SNAP is an arduino-compatible audio datalogger board (designed for Teensy 3.x)
More information is at http://loggerhead.com
Files:
- snap: Main control and sensor recording
- cmd.pde: Reads recording settings from a script file
- wav.h: wav header
- rms: rms calculation
Software supports:
- duty cycle recording
- display
- button input for recording setup
- writing to microSD
- Install Teensyduino from https://www.pjrc.com/teensy/loader.html
- Get latest hex file from appropriate repository https://github.com/loggerhead-instruments/snap/tree/master/hex To download the file, left-click on the file name, and then right click on the Raw button and select Save As link.
- Connect microUSB cable to small board on device. You may have to unscrew board.
- Run the Teensy Loader program.
- From File Menu, select Open HEX File
- Press the button on the board, or from Operation menu, select Program (you may have to turn off automatic mode).
To check whether the firmware has been updated, collect some data, and check the log files for the version date of the firmware.