RP2040-Zero ADXL345 Connection Klipper
Connect your ADXL345 to your host Raspberry Pi via a RP2040-Zero
My mounting solution for the Sovol SV06
I use this on my Sovol SV06. I highly recommend using short cables.
Diagram
Config
[mcu RP2040]
baud: 115200
restart_method: command
# Obtain definition by "ls -l /dev/serial/by-id/"
serial: /dev/serial/by-id/usb-Klipper_rp2040_E66138935F154C28-if00
[adxl345]
cs_pin: RP2040:gpio1
spi_bus: spi0a
Support Me
If you found my work useful, please consider buying me a .