This repository contains a UHF RFID application developed for FlipperZero, a versatile multi-tool device. The app leverages the YRM100 module to enable UHF RFID functionality.
- Read Single UHF RFID tag.
- View saved UHF RFID tag. (in progress)
- Write Single UHF RFID tag.
- Communicate with the YRM100 module to perform UHF RFID operations.
- Easy-to-use interface on FlipperZero's display.
- Extras
- Read multiple tags at once
- View multiple on a list view
- Extras
To run this application on FlipperZero, you will need:
- FlipperZero device (purchase from Flipper Devices)
- YRM100 UHF RFID module (purchase from Ali-Express)
- Ensure you have set up your FlipperZero device with the YRM100 module properly. You can also read more about how to setup the module from the Md5Stack Docs page.
- Clone this repository to the
applications_user
folder of your flipper firmware of your choice - If you have VSCode setup with your flipper firmware.
-
- Press
Ctrl+Shift+B
on vscode while in the uhf_app folder - Select the
Launch App on Flipper
option. And watch as the app launches on your flipper
- If you don't have vscode setup you can use the cli command
./fbt COMPACT=1 DEBUG=0 launch APPSRC=applications_user\uhf_rfid
- Press
- ... tbd
-
- Power on your FlipperZero device.
- Connect the uhf module to the flipper via gpio.
- Navigate to the UHF RFID app on FlipperZero's menu.
- Currently Reading the EPC tag is the only usable option ... will further update this page as it development goes
As this app is still in the development stage, I welcome contributions to this project. If you find any issues or want to enhance the application, feel free to create a pull request.
- This application is provided as-is and may contain bugs or issues.
- Use it at your own risk.
- I am not responsible for any damage or loss caused by the usage of this app.
For any inquiries or support, you can reach out to us at :
- Personal Email : frux.infoc@gmail.com
- Discord Server: Flipper Zero Tutorial-Unoffical by @jamisonderek
- Discord User: frux.c