Portage of Oberon system to stm32f429i-disco board
Version 2 released!
Improved SD card write reliability
Improved VGA signals
Improved keyboard support
PS/2, RTC, nRF24L01+ (CRC + SPI) drivers ported from C to Oberon
Minor bugs correction
Changes in oberon 07 compiler:
Registers usage control in procedures
Cortex M4 microcontrollers save automatically a set of registers on stack when servicing an interruption.
If an Oberon exception handler contains too complicated expressions, there is a risk that a non saved register is used.
To prevent that case to happen, I introduced a new notation ^n after the PROCEDURE keyword:
PROCEDURE^3 handler;
BEGIN ....
END handler;
With this information, the compiler can check that no more than n register are used. The save/restoration instructions are automatically generated according to the declared number of used registers.
Unsafe local variables marking
This Oberon compiler allow allocation of unitialized pointers on stack.
Those pointers are not checked at runtime, so they are not safe until they are properly intialized.
I made a change in the compiler to allow detection of the declaration of local variables containing pointers. The developer must check the code to be sure that no bad use is made with these variables.
For example, assume that a Files.Rider is declared as a local variable. Using of the "file" member (eg. via Files.Base) is unsafe until the rider has been initialized with Files.Set.
When the developer has determined that the code usage of the local variable is safe, he or she must mark the variable with an exclamation mark (!) in its declaration.
Oberon runs now on the STM32F429I-DISCO base board:
Hardware side:
