PostgreSQL (Postgres) is an open source object-relational database known for reliability and data integrity. ACID-compliant, it supports foreign keys, joins, views, triggers and stored procedures.
Trademarks: This software listing is packaged by Bitnami. The respective trademarks mentioned in the offering are owned by the respective companies, and use of them does not imply any affiliation or endorsement.
helm repo add bitnami https://charts.bitnami.com/bitnami
helm install my-release bitnami/postgresql
This chart bootstraps a PostgreSQL deployment on a Kubernetes cluster using the Helm package manager.
For HA, please see this repo
Bitnami charts can be used with Kubeapps for deployment and management of Helm Charts in clusters.
- Kubernetes 1.19+
- Helm 3.2.0+
- PV provisioner support in the underlying infrastructure
To install the chart with the release name my-release
:
helm install my-release bitnami/postgresql
The command deploys PostgreSQL on the Kubernetes cluster in the default configuration. The Parameters section lists the parameters that can be configured during installation.
Tip: List all releases using
helm list
To uninstall/delete the my-release
deployment:
helm delete my-release
The command removes all the Kubernetes components but PVC's associated with the chart and deletes the release.
To delete the PVC's associated with my-release
:
kubectl delete pvc -l release=my-release
Note: Deleting the PVC's will delete postgresql data as well. Please be cautious before doing it.
Name | Description | Value |
---|---|---|
global.imageRegistry |
Global Docker image registry | "" |
global.imagePullSecrets |
Global Docker registry secret names as an array | [] |
global.storageClass |
Global StorageClass for Persistent Volume(s) | "" |
global.postgresql.auth.postgresPassword |
Password for the "postgres" admin user (overrides auth.postgresPassword ) |
"" |
global.postgresql.auth.username |
Name for a custom user to create (overrides auth.username ) |
"" |
global.postgresql.auth.password |
Password for the custom user to create (overrides auth.password ) |
"" |
global.postgresql.auth.database |
Name for a custom database to create (overrides auth.database ) |
"" |
global.postgresql.auth.existingSecret |
Name of existing secret to use for PostgreSQL credentials (overrides auth.existingSecret ). |
"" |
global.postgresql.auth.secretKeys.adminPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials (overrides auth.secretKeys.adminPasswordKey ). Only used when global.postgresql.auth.existingSecret is set. |
"" |
global.postgresql.auth.secretKeys.userPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials (overrides auth.secretKeys.userPasswordKey ). Only used when global.postgresql.auth.existingSecret is set. |
"" |
global.postgresql.auth.secretKeys.replicationPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials (overrides auth.secretKeys.replicationPasswordKey ). Only used when global.postgresql.auth.existingSecret is set. |
"" |
global.postgresql.service.ports.postgresql |
PostgreSQL service port (overrides service.ports.postgresql ) |
"" |
Name | Description | Value |
---|---|---|
kubeVersion |
Override Kubernetes version | "" |
nameOverride |
String to partially override common.names.fullname template (will maintain the release name) | "" |
fullnameOverride |
String to fully override common.names.fullname template | "" |
clusterDomain |
Kubernetes Cluster Domain | cluster.local |
extraDeploy |
Array of extra objects to deploy with the release (evaluated as a template) | [] |
commonLabels |
Add labels to all the deployed resources | {} |
commonAnnotations |
Add annotations to all the deployed resources | {} |
diagnosticMode.enabled |
Enable diagnostic mode (all probes will be disabled and the command will be overridden) | false |
diagnosticMode.command |
Command to override all containers in the statefulset | ["sleep"] |
diagnosticMode.args |
Args to override all containers in the statefulset | ["infinity"] |
Name | Description | Value |
---|---|---|
image.registry |
PostgreSQL image registry | docker.io |
image.repository |
PostgreSQL image repository | bitnami/postgresql |
image.tag |
PostgreSQL image tag (immutable tags are recommended) | 14.5.0-debian-11-r14 |
image.digest |
PostgreSQL image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag | "" |
image.pullPolicy |
PostgreSQL image pull policy | IfNotPresent |
image.pullSecrets |
Specify image pull secrets | [] |
image.debug |
Specify if debug values should be set | false |
auth.enablePostgresUser |
Assign a password to the "postgres" admin user. Otherwise, remote access will be blocked for this user | true |
auth.postgresPassword |
Password for the "postgres" admin user. Ignored if auth.existingSecret with key postgres-password is provided |
"" |
auth.username |
Name for a custom user to create | "" |
auth.password |
Password for the custom user to create. Ignored if auth.existingSecret with key password is provided |
"" |
auth.database |
Name for a custom database to create | "" |
auth.replicationUsername |
Name of the replication user | repl_user |
auth.replicationPassword |
Password for the replication user. Ignored if auth.existingSecret with key replication-password is provided |
"" |
auth.existingSecret |
Name of existing secret to use for PostgreSQL credentials. auth.postgresPassword , auth.password , and auth.replicationPassword will be ignored and picked up from this secret. The secret might also contains the key ldap-password if LDAP is enabled. ldap.bind_password will be ignored and picked from this secret in this case. |
"" |
auth.secretKeys.adminPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set. |
postgres-password |
auth.secretKeys.userPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set. |
password |
auth.secretKeys.replicationPasswordKey |
Name of key in existing secret to use for PostgreSQL credentials. Only used when auth.existingSecret is set. |
replication-password |
auth.usePasswordFiles |
Mount credentials as a files instead of using an environment variable | false |
architecture |
PostgreSQL architecture (standalone or replication ) |
standalone |
replication.synchronousCommit |
Set synchronous commit mode. Allowed values: on , remote_apply , remote_write , local and off |
off |
replication.numSynchronousReplicas |
Number of replicas that will have synchronous replication. Note: Cannot be greater than readReplicas.replicaCount . |
0 |
replication.applicationName |
Cluster application name. Useful for advanced replication settings | my_application |
containerPorts.postgresql |
PostgreSQL container port | 5432 |
audit.logHostname |
Log client hostnames | false |
audit.logConnections |
Add client log-in operations to the log file | false |
audit.logDisconnections |
Add client log-outs operations to the log file | false |
audit.pgAuditLog |
Add operations to log using the pgAudit extension | "" |
audit.pgAuditLogCatalog |
Log catalog using pgAudit | off |
audit.clientMinMessages |
Message log level to share with the user | error |
audit.logLinePrefix |
Template for log line prefix (default if not set) | "" |
audit.logTimezone |
Timezone for the log timestamps | "" |
ldap.enabled |
Enable LDAP support | false |
ldap.server |
IP address or name of the LDAP server. | "" |
ldap.port |
Port number on the LDAP server to connect to | "" |
ldap.prefix |
String to prepend to the user name when forming the DN to bind | "" |
ldap.suffix |
String to append to the user name when forming the DN to bind | "" |
ldap.basedn |
Root DN to begin the search for the user in | "" |
ldap.binddn |
DN of user to bind to LDAP | "" |
ldap.bindpw |
Password for the user to bind to LDAP | "" |
ldap.searchAttribute |
Attribute to match against the user name in the search | "" |
ldap.searchFilter |
The search filter to use when doing search+bind authentication | "" |
ldap.scheme |
Set to ldaps to use LDAPS |
"" |
ldap.tls.enabled |
Se to true to enable TLS encryption | false |
ldap.uri |
LDAP URL beginning in the form ldap[s]://host[:port]/basedn . If provided, all the other LDAP parameters will be ignored. |
"" |
postgresqlDataDir |
PostgreSQL data dir folder | /bitnami/postgresql/data |
postgresqlSharedPreloadLibraries |
Shared preload libraries (comma-separated list) | pgaudit |
shmVolume.enabled |
Enable emptyDir volume for /dev/shm for PostgreSQL pod(s) | true |
shmVolume.sizeLimit |
Set this to enable a size limit on the shm tmpfs | "" |
tls.enabled |
Enable TLS traffic support | false |
tls.autoGenerated |
Generate automatically self-signed TLS certificates | false |
tls.preferServerCiphers |
Whether to use the server's TLS cipher preferences rather than the client's | true |
tls.certificatesSecret |
Name of an existing secret that contains the certificates | "" |
tls.certFilename |
Certificate filename | "" |
tls.certKeyFilename |
Certificate key filename | "" |
tls.certCAFilename |
CA Certificate filename | "" |
tls.crlFilename |
File containing a Certificate Revocation List | "" |
Name | Description | Value |
---|---|---|
primary.name |
Name of the primary database (eg primary, master, leader, ...) | primary |
primary.configuration |
PostgreSQL Primary main configuration to be injected as ConfigMap | "" |
primary.pgHbaConfiguration |
PostgreSQL Primary client authentication configuration | "" |
primary.existingConfigmap |
Name of an existing ConfigMap with PostgreSQL Primary configuration | "" |
primary.extendedConfiguration |
Extended PostgreSQL Primary configuration (appended to main or default configuration) | "" |
primary.existingExtendedConfigmap |
Name of an existing ConfigMap with PostgreSQL Primary extended configuration | "" |
primary.initdb.args |
PostgreSQL initdb extra arguments | "" |
primary.initdb.postgresqlWalDir |
Specify a custom location for the PostgreSQL transaction log | "" |
primary.initdb.scripts |
Dictionary of initdb scripts | {} |
primary.initdb.scriptsConfigMap |
ConfigMap with scripts to be run at first boot | "" |
primary.initdb.scriptsSecret |
Secret with scripts to be run at first boot (in case it contains sensitive information) | "" |
primary.initdb.user |
Specify the PostgreSQL username to execute the initdb scripts | "" |
primary.initdb.password |
Specify the PostgreSQL password to execute the initdb scripts | "" |
primary.standby.enabled |
Whether to enable current cluster's primary as standby server of another cluster or not | false |
primary.standby.primaryHost |
The Host of replication primary in the other cluster | "" |
primary.standby.primaryPort |
The Port of replication primary in the other cluster | "" |
primary.extraEnvVars |
Array with extra environment variables to add to PostgreSQL Primary nodes | [] |
primary.extraEnvVarsCM |
Name of existing ConfigMap containing extra env vars for PostgreSQL Primary nodes | "" |
primary.extraEnvVarsSecret |
Name of existing Secret containing extra env vars for PostgreSQL Primary nodes | "" |
primary.command |
Override default container command (useful when using custom images) | [] |
primary.args |
Override default container args (useful when using custom images) | [] |
primary.livenessProbe.enabled |
Enable livenessProbe on PostgreSQL Primary containers | true |
primary.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 30 |
primary.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
primary.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
primary.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 6 |
primary.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
primary.readinessProbe.enabled |
Enable readinessProbe on PostgreSQL Primary containers | true |
primary.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 5 |
primary.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
primary.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
primary.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 6 |
primary.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
primary.startupProbe.enabled |
Enable startupProbe on PostgreSQL Primary containers | false |
primary.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 30 |
primary.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
primary.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
primary.startupProbe.failureThreshold |
Failure threshold for startupProbe | 15 |
primary.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
primary.customLivenessProbe |
Custom livenessProbe that overrides the default one | {} |
primary.customReadinessProbe |
Custom readinessProbe that overrides the default one | {} |
primary.customStartupProbe |
Custom startupProbe that overrides the default one | {} |
primary.lifecycleHooks |
for the PostgreSQL Primary container to automate configuration before or after startup | {} |
primary.resources.limits |
The resources limits for the PostgreSQL Primary containers | {} |
primary.resources.requests.memory |
The requested memory for the PostgreSQL Primary containers | 256Mi |
primary.resources.requests.cpu |
The requested cpu for the PostgreSQL Primary containers | 250m |
primary.podSecurityContext.enabled |
Enable security context | true |
primary.podSecurityContext.fsGroup |
Group ID for the pod | 1001 |
primary.containerSecurityContext.enabled |
Enable container security context | true |
primary.containerSecurityContext.runAsUser |
User ID for the container | 1001 |
primary.hostAliases |
PostgreSQL primary pods host aliases | [] |
primary.hostNetwork |
Specify if host network should be enabled for PostgreSQL pod (postgresql primary) | false |
primary.hostIPC |
Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary) | false |
primary.labels |
Map of labels to add to the statefulset (postgresql primary) | {} |
primary.annotations |
Annotations for PostgreSQL primary pods | {} |
primary.podLabels |
Map of labels to add to the pods (postgresql primary) | {} |
primary.podAnnotations |
Map of annotations to add to the pods (postgresql primary) | {} |
primary.podAffinityPreset |
PostgreSQL primary pod affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard |
"" |
primary.podAntiAffinityPreset |
PostgreSQL primary pod anti-affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard |
soft |
primary.nodeAffinityPreset.type |
PostgreSQL primary node affinity preset type. Ignored if primary.affinity is set. Allowed values: soft or hard |
"" |
primary.nodeAffinityPreset.key |
PostgreSQL primary node label key to match Ignored if primary.affinity is set. |
"" |
primary.nodeAffinityPreset.values |
PostgreSQL primary node label values to match. Ignored if primary.affinity is set. |
[] |
primary.affinity |
Affinity for PostgreSQL primary pods assignment | {} |
primary.nodeSelector |
Node labels for PostgreSQL primary pods assignment | {} |
primary.tolerations |
Tolerations for PostgreSQL primary pods assignment | [] |
primary.topologySpreadConstraints |
Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template | [] |
primary.priorityClassName |
Priority Class to use for each pod (postgresql primary) | "" |
primary.schedulerName |
Use an alternate scheduler, e.g. "stork". | "" |
primary.terminationGracePeriodSeconds |
Seconds PostgreSQL primary pod needs to terminate gracefully | "" |
primary.updateStrategy.type |
PostgreSQL Primary statefulset strategy type | RollingUpdate |
primary.updateStrategy.rollingUpdate |
PostgreSQL Primary statefulset rolling update configuration parameters | {} |
primary.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the PostgreSQL Primary container(s) | [] |
primary.extraVolumes |
Optionally specify extra list of additional volumes for the PostgreSQL Primary pod(s) | [] |
primary.sidecars |
Add additional sidecar containers to the PostgreSQL Primary pod(s) | [] |
primary.initContainers |
Add additional init containers to the PostgreSQL Primary pod(s) | [] |
primary.extraPodSpec |
Optionally specify extra PodSpec for the PostgreSQL Primary pod(s) | {} |
primary.service.type |
Kubernetes Service type | ClusterIP |
primary.service.ports.postgresql |
PostgreSQL service port | 5432 |
primary.service.nodePorts.postgresql |
Node port for PostgreSQL | "" |
primary.service.clusterIP |
Static clusterIP or None for headless services | "" |
primary.service.annotations |
Annotations for PostgreSQL primary service | {} |
primary.service.loadBalancerIP |
Load balancer IP if service type is LoadBalancer |
"" |
primary.service.externalTrafficPolicy |
Enable client source IP preservation | Cluster |
primary.service.loadBalancerSourceRanges |
Addresses that are allowed when service is LoadBalancer | [] |
primary.service.extraPorts |
Extra ports to expose in the PostgreSQL primary service | [] |
primary.service.sessionAffinity |
Session Affinity for Kubernetes service, can be "None" or "ClientIP" | None |
primary.service.sessionAffinityConfig |
Additional settings for the sessionAffinity | {} |
primary.persistence.enabled |
Enable PostgreSQL Primary data persistence using PVC | true |
primary.persistence.existingClaim |
Name of an existing PVC to use | "" |
primary.persistence.mountPath |
The path the volume will be mounted at | /bitnami/postgresql |
primary.persistence.subPath |
The subdirectory of the volume to mount to | "" |
primary.persistence.storageClass |
PVC Storage Class for PostgreSQL Primary data volume | "" |
primary.persistence.accessModes |
PVC Access Mode for PostgreSQL volume | ["ReadWriteOnce"] |
primary.persistence.size |
PVC Storage Request for PostgreSQL volume | 8Gi |
primary.persistence.annotations |
Annotations for the PVC | {} |
primary.persistence.labels |
Labels for the PVC | {} |
primary.persistence.selector |
Selector to match an existing Persistent Volume (this value is evaluated as a template) | {} |
primary.persistence.dataSource |
Custom PVC data source | {} |
Name | Description | Value |
---|---|---|
readReplicas.name |
Name of the read replicas database (eg secondary, slave, ...) | read |
readReplicas.replicaCount |
Number of PostgreSQL read only replicas | 1 |
readReplicas.extendedConfiguration |
Extended PostgreSQL read only replicas configuration (appended to main or default configuration) | "" |
readReplicas.extraEnvVars |
Array with extra environment variables to add to PostgreSQL read only nodes | [] |
readReplicas.extraEnvVarsCM |
Name of existing ConfigMap containing extra env vars for PostgreSQL read only nodes | "" |
readReplicas.extraEnvVarsSecret |
Name of existing Secret containing extra env vars for PostgreSQL read only nodes | "" |
readReplicas.command |
Override default container command (useful when using custom images) | [] |
readReplicas.args |
Override default container args (useful when using custom images) | [] |
readReplicas.livenessProbe.enabled |
Enable livenessProbe on PostgreSQL read only containers | true |
readReplicas.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 30 |
readReplicas.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
readReplicas.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
readReplicas.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 6 |
readReplicas.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
readReplicas.readinessProbe.enabled |
Enable readinessProbe on PostgreSQL read only containers | true |
readReplicas.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 5 |
readReplicas.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
readReplicas.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
readReplicas.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 6 |
readReplicas.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
readReplicas.startupProbe.enabled |
Enable startupProbe on PostgreSQL read only containers | false |
readReplicas.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 30 |
readReplicas.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
readReplicas.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
readReplicas.startupProbe.failureThreshold |
Failure threshold for startupProbe | 15 |
readReplicas.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
readReplicas.customLivenessProbe |
Custom livenessProbe that overrides the default one | {} |
readReplicas.customReadinessProbe |
Custom readinessProbe that overrides the default one | {} |
readReplicas.customStartupProbe |
Custom startupProbe that overrides the default one | {} |
readReplicas.lifecycleHooks |
for the PostgreSQL read only container to automate configuration before or after startup | {} |
readReplicas.resources.limits |
The resources limits for the PostgreSQL read only containers | {} |
readReplicas.resources.requests.memory |
The requested memory for the PostgreSQL read only containers | 256Mi |
readReplicas.resources.requests.cpu |
The requested cpu for the PostgreSQL read only containers | 250m |
readReplicas.podSecurityContext.enabled |
Enable security context | true |
readReplicas.podSecurityContext.fsGroup |
Group ID for the pod | 1001 |
readReplicas.containerSecurityContext.enabled |
Enable container security context | true |
readReplicas.containerSecurityContext.runAsUser |
User ID for the container | 1001 |
readReplicas.hostAliases |
PostgreSQL read only pods host aliases | [] |
readReplicas.hostNetwork |
Specify if host network should be enabled for PostgreSQL pod (PostgreSQL read only) | false |
readReplicas.hostIPC |
Specify if host IPC should be enabled for PostgreSQL pod (postgresql primary) | false |
readReplicas.labels |
Map of labels to add to the statefulset (PostgreSQL read only) | {} |
readReplicas.annotations |
Annotations for PostgreSQL read only pods | {} |
readReplicas.podLabels |
Map of labels to add to the pods (PostgreSQL read only) | {} |
readReplicas.podAnnotations |
Map of annotations to add to the pods (PostgreSQL read only) | {} |
readReplicas.podAffinityPreset |
PostgreSQL read only pod affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard |
"" |
readReplicas.podAntiAffinityPreset |
PostgreSQL read only pod anti-affinity preset. Ignored if primary.affinity is set. Allowed values: soft or hard |
soft |
readReplicas.nodeAffinityPreset.type |
PostgreSQL read only node affinity preset type. Ignored if primary.affinity is set. Allowed values: soft or hard |
"" |
readReplicas.nodeAffinityPreset.key |
PostgreSQL read only node label key to match Ignored if primary.affinity is set. |
"" |
readReplicas.nodeAffinityPreset.values |
PostgreSQL read only node label values to match. Ignored if primary.affinity is set. |
[] |
readReplicas.affinity |
Affinity for PostgreSQL read only pods assignment | {} |
readReplicas.nodeSelector |
Node labels for PostgreSQL read only pods assignment | {} |
readReplicas.tolerations |
Tolerations for PostgreSQL read only pods assignment | [] |
readReplicas.topologySpreadConstraints |
Topology Spread Constraints for pod assignment spread across your cluster among failure-domains. Evaluated as a template | [] |
readReplicas.priorityClassName |
Priority Class to use for each pod (PostgreSQL read only) | "" |
readReplicas.schedulerName |
Use an alternate scheduler, e.g. "stork". | "" |
readReplicas.terminationGracePeriodSeconds |
Seconds PostgreSQL read only pod needs to terminate gracefully | "" |
readReplicas.updateStrategy.type |
PostgreSQL read only statefulset strategy type | RollingUpdate |
readReplicas.updateStrategy.rollingUpdate |
PostgreSQL read only statefulset rolling update configuration parameters | {} |
readReplicas.extraVolumeMounts |
Optionally specify extra list of additional volumeMounts for the PostgreSQL read only container(s) | [] |
readReplicas.extraVolumes |
Optionally specify extra list of additional volumes for the PostgreSQL read only pod(s) | [] |
readReplicas.sidecars |
Add additional sidecar containers to the PostgreSQL read only pod(s) | [] |
readReplicas.initContainers |
Add additional init containers to the PostgreSQL read only pod(s) | [] |
readReplicas.extraPodSpec |
Optionally specify extra PodSpec for the PostgreSQL read only pod(s) | {} |
readReplicas.service.type |
Kubernetes Service type | ClusterIP |
readReplicas.service.ports.postgresql |
PostgreSQL service port | 5432 |
readReplicas.service.nodePorts.postgresql |
Node port for PostgreSQL | "" |
readReplicas.service.clusterIP |
Static clusterIP or None for headless services | "" |
readReplicas.service.annotations |
Annotations for PostgreSQL read only service | {} |
readReplicas.service.loadBalancerIP |
Load balancer IP if service type is LoadBalancer |
"" |
readReplicas.service.externalTrafficPolicy |
Enable client source IP preservation | Cluster |
readReplicas.service.loadBalancerSourceRanges |
Addresses that are allowed when service is LoadBalancer | [] |
readReplicas.service.extraPorts |
Extra ports to expose in the PostgreSQL read only service | [] |
readReplicas.service.sessionAffinity |
Session Affinity for Kubernetes service, can be "None" or "ClientIP" | None |
readReplicas.service.sessionAffinityConfig |
Additional settings for the sessionAffinity | {} |
readReplicas.persistence.enabled |
Enable PostgreSQL read only data persistence using PVC | true |
readReplicas.persistence.existingClaim |
Name of an existing PVC to use | "" |
readReplicas.persistence.mountPath |
The path the volume will be mounted at | /bitnami/postgresql |
readReplicas.persistence.subPath |
The subdirectory of the volume to mount to | "" |
readReplicas.persistence.storageClass |
PVC Storage Class for PostgreSQL read only data volume | "" |
readReplicas.persistence.accessModes |
PVC Access Mode for PostgreSQL volume | ["ReadWriteOnce"] |
readReplicas.persistence.size |
PVC Storage Request for PostgreSQL volume | 8Gi |
readReplicas.persistence.annotations |
Annotations for the PVC | {} |
readReplicas.persistence.labels |
Labels for the PVC | {} |
readReplicas.persistence.selector |
Selector to match an existing Persistent Volume (this value is evaluated as a template) | {} |
readReplicas.persistence.dataSource |
Custom PVC data source | {} |
Name | Description | Value |
---|---|---|
networkPolicy.enabled |
Enable network policies | false |
networkPolicy.metrics.enabled |
Enable network policies for metrics (prometheus) | false |
networkPolicy.metrics.namespaceSelector |
Monitoring namespace selector labels. These labels will be used to identify the prometheus' namespace. | {} |
networkPolicy.metrics.podSelector |
Monitoring pod selector labels. These labels will be used to identify the Prometheus pods. | {} |
networkPolicy.ingressRules.primaryAccessOnlyFrom.enabled |
Enable ingress rule that makes PostgreSQL primary node only accessible from a particular origin. | false |
networkPolicy.ingressRules.primaryAccessOnlyFrom.namespaceSelector |
Namespace selector label that is allowed to access the PostgreSQL primary node. This label will be used to identified the allowed namespace(s). | {} |
networkPolicy.ingressRules.primaryAccessOnlyFrom.podSelector |
Pods selector label that is allowed to access the PostgreSQL primary node. This label will be used to identified the allowed pod(s). | {} |
networkPolicy.ingressRules.primaryAccessOnlyFrom.customRules |
Custom network policy for the PostgreSQL primary node. | {} |
networkPolicy.ingressRules.readReplicasAccessOnlyFrom.enabled |
Enable ingress rule that makes PostgreSQL read-only nodes only accessible from a particular origin. | false |
networkPolicy.ingressRules.readReplicasAccessOnlyFrom.namespaceSelector |
Namespace selector label that is allowed to access the PostgreSQL read-only nodes. This label will be used to identified the allowed namespace(s). | {} |
networkPolicy.ingressRules.readReplicasAccessOnlyFrom.podSelector |
Pods selector label that is allowed to access the PostgreSQL read-only nodes. This label will be used to identified the allowed pod(s). | {} |
networkPolicy.ingressRules.readReplicasAccessOnlyFrom.customRules |
Custom network policy for the PostgreSQL read-only nodes. | {} |
networkPolicy.egressRules.denyConnectionsToExternal |
Enable egress rule that denies outgoing traffic outside the cluster, except for DNS (port 53). | false |
networkPolicy.egressRules.customRules |
Custom network policy rule | {} |
Name | Description | Value |
---|---|---|
volumePermissions.enabled |
Enable init container that changes the owner and group of the persistent volume | false |
volumePermissions.image.registry |
Init container volume-permissions image registry | docker.io |
volumePermissions.image.repository |
Init container volume-permissions image repository | bitnami/bitnami-shell |
volumePermissions.image.tag |
Init container volume-permissions image tag (immutable tags are recommended) | 11-debian-11-r35 |
volumePermissions.image.digest |
Init container volume-permissions image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag | "" |
volumePermissions.image.pullPolicy |
Init container volume-permissions image pull policy | IfNotPresent |
volumePermissions.image.pullSecrets |
Init container volume-permissions image pull secrets | [] |
volumePermissions.resources.limits |
Init container volume-permissions resource limits | {} |
volumePermissions.resources.requests |
Init container volume-permissions resource requests | {} |
volumePermissions.containerSecurityContext.runAsUser |
User ID for the init container | 0 |
Name | Description | Value |
---|---|---|
serviceAccount.create |
Enable creation of ServiceAccount for PostgreSQL pod | false |
serviceAccount.name |
The name of the ServiceAccount to use. | "" |
serviceAccount.automountServiceAccountToken |
Allows auto mount of ServiceAccountToken on the serviceAccount created | true |
serviceAccount.annotations |
Additional custom annotations for the ServiceAccount | {} |
rbac.create |
Create Role and RoleBinding (required for PSP to work) | false |
rbac.rules |
Custom RBAC rules to set | [] |
psp.create |
Whether to create a PodSecurityPolicy. WARNING: PodSecurityPolicy is deprecated in Kubernetes v1.21 or later, unavailable in v1.25 or later | false |
Name | Description | Value |
---|---|---|
metrics.enabled |
Start a prometheus exporter | false |
metrics.image.registry |
PostgreSQL Prometheus Exporter image registry | docker.io |
metrics.image.repository |
PostgreSQL Prometheus Exporter image repository | bitnami/postgres-exporter |
metrics.image.tag |
PostgreSQL Prometheus Exporter image tag (immutable tags are recommended) | 0.11.1-debian-11-r8 |
metrics.image.digest |
PostgreSQL image digest in the way sha256:aa.... Please note this parameter, if set, will override the tag | "" |
metrics.image.pullPolicy |
PostgreSQL Prometheus Exporter image pull policy | IfNotPresent |
metrics.image.pullSecrets |
Specify image pull secrets | [] |
metrics.customMetrics |
Define additional custom metrics | {} |
metrics.extraEnvVars |
Extra environment variables to add to PostgreSQL Prometheus exporter | [] |
metrics.containerSecurityContext.enabled |
Enable PostgreSQL Prometheus exporter containers' Security Context | true |
metrics.containerSecurityContext.runAsUser |
Set PostgreSQL Prometheus exporter containers' Security Context runAsUser | 1001 |
metrics.containerSecurityContext.runAsNonRoot |
Set PostgreSQL Prometheus exporter containers' Security Context runAsNonRoot | true |
metrics.livenessProbe.enabled |
Enable livenessProbe on PostgreSQL Prometheus exporter containers | true |
metrics.livenessProbe.initialDelaySeconds |
Initial delay seconds for livenessProbe | 5 |
metrics.livenessProbe.periodSeconds |
Period seconds for livenessProbe | 10 |
metrics.livenessProbe.timeoutSeconds |
Timeout seconds for livenessProbe | 5 |
metrics.livenessProbe.failureThreshold |
Failure threshold for livenessProbe | 6 |
metrics.livenessProbe.successThreshold |
Success threshold for livenessProbe | 1 |
metrics.readinessProbe.enabled |
Enable readinessProbe on PostgreSQL Prometheus exporter containers | true |
metrics.readinessProbe.initialDelaySeconds |
Initial delay seconds for readinessProbe | 5 |
metrics.readinessProbe.periodSeconds |
Period seconds for readinessProbe | 10 |
metrics.readinessProbe.timeoutSeconds |
Timeout seconds for readinessProbe | 5 |
metrics.readinessProbe.failureThreshold |
Failure threshold for readinessProbe | 6 |
metrics.readinessProbe.successThreshold |
Success threshold for readinessProbe | 1 |
metrics.startupProbe.enabled |
Enable startupProbe on PostgreSQL Prometheus exporter containers | false |
metrics.startupProbe.initialDelaySeconds |
Initial delay seconds for startupProbe | 10 |
metrics.startupProbe.periodSeconds |
Period seconds for startupProbe | 10 |
metrics.startupProbe.timeoutSeconds |
Timeout seconds for startupProbe | 1 |
metrics.startupProbe.failureThreshold |
Failure threshold for startupProbe | 15 |
metrics.startupProbe.successThreshold |
Success threshold for startupProbe | 1 |
metrics.customLivenessProbe |
Custom livenessProbe that overrides the default one | {} |
metrics.customReadinessProbe |
Custom readinessProbe that overrides the default one | {} |
metrics.customStartupProbe |
Custom startupProbe that overrides the default one | {} |
metrics.containerPorts.metrics |
PostgreSQL Prometheus exporter metrics container port | 9187 |
metrics.resources.limits |
The resources limits for the PostgreSQL Prometheus exporter container | {} |
metrics.resources.requests |
The requested resources for the PostgreSQL Prometheus exporter container | {} |
metrics.service.ports.metrics |
PostgreSQL Prometheus Exporter service port | 9187 |
metrics.service.clusterIP |
Static clusterIP or None for headless services | "" |
metrics.service.sessionAffinity |
Control where client requests go, to the same pod or round-robin | None |
metrics.service.annotations |
Annotations for Prometheus to auto-discover the metrics endpoint | {} |
metrics.serviceMonitor.enabled |
Create ServiceMonitor Resource for scraping metrics using Prometheus Operator | false |
metrics.serviceMonitor.namespace |
Namespace for the ServiceMonitor Resource (defaults to the Release Namespace) | "" |
metrics.serviceMonitor.interval |
Interval at which metrics should be scraped. | "" |
metrics.serviceMonitor.scrapeTimeout |
Timeout after which the scrape is ended | "" |
metrics.serviceMonitor.labels |
Additional labels that can be used so ServiceMonitor will be discovered by Prometheus | {} |
metrics.serviceMonitor.selector |
Prometheus instance selector labels | {} |
metrics.serviceMonitor.relabelings |
RelabelConfigs to apply to samples before scraping | [] |
metrics.serviceMonitor.metricRelabelings |
MetricRelabelConfigs to apply to samples before ingestion | [] |
metrics.serviceMonitor.honorLabels |
Specify honorLabels parameter to add the scrape endpoint | false |
metrics.serviceMonitor.jobLabel |
The name of the label on the target service to use as the job name in prometheus. | "" |
metrics.prometheusRule.enabled |
Create a PrometheusRule for Prometheus Operator | false |
metrics.prometheusRule.namespace |
Namespace for the PrometheusRule Resource (defaults to the Release Namespace) | "" |
metrics.prometheusRule.labels |
Additional labels that can be used so PrometheusRule will be discovered by Prometheus | {} |
metrics.prometheusRule.rules |
PrometheusRule definitions | [] |
Specify each parameter using the --set key=value[,key=value]
argument to helm install
. For example,
$ helm install my-release \
--set auth.postgresPassword=secretpassword
bitnami/postgresql
The above command sets the PostgreSQL postgres
account password to secretpassword
.
NOTE: Once this chart is deployed, it is not possible to change the application's access credentials, such as usernames or passwords, using Helm. To change these application credentials after deployment, delete any persistent volumes (PVs) used by the chart and re-deploy it, or use the application's built-in administrative tools if available.
Warning Setting a password will be ignored on new installation in case when previous Posgresql release was deleted through the helm command. In that case, old PVC will have an old password, and setting it through helm won't take effect. Deleting persistent volumes (PVs) will solve the issue. Refer to issue 2061 for more details
Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,
helm install my-release -f values.yaml bitnami/postgresql
Tip: You can use the default values.yaml
It is strongly recommended to use immutable tags in a production environment. This ensures your deployment does not change automatically if the same tag is updated with a different image.
Bitnami will release a new chart updating its containers if a new version of the main container, significant changes, or critical vulnerabilities exist.
At the top level, there is a service object which defines the services for both primary and readReplicas. For deeper customization, there are service objects for both the primary and read types individually. This allows you to override the values in the top level service object so that the primary and read can be of different service types and with different clusterIPs / nodePorts. Also in the case you want the primary and read to be of type nodePort, you will need to set the nodePorts to different values to prevent a collision. The values that are deeper in the primary.service or readReplicas.service objects will take precedence over the top level service object.
To modify the application version used in this chart, specify a different version of the image using the image.tag
parameter and/or a different repository using the image.repository
parameter. Refer to the chart documentation for more information on these parameters and how to use them with images from a private registry.
This helm chart also supports to customize the PostgreSQL configuration file. You can add additional PostgreSQL configuration parameters using the primary.extendedConfiguration
/readReplicas.extendedConfiguration
parameters as a string. Alternatively, to replace the entire default configuration use primary.configuration
.
You can also add a custom pg_hba.conf using the primary.pgHbaConfiguration
parameter.
In addition to these options, you can also set an external ConfigMap with all the configuration files. This is done by setting the primary.existingConfigmap
parameter. Note that this will override the two previous options.
The Bitnami PostgreSQL image allows you to use your custom scripts to initialize a fresh instance. In order to execute the scripts, you can specify custom scripts using the primary.initdb.scripts
parameter as a string.
In addition, you can also set an external ConfigMap with all the initialization scripts. This is done by setting the primary.initdb.scriptsConfigMap
parameter. Note that this will override the two previous options. If your initialization scripts contain sensitive information such as credentials or passwords, you can use the primary.initdb.scriptsSecret
parameter.
The allowed extensions are .sh
, .sql
and .sql.gz
.
TLS support can be enabled in the chart by specifying the tls.
parameters while creating a release. The following parameters should be configured to properly enable the TLS support in the chart:
tls.enabled
: Enable TLS support. Defaults tofalse
tls.certificatesSecret
: Name of an existing secret that contains the certificates. No defaults.tls.certFilename
: Certificate filename. No defaults.tls.certKeyFilename
: Certificate key filename. No defaults.
For example:
-
First, create the secret with the cetificates files:
kubectl create secret generic certificates-tls-secret --from-file=./cert.crt --from-file=./cert.key --from-file=./ca.crt
-
Then, use the following parameters:
volumePermissions.enabled=true tls.enabled=true tls.certificatesSecret="certificates-tls-secret" tls.certFilename="cert.crt" tls.certKeyFilename="cert.key"
Note TLS and VolumePermissions: PostgreSQL requires certain permissions on sensitive files (such as certificate keys) to start up. Due to an on-going issue regarding kubernetes permissions and the use of
containerSecurityContext.runAsUser
, you must enablevolumePermissions
to ensure everything works as expected.
If you need additional containers to run within the same pod as PostgreSQL (e.g. an additional metrics or logging exporter), you can do so via the sidecars
config parameter. Simply define your container according to the Kubernetes container spec.
# For the PostgreSQL primary
primary:
sidecars:
- name: your-image-name
image: your-image
imagePullPolicy: Always
ports:
- name: portname
containerPort: 1234
# For the PostgreSQL replicas
readReplicas:
sidecars:
- name: your-image-name
image: your-image
imagePullPolicy: Always
ports:
- name: portname
containerPort: 1234
The chart optionally can start a metrics exporter for prometheus. The metrics endpoint (port 9187) is not exposed and it is expected that the metrics are collected from inside the k8s cluster using something similar as the described in the example Prometheus scrape configuration.
The exporter allows to create custom metrics from additional SQL queries. See the Chart's values.yaml
for an example and consult the exporters documentation for more details.
In more complex scenarios, we may have the following tree of dependencies
+--------------+
| |
+------------+ Chart 1 +-----------+
| | | |
| --------+------+ |
| | |
| | |
| | |
| | |
v v v
+-------+------+ +--------+------+ +--------+------+
| | | | | |
| PostgreSQL | | Sub-chart 1 | | Sub-chart 2 |
| | | | | |
+--------------+ +---------------+ +---------------+
The three charts below depend on the parent chart Chart 1. However, subcharts 1 and 2 may need to connect to PostgreSQL as well. In order to do so, subcharts 1 and 2 need to know the PostgreSQL credentials, so one option for deploying could be deploy Chart 1 with the following parameters:
postgresql.auth.username=testuser
subchart1.postgresql.auth.username=testuser
subchart2.postgresql.auth.username=testuser
postgresql.auth.password=testpass
subchart1.postgresql.auth.password=testpass
subchart2.postgresql.auth.password=testpass
postgresql.auth.database=testdb
subchart1.postgresql.auth.database=testdb
subchart2.postgresql.auth.database=testdb
If the number of dependent sub-charts increases, installing the chart with parameters can become increasingly difficult. An alternative would be to set the credentials using global variables as follows:
global.postgresql.auth.username=testuser
global.postgresql.auth.password=testpass
global.postgresql.auth.database=testdb
This way, the credentials will be available in all of the subcharts.
The Bitnami PostgreSQL image stores the PostgreSQL data and configurations at the /bitnami/postgresql
path of the container.
Persistent Volume Claims are used to keep the data across deployments. This is known to work in GCE, AWS, and minikube. See the Parameters section to configure the PVC or to disable persistence.
If you already have data in it, you will fail to sync to standby nodes for all commits, details can refer to the code present in the container repository. If you need to use those data, please covert them to sql and import after helm install
finished.
To enable network policy for PostgreSQL, install a networking plugin that implements the Kubernetes NetworkPolicy spec, and set networkPolicy.enabled
to true
.
For Kubernetes v1.5 & v1.6, you must also turn on NetworkPolicy by setting the DefaultDeny namespace annotation. Note: this will enforce policy for all pods in the namespace:
kubectl annotate namespace default "net.beta.kubernetes.io/network-policy={\"ingress\":{\"isolation\":\"DefaultDeny\"}}"
With NetworkPolicy enabled, traffic will be limited to just port 5432.
For more precise policy, set networkPolicy.allowExternal=false
. This will only allow pods with the generated client label to connect to PostgreSQL.
This label will be displayed in the output of a successful install.
Differences between Bitnami PostgreSQL image and Docker Official image
- The Docker Official PostgreSQL image does not support replication. If you pass any replication environment variable, this would be ignored. The only environment variables supported by the Docker Official image are POSTGRES_USER, POSTGRES_DB, POSTGRES_PASSWORD, POSTGRES_INITDB_ARGS, POSTGRES_INITDB_WALDIR and PGDATA. All the remaining environment variables are specific to the Bitnami PostgreSQL image.
- The Bitnami PostgreSQL image is non-root by default. This requires that you run the pod with
securityContext
and updates the permissions of the volume with aninitContainer
. A key benefit of this configuration is that the pod follows security best practices and is prepared to run on Kubernetes distributions with hard security constraints like OpenShift. - For OpenShift, one may either define the runAsUser and fsGroup accordingly, or try this more dynamic option: volumePermissions.securityContext.runAsUser="auto",securityContext.enabled=false,containerSecurityContext.enabled=false,shmVolume.chmod.enabled=false
This chart allows you to set your custom affinity using the XXX.affinity
parameter(s). Find more information about Pod's affinity in the kubernetes documentation.
As an alternative, you can use of the preset configurations for pod affinity, pod anti-affinity, and node affinity available at the bitnami/common chart. To do so, set the XXX.podAffinityPreset
, XXX.podAntiAffinityPreset
, or XXX.nodeAffinityPreset
parameters.
Find more information about how to deal with common errors related to Bitnami's Helm charts in this troubleshooting guide.
Refer to the chart documentation for more information about how to upgrade from previous releases.
Copyright © 2022 Bitnami
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.