Beast code in Giters

Bernd Giesecke's repositories

SX126x-Arduino

Arduino library to use Semtech SX126x LoRa chips and modules to communicate

Language:C++MIT228 18 108

SX1262-SC-GW

Single channel LoRaWan gateway for ESP8266/ESP32 using Semtech SX1262 LoRa module

Language:C++MIT19 4 3

WisBlock API V2 for RAK4631 takes care of all the LoRaWAN, BLE, AT command functionality. It makes development of event driven power savings applications easy. RUI3 AT command compatible allows the usage of RAKwireless' WisToolBox to setup the device.

Language:C++MIT12 3 3

Meshtastic-Sensor-Network

Setup a sensor network using Meshtastic mesh network and MQTT broker

Language:JavaScriptMIT1000

nRF52_OLED

An I2C/SPI display driver for SSD1306/SH1106 oled displays connected to an nRF52

Language:CNOASSERTION9 20

WisBlock-Sensor-For-LoRaWAN

Firmware for RAKwireless WisBlock RAK4631 Core module.

Language:C9 4 1

RUI3-LowPower-Example

Example how to achieve lowest power consumption with a custom firmware created with RUI3

Language:C++MIT6 4 2

WisBlock-Seismic-Sensor

Example for WisBlock RAK12027 Seismic Sensor based on the Omron D7S. This repo includes the code for RAK4631 based on Arduino and the RAK4631-R and RAK3172 based on RAK's RUI3

Language:C++MIT6 30

WisBlock-Toolbox

Compagnion to the WisBlock API which supports the OTA DFU firmware update and the LoRa® / LoRaWAN® configuration over BLE.

Language:JavaUnlicense4 30

RUI3-Signal-Meter-P2P-LPWAN-UI

This is a PoC of a very basic signal tester. It works in both LoRa P2P and LoRaWAN mode. It uses a simple OLED display and a simple one-button controlled UI for settings changes.

Language:C++MIT3 10

RAK4631-Kit-2-RAK1910-RAK1904-RAK1906

Example code for WisBlock GNSS tracker with RAK1910 GNSS module, RAK1904 acceleration sensor and RAK1906 Environment sensor (optional, not included in Kit 2)

Language:C++2 4 1

RAK4631-Kit-4-RAK1906

Example code for WisBlock Environment Sensor with RAK1906 environment sensor

Language:C++Unlicense2 30

Blues-Minimal-I2C

This library covers the communication between a RAKwireless WisCore module and a Blues.IO Notecard over I2C.

Language:C++MIT1 20

ClusterDuck-Protocol

Firmware for an ad-hoc mesh network of Internet-of-Things devices based on LoRa (Long Range radio) that can be deployed quickly and at low cost.

Language:C++Apache-2.01 10

Hydroponic-Control-System

A hydroponic control system built with RAKwireless WisBlock modules

Language:C++MIT1 30

LoRa-P2P-Gateway

LoRa P2P gateway to MQTT broker or HTTP POST service

Language:C++MIT100

PicoSoftwareSerial

Quick 'n' dirty PIO based implementation of SoftwareSerial for an RP2040 based board

Language:C++MIT1 20

RAK11200-SMA-Sunnyboy

WisBlock application to read production data from a SMA Sunnyboy Solar Inverter

Language:C++MIT1 20

RAK4631-RAK14014-Demo

Simple demo for the RAK14014 TFT display

Language:CMIT1 30

RUI3-Signal-Meter-P2P-LPWAN

PoC of a very basic signal tester. It works in both LoRa P2P and LoRaWAN mode.

Language:C++MIT1 20

Blues-WisBlock-Tracker

A LoRaWAN + Cellular connected location tracker using WisBlock and the Blues.IO NoteCard

Language:C++MIT020

enclosures

Enclosures for Meshtastic devices

000

firmware

Meshtastic device firmware fork

Language:C++GPL-3.0000

library-registry

Arduino Library Manager list

CC0-1.0010

Low-Power-PIO

A simple example code how to build a low-power device based on WisBlock modules with the WisBlock-API-V2

Language:C++MIT020

RAK-OneWireSerial

This library provides functions to communicate over a one wire serial interface with slave modules This protocol is used by RAK2560 SensorHub

Language:CMIT010

RAK13015

This library is the interface to the different interfaces provides by the RAK13015 module. It supports the three 4-20mA interfaces, the two 0-30V analog interfaces and the RS485 interface.

Language:C++MIT010

RAKwireless_RAK14000_EPD_2_13

RAKWireless library for the RAK14000 EPD module

Language:C++MIT020

RUI3-Arduino-Library

RAKWireless library for communication over UART with RUI3 based WisDuo modules.

Language:C++MIT01 2

WisBlock-HW-Tester

Test application to do a basic hardware test with WisBlock Base Boards, WisBlock Core RAK4631 and WisBlock modules and displays.

Language:C++MIT000