argonne-lcf / alcf-nccl-tests

NCCL tests for ALCF machines

Testing NCCL performance on ALCF systems

This is for performing NCCL tests with different environment setups (1)-(5) to identify the best setup for NCCL on ALCF systems. We find out that the optimal setup is

ATTENTION For PYTHON workload, one has to remove export NCCL_NET_GDR_LEVEL=PHB on Polaris, because it will cause hang.

export NCCL_NET_GDR_LEVEL=PHB
export NCCL_CROSS_NIC=1
export NCCL_COLLNET_ENABLE=1
export NCCL_NET="AWS Libfabric"
export LD_LIBRARY_PATH=/soft/libraries/aws-ofi-nccl/v1.9.1-aws/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH=/soft/libraries/hwloc/lib/:$LD_LIBRARY_PATH
export FI_CXI_DISABLE_HOST_REGISTER=1
export FI_MR_CACHE_MONITOR=userfaultfd
export FI_CXI_DEFAULT_CQ_SIZE=131072

This achieves 5-10x improvement over the default setup.

Different environment setups

(1) Default settting, no NCCL environement setup. This will use TCP, resulting very bad performance.

(2) with following setup

export NCCL_NET_GDR_LEVEL=PHB
export NCCL_CROSS_NIC=1
export NCCL_COLLNET_ENABLE=1

(3) the following setup is to see how aws libfabric plugin helps

export NCCL_NET_GDR_LEVEL=PHB
export NCCL_CROSS_NIC=1
export NCCL_COLLNET_ENABLE=1
export NCCL_NET="AWS Libfabric"
export LD_LIBRARY_PATH=/soft/libraries/aws-ofi-nccl/v1.9.1-aws/lib:$LD_LIBRARY_PATH

Note that this will requires the AWS plugin, which can be built on Polaris

git clone v1.9.1-aws https://github.com/aws/aws-ofi-nccl.git
cd aws-ofi-nccl
./configure --prefix=/home/hzheng/PolarisAT/soft/aws-ofi-nccl --with-libfabric=/opt/cray/libfabric/1.15.2.0/ --with-cuda=/soft/compilers/cudatoolkit/cuda\
-12.4.1 --with-hwloc=/soft/libraries/hwloc/

(4) the following setup is to see how FI environment variables help

export NCCL_NET_GDR_LEVEL=PHB
export NCCL_CROSS_NIC=1
export NCCL_COLLNET_ENABLE=1
export NCCL_NET="AWS Libfabric"
export LD_LIBRARY_PATH=/soft/libraries/aws-ofi-nccl/v1.9.1-aws/lib:$LD_LIBRARY_PATH
export FI_CXI_DISABLE_HOST_REGISTER=1
export FI_MR_CACHE_MONITOR=userfaultfd
export FI_CXI_DEFAULT_CQ_SIZE=131072

(5) The following setup is for testing alltoall

export NCCL_NET_GDR_LEVEL=PHB
export NCCL_CROSS_NIC=1
export NCCL_COLLNET_ENABLE=1
export NCCL_NET="AWS Libfabric"
export LD_LIBRARY_PATH=/soft/libraries/aws-ofi-nccl/v1.9.1-aws/lib:$LD_LIBRARY_PATH
export FI_CXI_DISABLE_HOST_REGISTER=1
export FI_MR_CACHE_MONITOR=userfaultfd
export FI_CXI_DEFAULT_CQ_SIZE=131072
export FI_CXI_RX_MATCH_MODE=software
export FI_CXI_RDZV_PROTO=alt_read
export FI_CXI_REQ_BUF_SIZE=8388608

Results & Conclusion

The results are shown in ./results_polaris. One can find analysis here: ./nccl-performance-evaluation.ipynb

The main conclusions are:

• For allreduce and all_gather, the best setup is following. We achieve 5-10x improvement over the default setup.

  export NCCL_NET_GDR_LEVEL=PHB
  export NCCL_CROSS_NIC=1
  export NCCL_COLLNET_ENABLE=1
  export NCCL_NET="AWS Libfabric"
  export LD_LIBRARY_PATH=/soft/libraries/aws-ofi-nccl/v1.9.1-aws/lib:$LD_LIBRARY_PATH
  export LD_LIBRARY_PATH=/soft/libraries/hwloc/lib/:$LD_LIBRARY_PATH
  export FI_CXI_DISABLE_HOST_REGISTER=1
  export FI_MR_CACHE_MONITOR=userfaultfd
  export FI_CXI_DEFAULT_CQ_SIZE=131072

• For alltoall with message size larger than 8MB, additional setup is needed. But this will influence the latency for allreduce and all_gather at smaller message size (<1MB)

  export FI_CXI_RX_MATCH_MODE=software
  export FI_CXI_RDZV_PROTO=alt_read
  export FI_CXI_REQ_BUF_SIZE=8388608

• For allreduce, Slingshot 11 with (4) setup is 3x speed up over slingshot 10 results (for message size over 10 MB)

• We were able to run up to 540 nodes with (4) and (5).

• With (1), we were not able to go beyond 128 nodes. all_gather will cause node failure.