betaflight / bidircfg

betaflight/bidircfg Issues

problems with mamba f722 mini (packet loss and no current sensing)
Closed 5 years ago13
<to be removed>
Closed 4 years ago
Matek F411: BF 4.1 DShot BitBang not working when assigning Pin A08 (LED) to cam control
Closed 5 years ago19
RPM filter motor grinding
Closed 5 years ago26
Smart audio broke, on Matek f722mini, with bidir DShot
Closed 5 years ago2
CLRacing F7 motors 3 & 4 not spinning with RPM filtering
Closed 5 years ago4
Bidirectional Dshot Piro F4 doesn't work with LED's enabled
Closed 5 years ago3
LED Conflict RPM filter
Closed 5 years ago11
Add MATEKF411RX to Bidirectional DSHOT and RPM Filter supported target
Closed 5 years ago4
Mamba F7 Bi-dir not working
Closed 5 years ago3
JESC RPM Filter
Closed 5 years ago
Mamba F722 Mini RMP Filtering Not Working ... Only 2 Motors Spin Up
Closed 5 years ago12
Talon F7 V2 no bidirectional DSHOT possible
Closed 5 years ago10
Bidirectional DSHOT: KAKUTEF7 & Tekko32 Dshot invalid pkts at 90-100% but osd shows esc RPM
Closed 5 years ago8
Missing target config file for rpm filter for clracingf7
Closed 5 years ago2
CLRACINGF7 does not boot with 4.1.0 #1577 and bidircfg/.../DEFAULT.cf settings
Closed 5 years ago4
rpmfilter: one motor output not working on SPEEDYBEEF4 (SBF4)
Closed 5 years ago5
Need to set resource beeper none for rpm filter to work on CLRACINGF4
Closed 5 years ago5
Softserial + smartport preventing arming/motor test with RPM filter
Closed 5 years ago4
When setting motor_pwm_protocol to dshot600, Gyro light goes off and Sonar light turns on
Closed 5 years ago6
Continuous problem # 7754
Closed 5 years ago2
BF 4.0 RC2 - DALRC F405 motors 1 and 2 not spinning (Dshot Bidir)
Closed 5 years ago11
CLRACINGF4 (Bardwell board) RPM Filter, only motor 2 and 3 will spin
Closed 5 years ago3
DALRC F405 upgrade snippet is missing dma setting for pin C06
Closed 5 years ago2
BF 4.0 RC6 Kakute f4v2 Motor 3 not spinning
Closed 5 years ago2
BF 4.0 - CLRacing F4 motors 1 and 2 not spinning (Dshot Bidir)
Closed 5 years ago34
Rpm readings are off
Closed 5 years ago2
FC frozen after add timer b00 1 timer b01 1
Closed 5 years ago7
OMNIBUS F7 V2 Not working
Closed 5 years ago1
esc pass-through and general esc problems with latest 4.1
Closed 5 years ago3
MATEKF722 - ESC's don't arm since build 1613
Closed 5 years ago2
Issue with bidirectional dshot (motors unresponsive)
Closed 5 years ago7
Problem CL Racing F7
Closed 5 years ago
BF4 RC5, OminbusF4V6, remapped motors, 2 motors not working when dshot_bidi = ON
Closed 5 years ago4