

$ cd path_to_plotsub_install_dir

$ nm -a libplotsub_d.a | grep sm_device
0000000000000eed T sm_device
000000000000071d T sm_device__

The first command locates your library. It should be in /usr/local or whatever directory you specified in the set_opts step above. In this case the compiler used the double-underscore convention. By default the build scripts here assume the double-underscore convention. If your compiler is different, modify the
fortran/CmakeLists.txt accordingly.

SLAlib

filtran also requires the Fortran version of SLALib. Compile it however you wish. A simple CMake script to build it is as follows:

cmake_minimum_required(VERSION 2.8)
project(slalib Fortran)

file(GLOB SOURCE "*.f")

add_library(sla_f ${SOURCE})

Which should be inserted into the same directory as the .f files. After you have this, you can build as:

mkdir build
cd build
cmake ..
make

This will compile the libsla_f.a library and place it in the build directory.

Build and installation instructions

To build and install the software to /usr/local (CMake's default), simply:

cd build
cmake ..
make
sudo make install

To change the output directory of the installation, specify -DCMAKE_INSTALL_PREFIX=/path/to/installation/directory at cmake time. If you simply want to use the built binaries, look in subdirectories of build after running make (e.g. build/fortran/filtran)