Python3 interface implementation for Soundavo WS66i amplifier.
This is a 6-zone amplifier that is a direct upgrade from ws66i 6-zone amplifier. This is a fork off of pyws66i that replaces the serial protocol for telnet.
It is intended to be used with Home-Assistant.
from pyws66i import get_ws66i
# Get a connection using the IP address of the WS66i amplifier
ws66i = get_ws66i('192.168.1.123')
# Open a connection
try:
ws66i.open()
except ConnectionError:
# Handle exception
# Valid zones are 11-16 for main WS66i amplifier
zone_status = ws66i.zone_status(11)
# Print zone status
print('Zone Number = {}'.format(zone_status.zone))
print('Power is {}'.format('On' if zone_status.power else 'Off'))
print('Mute is {}'.format('On' if zone_status.mute else 'Off'))
print('Public Anouncement Mode is {}'.format('On' if zone_status.pa else 'Off'))
print('Do Not Disturb Mode is {}'.format('On' if zone_status.do_not_disturb else 'Off'))
print('Volume = {}'.format(zone_status.volume))
print('Treble = {}'.format(zone_status.treble))
print('Bass = {}'.format(zone_status.bass))
print('Balance = {}'.format(zone_status.balance))
print('Source = {}'.format(zone_status.source))
print('Keypad is {}'.format('connected' if zone_status.keypad else 'disconnected'))
# Turn off zone #11
ws66i.set_power(11, False)
# Mute zone #12
ws66i.set_mute(12, True)
# Set volume for zone #13
ws66i.set_volume(13, 15)
# Set source 1 for zone #14
ws66i.set_source(14, 1)
# Set treble for zone #15
ws66i.set_treble(15, 10)
# Set bass for zone #16
ws66i.set_bass(16, 7)
# Set balance for zone #11
ws66i.set_balance(11, 3)
# Restore zone #11 to it's original state
ws66i.restore_zone(zone_status)
# Done. Close the connection
ws66i.close()