hanobo
Home Assistant implementation of pynobo as a climate component
As for now you can see and change state and set eco/comfort temperatures if you have a supported thermostat.
The possible states are as following:
- Normal (state) - Zone is following the configured calendar and currently in 'state'
- Locked (state) - Same as above, but overrides are not allowed
- state - Zone is overridden to 'state'
To get started with this superexperimental implementation:
-
git clone the repo as [your HA folder]/custom_components/nobo_hub
- you can download the zip as well, but then you have to download pynobo as well and unzip it to [your HA folder]/custom_components/nobo_hub/pynobo.
-
Add the following to your Home Assistant configuration file:
# Nobø Energy Control climate: - platform: nobo_hub host: [your nobø serial] # You can use the 3 last digits if using discovery # ip_address: [your nobø ip] # Uncomment if you do not want discovery
-
Restart Home Assistant, you will get this warning:
WARNING (MainThread) [homeassistant.loader] You are using a custom component for nobo_hub.climate which has not been tested by Home Assistant. This component might cause stability problems, be sure to disable it if you do experience issues with Home Assistant.
-
Play around and figure out what does not work..
-
If you want some more logging info, add this to your Home Assistant configuration file:
# Extra logging logger: default: warning logs: custom_components.nobo_hub.climate: debug