baruch / b3603

Alternative firmware for the B3603

baruch/b3603 Issues

You might want to have a look at my different approach.
Updated 3 years ago
Has anyone tried what the serial connection on the control board does?
Updated 4 years ago2
Any update on this project ?
Updated 6 years ago1
Only one 7-segment display working
Updated 7 years ago4
Manual - How to program STM8
Closed 7 years ago1
Use the buttons
Updated 7 years ago4
Cannot control voltage, current, output state
Closed 7 years ago1
Board not responding to serial commands
Closed 7 years ago5
Code is too large to fit STM8
Closed 7 years ago6
Alert when the unit is fed below 6V
Updated 9 years ago2
Implement calibration
Closed 10 years ago3
UART can't handle high speeds
Closed 10 years ago
When driving a current limited load CC led is not turned on
Closed 10 years ago
Save settings to EEPROM
Closed 10 years ago
Set the OPT2 AFR0 bit from the code
Closed 10 years ago
Implement a watchdog
Closed 10 years ago
Handle case of top board inserted in reverse
Updated 10 years ago
Limit number of updates to the 7-segment display
Closed 10 years ago
Output glitch at startup
Closed 10 years ago3
How are the 74HC595 wired?
Closed 10 years ago2
How are the leds wired?
Closed 10 years ago3