Hosts

Auth + VPN + Reverse proxy

The first host, which must have a static IP, runs authentication and a VPN behind a reverse proxy, along with routing traffic to other notes. Currently, Authentik is used for authentication, Headscale is used for the VPN, and Caddy is used to reverse proxy. To set up this host, follow the steps below.

Initial setup
Restic setup (w/ cronjobs for backup.sh and remove-old.sh)
Run containers (Caddy and Authentik must be the first and second, respectively)
1. Caddy-ingress
  1. Edit hostmap.json to include the domain name and any subdomains that will be used
  2. Generate a caddy-ingress.json file using reload-caddy-json.sh
  3. Bring up the ingress container
2. Caddy-docker-proxy
  - run docker network create cdp before bringing the container up
3. Authentik
  - after bringing up authentik, create a user for yourself and another for servers
  - create a headscalars group and add any users that should be able to access the headscale server
  - create an OIDC provider, then create an application for headscale using that provider
4. Headscale
  - update the .env file with the OIDC provider and application details, as well as the domain name and other details
5. Static-file-server
6. Uptime Kuma
Tailscale setup

Worker nodes

Subsequently, as many nodes as desired can be added, with or without static IPs. To set up a worker node, follow the steps below.

Initial setup
Restic setup (w/ cronjobs for backup.sh only)
Tailscale setup + join the network
Run containers
1. Caddy (use caddy-docker-proxy here)
  - run docker network create cdp before bringing the container up
2. Any subdomains that will be used must be added to the hostmap.json file on the auth host, and the caddy-ingress.json file must be regenerated and loaded using reload-caddy-json.sh

Steps

Initial setup

If on a VPS with an automatically created user, you can optionally pick a new username as desired:

export NAME=avirut

Next, create a new user with the same username as the automatically created user, add it to the sudo group, and copy over the SSH keys from the automatically created user:

sudo adduser $NAME
sudo usermod -aG sudo $NAME
sudo mkdir /home/$NAME/.ssh
sudo chmod 700 /home/$NAME/.ssh
sudo cp ~/.ssh/authorized_keys /home/$NAME/.ssh/authorized_keys
sudo chown -R $NAME:$NAME /home/$NAME/.ssh
sudo chmod 600 /home/$NAME/.ssh/authorized_keys

Finally, SSH in with the new username and delete the automatically created user:

sudo deluser --remove-home <automatically created user>

Set the timezone as appropriate:

sudo timedatectl set-timezone America/Chicago
timedatectl

Next, install Docker by following the official instructions.

Complete the suggested post-installation steps:

sudo groupadd docker
sudo usermod -aG docker $USER
newgrp docker

Test docker by running the hello-world container:

docker run hello-world

Tailscale setup

Download and install Tailscale from the official website. Login with:

sudo tailscale up --login-server https://hs.${DOMAIN}

Complete the printed steps to authorize the device.

Swarm setup

For Docker swarm to work, certain ports must be open on all hosts. First, ensure that any swarm hosts with managed network ingress rules (e.g., on Oracle Cloud) have the appropriate ports open through the web GUI. These ports are:

2377/tcp
7946/tcp
7946/udp
4789/udp
2376/tcp

Both above and below, we can open hosts only to the tailnet IP range, i.e., 100.64.0.0/10.

Then, on all swarm hosts, use firewalld to edit iptables:

sudo apt install firewalld
sudo systemctl enable firewalld

sudo firewall-cmd --permanent --zone=public --add-port=2377/tcp
sudo firewall-cmd --permanent --zone=public --add-port=7946/tcp
sudo firewall-cmd --permanent --zone=public --add-port=7946/udp
sudo firewall-cmd --permanent --zone=public --add-port=4789/udp
sudo firewall-cmd --permanent --zone=public --add-port=2376/udp
sudo firewall-cmd --reload

Next, initialize the swarm:

docker swarm init --advertise-addr <tailnet IP>

Finally, add the other hosts to the swarm:

docker swarm join-token worker # get the token from the swarm manager

Run the command printed above on other hosts, adding in --advertise-addr <tailnet IP>.

Create a Docker overlay network for the swarm:

docker network create --driver overlay --attachable --subnet

Debugging

Docker swarm networking

If you see an error that looks like:

docker: Error response from daemon: error creating external connectivity network: Failed to Setup IP tables: Unable to enable SKIP DNAT rule:  (iptables failed: iptables --wait -t nat -I DOCKER -i docker_gwbridge -j RETURN: iptables: No chain/target/match by that name.

Then, try restarting Docker:

sudo systemctl restart docker

avirut / selfhosted