atomicules / chef-cookbook

Development repository for Chef cookbook RabbitMQ (forked for https://github.com/rabbitmq/chef-cookbook/pull/501, kept for reference)

RabbitMQ Chef Cookbook

This is a cookbook for managing RabbitMQ with Chef.

Supported Chef Versions

This cookbook targets Chef 12.1 and later.

Dependencies

This cookbook depends on the Erlang cookbook and assumes that the user configures that cookbook's attributes to provision a supported Erlang/OTP version for running RabbitMQ.

Examples of how to do that are provided below.

Supported RabbitMQ Versions

5.x release series of this cookbook can provision any recent (3.7.x, 3.6.x) version and even older ones (e.g. 3.5.8), provided that a supported Erlang version is also provisioned.

3.7.x

Ensure Your Cookbook Version is Compatible

To provision RabbitMQ 3.7.x, you must use version 5.5.0 of this cookbook or later. Older versions will use incorrect package download URLs.

Provision Erlang/OTP 19.3 or Later

Before provisioning a 3.7.x release, please beware that the minimum required Erlang version for it is 19.3. Most distributions provide older versions, so Erlang must be provisioned either from Erlang Solutions or RabbitMQ's zero dependency Erlang RPM.

The Erlang cookbook will provision packages from Erlang Solutions if node['erlang']['install_method'] is set to esl:

# will install the latest release, please
# consult with https://www.rabbitmq.com/which-erlang.html first
node['erlang']['install_method'] = "esl"

to provision a specific version, e.g. 20.2.2:

node['erlang']['install_method'] = "esl"
# Ubuntu and Debian
# note the "1:" package epoch prefix
node['erlang']['esl']['version'] = "1:20.2.2"

node['erlang']['install_method'] = "esl"
# CentOS, RHEL, Fedora
node['erlang']['esl']['version'] = "20.2.2-1"

Set RabbitMQ Version

Set node['rabbitmq']['version'] to specify a version:

node['rabbitmq']['version'] = "3.7.3"

If you have node['rabbitmq']['deb_package_url'] or node['rabbitmq']['deb_package_url'] overridden from earlier versions, consider omitting those attributes. Otherwise see a section on download location customization below.

3.7.x releases will be downloaded from Bintray by default.

3.6.x

Provision Erlang/OTP 19.3 or Later

Erlang 19.3.6.5 or 20.x versions are highly recommended for most recent 3.6.x releases.

Most distributions provide older versions, so Erlang must be provisioned either from Erlang Solutions or RabbitMQ's zero dependency Erlang RPM.

The Erlang cookbook will provision packages from Erlang Solutions if node['erlang']['install_method'] is set to esl:

# will install the latest release, please
# consult with https://www.rabbitmq.com/which-erlang.html first
node['erlang']['install_method'] = "esl"

to provision a specific version, e.g. 20.2.2:

node['erlang']['install_method'] = "esl"
# Ubuntu and Debian
# note the "1:" package epoch prefix
node['erlang']['esl']['version'] = "1:20.2.2"

node['erlang']['install_method'] = "esl"
# CentOS, RHEL, Fedora
node['erlang']['esl']['version'] = "20.2.2-1"

Set RabbitMQ Version

Set node['rabbitmq']['version'] to specify a version:

node['rabbitmq']['version'] = "3.6.16"

3.6.x releases will be downloaded from GitHub by default.

Supported Distributions

The release was tested with recent RabbitMQ releases on

• CentOS 7.x
• Ubuntu 16.04
• Debian 9.0

Those are the distributions currently used to run tests with Kitchen.

Newer Versions

Local Kitchen tests and user experience suggest that more recent Debian, Ubuntu and CentOS 7.x versions should work just fine.

Older Versions

CentOS 6.x, Ubuntu 14.04 and Debian 8.0 might work just fine but they are no longer on the "must support" list of distributions.

Recipes

default

Installs rabbitmq-server via direct download (from Bintray or GitHub, depending on the version) of the installation package or using the distribution version. Depending on your distribution, the provided version may be quite old so direct download is the default option.

If you want to use the distro version, set the attribute ['rabbitmq']['use_distro_version'] to true.

The cluster recipe is now combined with the default and will now auto-cluster. Set the ['rabbitmq']['clustering']['enable'] attribute to true, ['rabbitmq']['clustering']['cluster_disk_nodes'] array of node@host strings that describe which you want to be disk nodes and then set an alphanumeric string for the erlang_cookie.

To enable SSL turn ssl to true and set the paths to your cacert, cert and key files.

node['rabbitmq']['ssl'] = true
node['rabbitmq']['ssl_cacert'] = '/path/to/cacert.pem'
node['rabbitmq']['ssl_cert'] = '/path/to/cert.pem'
node['rabbitmq']['ssl_key'] = '/path/to/key.pem'

Listening for TCP connections may be limited to a specific interface by setting the following attribute:

node['rabbitmq']['tcp_listen_interface'] = nil

Listening for SSL connections may be limited to a specific interface by setting the following attribute:

node['rabbitmq']['ssl_listen_interface'] = nil

Custom Package Download Locations

node['rabbitmq']['deb_package_url'] and node['rabbitmq']['deb_package_url'] can be used to override the package download location. They configure a prefix without a version. Set them to a download location without a version if you want to provision from a custom endpoint such as a local mirror.

The default recipe will append a version suffix that matches RabbitMQ tag naming scheme. For 3.7.x or later, it is just the version (unchanged).

For 3.6.x and 3.5.x, it is "rabbitmq_v{version}" where {version} being the value of node['rabbitmq']['version'] with dots replaced by underscores. So, 3.6.16 will be translated to rabbitmq_v3_6_16.

Lastly, a package name will be appended to form a full download URL. They rarely need changing but can also be overridden using the node['rabbitmq']['deb_package'] and node['rabbitmq']['rpm_package'] attributes.

Attributes

A full list of SSL attributes can be found in attributes/default.rb.

Default values and usage information of important attributes are shown below. More attributes are documented in metadata.rb.

Username and Password

The default username and password are guest/guest:

['rabbitmq']['default_user'] = 'guest'

['rabbitmq']['default_pass'] = 'guest'

Loopback Users

By default, the guest user can only connect via localhost. This is the behavior of RabbitMQ when the loopback_users configuration is not specified in it's configuration file. Also, by default, this cookbook does not specify loopback_users in the configuration file:

['rabbitmq']['loopback_users'] = nil

If you wish to allow the default guest user to connect remotely, you can change this to []. If instead you wanted to allow just the user 'foo' to connect over loopback, you would set this value to ["foo"]. Learn more in the RabbitMQ Access Control guide.

Definitions Import

RabbitMQ management plugin provides a means to load a definitions (schema) file on node boot. See Definitions Export and Import and Backup guides for details.

To configure definition loading, set the following attribute:

['rabbitmq']['management']['load_definitions'] = true

By default, the node will be configured to load a JSON at /etc/rabbitmq/load_definitions.json; however, you can define another path if you'd prefer using the following attribute:

['rabbitmq']['management']['definitions_file'] = '/path/to/your/definitions.json'

In order to use this functionality, you will need to provision a file referenced by the above attribute before you execute any recipes in the RabbitMQ cookbook (in other words, before the node starts). For example, this can be done using a remote file resource.

mgmt_console

Installs the rabbitmq_management plugin. To use https connection to management console, turn ['rabbitmq']['web_console_ssl'] to true. The SSL port for web management console can be configured by setting attribute ['rabbitmq']['web_console_ssl_port'], whose default value is 15671.

plugin_management

Enables any plugins listed in the node['rabbitmq']['enabled_plugins'] and disables any listed in node['rabbitmq']['disabled_plugins'] attributes.

community_plugins

Downloads, installs and enables pre-built community plugins binaries.

To specify a plugin, set the attribute node['rabbitmq']['community_plugins']['PLUGIN_NAME'] to '{DOWNLOAD_URL}'.

policy_management

Enables any policies listed in the node['rabbitmq']['policies'] and disables any listed in node['rabbitmq']['disabled_policies'] attributes.

See examples in attributes file.

user_management

Enables any users listed in the node['rabbitmq']['enabled_users'] and disables any listed in node['rabbitmq']['disabled_users'] attributes. You can provide user credentials, the vhosts that they need to have access to and the permissions that should be allocated to each user.

node['rabbitmq']['enabled_users'] = [
    {
        :name => 'kitten',
        :password => 'kitten',
        :tag => 'leader',
        :rights => [
            {
                :vhost => 'nova',
                :conf => '.*',
                :write => '.*',
                :read => '.*'
            }
        ]
    }
]

Note that with this approach user credentials will be stored in the attribute file. Using encrypted data bags is therefore highly recommended.

Alternatively definitions export and import (see above) can be used. Definition files contain password hashes since clear text values are not stored.

virtualhost_management

Enables any vhosts listed in the node['rabbitmq']['virtualhosts'] and disables any listed in node['rabbitmq']['disabled_virtualhosts'] attributes.

cluster

Configures a cluster of nodes.

It supports two clustering modes: auto or manual.

• Auto clustering: lists cluster nodes in the RabbitMQ config file. Those are taken from lists the nodes node['rabbitmq']['clustering']['cluster_nodes'].
• Manual clustering : Configure the cluster by executing rabbitmqctl join_cluster command.

Attributes

• node['rabbitmq']['clustering']['enable'] : Default decision flag of clustering
• node['rabbitmq']['erlang_cookie'] : Same erlang cookie is required for the cluster
• node['rabbitmq']['clustering']['use_auto_clustering'] : Default is false. (manual clustering is default)
• node['rabbitmq']['clustering']['cluster_name'] : Name of cluster. default value is nil. In case of nil or '' is set for cluster_name, first node name in node['rabbitmq']['clustering']['cluster_nodes'] attribute will be set for manual clustering. for the auto clustering, one of the node name will be set.
• node['rabbitmq']['clustering']['cluster_nodes'] : List of cluster nodes. it required node name and cluster node type. please refer to example in below.

Example

node['rabbitmq']['clustering']['enable'] = true
node['rabbitmq']['erlang_cookie'] = 'AnyAlphaNumericStringWillDo'
node['rabbitmq']['clustering']['cluster_partition_handling'] = 'pause_minority'
node['rabbitmq']['clustering']['use_auto_clustering'] = false
node['rabbitmq']['clustering']['cluster_name'] = 'qa_env'
node['rabbitmq']['clustering']['cluster_nodes'] = [
    {
        :name => 'rabbit@rabbit1'
    },
    {
        :name => 'rabbit@rabbit2'
    },
    {
        :name => 'rabbit@rabbit3'
    }
]

Resources/Providers

There are 5 LWRPs for interacting with RabbitMQ.

plugin

Enables or disables a rabbitmq plugin. Plugins are not supported for releases prior to 2.7.0.

• :enable enables a plugin
• :disable disables a plugin

Examples

rabbitmq_plugin "rabbitmq_stomp" do
  action :enable
end

rabbitmq_plugin "rabbitmq_shovel" do
  action :disable
end

policy

sets or clears a rabbitmq policy.

• :set sets a policy
• :clear clears a policy
• :list lists policys

Examples

rabbitmq_policy "ha-all" do
  pattern "^(?!amq\\.).*"
  parameters ({"ha-mode"=>"all"})
  priority 1
  action :set
end

rabbitmq_policy "ha-all" do
  action :clear
end

user

Adds and deletes users, fairly simplistic permissions management.

• :add adds a user with a password
• :delete deletes a user
• :set_permissions sets the permissions for a user, vhost is optional
• :clear_permissions clears the permissions for a user
• :set_tags set the tags on a user
• :clear_tags clear any tags on a user
• :change_password set the password for a user

Examples

rabbitmq_user "guest" do
  action :delete
end

rabbitmq_user "nova" do
  password "sekret"
  action :add
end

rabbitmq_user "nova" do
  vhost "/nova"
  permissions ".* .* .*"
  action :set_permissions
end

rabbitmq_user "rmq" do
  vhost ["/", "/rmq", "/nova"]
  permissions ".* .* .*"
  action :set_permissions
end

rabbitmq_user "joe" do
  tag "admin,lead"
  action :set_tags
end

vhost

Adds and deletes vhosts.

• :add adds a vhost
• :delete deletes a vhost

Examples

rabbitmq_vhost "/nova" do
  action :add
end

cluster

Join cluster, set cluster name and change cluster node type.

• :join join in cluster as a manual clustering. node will join in first node of json string data.

• cluster nodes data json format : Data should have all the cluster nodes information.

[
    {
        "name" : "rabbit@rabbit1",
        "type" : "disc"
    },
    {
        "name" : "rabbit@rabbit2",
        "type" : "ram"
    },
    {
        "name" "rabbit@rabbit3",
        "type" : "disc"
    }
]

• :set_cluster_name set the cluster name.
• :change_cluster_node_type change cluster type of node. disc or ram should be set.

Examples

rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
  action :join
end

rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
  cluster_name 'seoul_tokyo_newyork'
  action :set_cluster_name
end

rabbitmq_cluster '[{"name":"rabbit@rabbit1","type":"disc"},{"name":"rabbit@rabbit2","type":"ram"},{"name":"rabbit@rabbit3","type":"disc"}]' do
  action :change_cluster_node_type
end

Removing nodes from cluster

This cookbook provides the primitives to remove a node from a cluster via helper functions but do not include these in any recipes. This is something that is potentially very dangerous and different deployments will have different needs and IF you decide you need this it should be implemented in your wrapper with EXTREME caution. There are 2 helper methods for 2 different scenario:

• removing self from cluster. This should likely only be considered for machines on a normal decommission. This is accomplished by using the helper fucntion reset_current_node.
• removing another node from cluster. This should only be done once you are sure the machine is gone and won't come back. This can be accomplished via remove_remote_node_from_cluster.

Limitations

For an already running cluster, these actions still require manual intervention:

• changing the :erlang_cookie
• turning :cluster from true to false

License & Authors

• Author:: Benjamin Black
• Author:: Daniel DeLeo
• Author:: Matt Ray
• Author:: Seth Thomas
• Author:: JJ Asghar
• Author:: Team RabbitMQ

Copyright (c) 2009-2018, Chef Software, Inc.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.