arduino / ArduinoCore-mbed

Repository from Github https://github.comarduino/ArduinoCore-mbed

arduino/ArduinoCore-mbed Issues

HTTP server stops responding when a single WebSocket connection is running on Portenta H7
Updated 12 hours ago11
Clarification on communication transport between STM32U585 and QRB2210 on UNO Q
Updated 12 hours ago
Arduino H7 Video - Display remains black when executed on the M4 processor
Updated 2 days ago2
NANO 33BLE REV2 SENSE SPI/GPIO issue
Updated 25 days ago1
Fix clocking configuration issues on STM32H7x processors
Updated a month ago
[Bug] Arduino GIGA R1 – HTTPS requests falen op nieuwe boards (WiFiSSLClient)
Closed a month ago3
LVGL video scrolling vertical issue
Updated 2 months ago
Arduino Giga analogRead(A8) causes lock up (crash)
Updated 3 months ago
Limited PWM Frequency Range - Cannot Set Below ~500Hz
Updated 3 months ago
SdFat hot-plug fails on GIGA R1
Updated 3 months ago
"SDMMC on Portenta H7 does not recover after a hot-plug removal."
Updated 3 months ago
WiFiUDP::endPacket() issue (BUG) in AP mode after WiFi STA failing to connect to open network
Updated 3 months ago
Increase default socket size for Opta
Updated 4 months ago1
analogWrite does not work well with Arduino RP2040 board
Updated 4 months ago6
I am not able to run a display with Portenta H7
Updated 4 months ago6
GalaxyCore GC2145 image corruption on Nicla Vision over serial
Updated 4 months ago
Really no SE05X support?
Updated 4 months ago2
Tone.cpp memory leak
Updated 4 months ago
Ethernet on Opta - slow request read times
Updated 5 months ago2
Portenta H7 /GIGA R1– SPI write to SD card stuck at ≈1.3 MB/s. Any easy way to speed it up?
Updated 5 months ago
RP2040: us_ticker implementation causes system uptime to wrap sporadically after 2^32µs
Updated 6 months ago1
Opta variant I/O pins vs analog pins
Closed 6 months ago1
Hard fault on Portenta H7 in attachInterrupt() when building with PlatformIO but not with Arduino IDE
Closed 6 months ago3
Nicla Sense ME : Sketch can´t be Uploaded to the NiclaSense ME if a Space is in the Path
Closed 6 months ago
LittleFileSystem2 crashes in unmount in some scenarios
Updated 6 months ago2
OpenAMP library compatibility warning on GIGA
Closed 6 months ago
I2C Slave Regression
Closed 6 months ago
ping: add timeout arg to interfaces
Closed 6 months ago
4.2.4 Arduino Core that compiles at Arduino app compile time does not compile for M4.
Closed 6 months ago1
Arduino H7 Video - LVGL9.X Double buffer is allocated but never used
Closed 7 months ago5
Giga Display going white with LVGL v9.2.2—what is causing this?
Closed 7 months ago6
USBKeyboard.h cannot hold keys, use multiple modifiers or press multple keys at the same time.
Updated 7 months ago
Apparent 'stuck bit' in ADC readings
Updated 7 months ago3
WiFi IP config issues, need WiFi::reset()
Updated 7 months ago2
GIGA R1 - WiFi.begin(), WiFi.beginAP, & WiFiUDP issues
Closed 7 months ago2
4.2.2 Causes Nicla ME to crash when receiving input over I2C
Closed 8 months ago
OPTA / Mbed crash on wifi.begin()
Closed 8 months ago4
Ubuntu bricking Arduino port.
Updated 9 months ago
LF clock compiler warning when compiling for arduino:mbed_nano:nano33ble (v4.2.1)
Updated 9 months ago
DNS resolution hangs UDP for 10 sec on IPV6 networks
Closed 9 months ago1
Nano RP2040 Servo pulsewidth imprecision
Updated 9 months ago
pico_flash missing in pico_sdk
Updated 10 months ago
WhdSTAInterface::set_timeout(_timeout) crashes: 0239-WHD-add-join-timeout-parameter-to-WiFiSTAInterface-a.patch has a bug.
Closed 10 months ago1
Arduino_H7_Video: crash on Portenta H7
Closed 10 months ago1
Wifi disconnecting and will not reconnect after 1 hour with Arduino OPTA WiFi
Updated 10 months ago
mbed-os-to-arduino-macos build failure
Updated 10 months ago3
GIGA R1: Patch mbed targets.json to override LSE drive level and set HIGH
Updated a year ago
Nano 33 BLE Sense Rev2 - 802.15.4 / Zigbee - Nordic SDK
Closed a year ago1
GIGA R1: getUniqueSerialNumber always returns zero
Closed a year ago2
Potential http parser defect due to case fallthrough?
Closed a year ago1