Spinnaker Chart

Spinnaker is an open source, multi-cloud continuous delivery platform.

Chart Details

This chart will provision a fully functional and fully featured Spinnaker installation that can deploy and manage applications in the cluster that it is deployed to.

Redis and Minio are used as the stores for Spinnaker state.

For more information on Spinnaker and its capabilities, see it's documentation.

Installing the Chart

To install the chart with the release name my-release:

$ helm repo add spinnaker https://helmcharts.opsmx.com/
$ helm install --name my-release spinnaker/spinnaker --timeout 600

Note that this chart pulls in many different Docker images so can take a while to fully install.

Configuration

Configurable values are documented in the values.yaml.

Specify each parameter using the --set key=value[,key=value] argument to helm install.

Alternatively, a YAML file that specifies the values for the parameters can be provided while installing the chart. For example,

$ helm install --name my-release -f values.yaml stable/spinnaker

Tip: You can use the default values.yaml

Adding Kubernetes Clusters to Spinnaker

Configuring arbitrary clusters with a kubernetes secret

By default, installing the chart only registers the local cluster as a deploy target for Spinnaker. If you want to add arbitrary clusters need to do the following:

Upload your kubeconfig to a secret with the key config in the cluster you are installing Spinnaker to.

$ kubectl create secret generic --from-file=$HOME/.kube/config my-kubeconfig

Set the following values of the chart:

kubeConfig:
  enabled: true
  secretName: my-kubeconfig
  secretKey: config
  contexts:
  # Names of contexts available in the uploaded kubeconfig
  - my-context
  # This is the context from the list above that you would like
  # to deploy Spinnaker itself to.
  deploymentContext: my-context

Configuring arbitrary clusters with s3

By default, installing the chart only registers the local cluster as a deploy target for Spinnaker. If you do not want to store your kubeconfig as a secret on the cluster, you can also store in s3. Full documentation can be found here.

Upload your kubeconfig to a s3 bucket that halyard and spinnaker services can access.
Set the following values of the chart:

kubeConfig:
  enabled: true
  # secretName: my-kubeconfig
  # secretKey: config
  encryptedKubeconfig: encrypted:s3!r:us-west-2!b:mybucket!f:mykubeconfig
  contexts:
  # Names of contexts available in the uploaded kubeconfig
  - my-context
  # This is the context from the list above that you would like
  # to deploy Spinnaker itself to.
  deploymentContext: my-context

Specifying Docker Registries and Valid Images (Repositories)

Spinnaker will only give you access to Docker images that have been whitelisted, if you're using a private registry or a private repository you also need to provide credentials. Update the following values of the chart to do so:

dockerRegistries:
- name: dockerhub
  address: index.docker.io
  repositories:
    - library/alpine
    - library/ubuntu
    - library/centos
    - library/nginx
# - name: gcr
#   address: https://gcr.io
#   username: _json_key
#   password: '<INSERT YOUR SERVICE ACCOUNT JSON HERE>'
#   email: 1234@5678.com
# - name: ecr
#   address: <AWS-ACCOUNT-ID>.dkr.ecr.<REGION>.amazonaws.com
#   username: AWS
#   passwordCommand: aws --region <REGION> ecr get-authorization-token --output text --query 'authorizationData[].authorizationToken' | base64 -d | sed 's/^AWS://'

You can provide passwords as a Helm value, or you can use a pre-created secret containing your registry passwords. The secret should have an item per Registry in the format: <registry name>: <password>. In which case you'll specify the secret to use in dockerRegistryAccountSecret like so:

dockerRegistryAccountSecret: myregistry-secrets

Specifying persistent storage

Spinnaker supports many persistent storage types. Currently, this chart supports the following:

Azure Storage
Google Cloud Storage
Minio (local S3-compatible object store)
Redis
AWS S3

Use custom `cacerts`

In environments with air-gapped setup, especially with internal tooling (repos) and self-signed certificates it is required to provide an adequate cacerts which overrides the default one:

Create a yaml file cacerts.yaml with a secret that contanins the cacerts

apiVersion: v1
kind: Secret
metadata:
  name: custom-cacerts
data:
  cacerts: |
    xxxxxxxxxxxxxxxxxxxxxxx

Upload your cacerts.yaml to a secret with the key you specify in secretName in the cluster you are installing Spinnaker to.
```
$ kubectl apply -f cacerts.yaml
```

Set the following values of the chart:

customCerts:
   ## Enable to override the default cacerts with your own one
   enabled: false
   secretName: custom-cacerts

Customizing your installation

Manual

While the default installation is ready to handle your Kubernetes deployments, there are many different integrations that you can turn on with Spinnaker. In order to customize Spinnaker, you can use the Halyard command line hal to edit the configuration and apply it to what has already been deployed.

Halyard has an in-cluster daemon that stores your configuration. You can exec a shell in this pod to make and apply your changes. The Halyard daemon is configured with a persistent volume to ensure that your configuration data persists any node failures, reboots or upgrades.

For example:

$ helm install -n cd stable/spinnaker
$ kubectl exec -it cd-spinnaker-halyard-0 bash
spinnaker@cd-spinnaker-halyard-0:/workdir$ hal version list

Automated

If you have known set of commands that you'd like to run after the base config steps or if you'd like to override some settings before the Spinnaker deployment is applied, you can enable the halyard.additionalScripts.enabled flag. You will need to create a config map that contains a key containing the hal commands you'd like to run. You can set the key via the config map name via halyard.additionalScripts.configMapName and the key via halyard.additionalScripts.configMapKey. The DAEMON_ENDPOINT environment variable can be used in your custom commands to get a prepopulated URL that points to your Halyard daemon within the cluster. The HAL_COMMAND environment variable does this for you. For example:

hal --daemon-endpoint $DAEMON_ENDPOINT config security authn oauth2 enable
$HAL_COMMAND config security authn oauth2 enable

If you need to give halyard additional parameters when it deploys Spinnaker, you can specify them with halyard.additionalInstallParameters.

If you would rather the chart make the config file for you, you can set halyard.additionalScripts.create to true and then populate halyard.additionalScripts.data.SCRIPT_NAME.sh with the bash script you'd like to run. If you need associated configmaps or secrets you can configure those to be created as well:

halyard:
  additionalScripts:
    create: true
    data:
      enable_oauth.sh: |-
        echo "Setting oauth2 security"
        $HAL_COMMAND config security authn oauth2 enable
  additionalSecrets:
    create: true
    data:
      password.txt: aHVudGVyMgo=
  additionalConfigMaps:
    create: true
    data:
      metadata.xml: <xml><username>admin</username></xml>
  additionalProfileConfigMaps:
    create: true
    data:
      orca-local.yml: |-
        tasks:
          useManagedServiceAccounts: true

Any files added through additionalConfigMaps will be written to disk at /opt/halyard/additionalConfigMaps.

Use a custom Halyard BOM

Spinnaker uses a Bill of Materials to describe the services that are part of a release. See the BOM documentation for more details.

A custom BOM can be provided to the Helm chart and used for the Halyard deployment:

halyard:
  spinnakerVersion: '1.16.1'
  bom: |-
    artifactSources:
      debianRepository: https://dl.bintray.com/spinnaker-releases/debians
      dockerRegistry: gcr.io/spinnaker-marketplace
      gitPrefix: https://github.com/spinnaker
      googleImageProject: marketplace-spinnaker-release
    dependencies:
      consul:
        version: 0.7.5
      redis:
        version: 2:2.8.4-2
      vault:
        version: 0.7.0
    services:
      clouddriver:
        commit: 031bcec52d6c3eb447095df4251b9d7516ed74f5
        version: 6.3.0-20190904130744
      deck:
        commit: b0aac478e13a7f9642d4d39479f649dd2ef52a5a
        version: 2.12.0-20190916141821
      defaultArtifact: {}
      echo:
        commit: 7aae2141883240bd5747b981b2196adfa5b24225
        version: 2.8.0-20190914075316
      fiat:
        commit: e92cfbcac018d9dcfa03869224f7106bf2a11315
        version: 1.7.0-20190904130744
      front50:
        commit: abc5c168e3619ac084d4130eef7313cbdcfc3f61
        version: 0.19.0-20190904130744
      gate:
        commit: fd0128a6b79ddaca984c3bcdd1259c14f167cd2d
        version: 1.12.0-20190914075316
      igor:
        commit: c9bbca8e5c340d90b812f4fd27c6ebe3088dbc8d
        version: 1.6.0-20190914075316
      kayenta:
        commit: 8aa41e6e723e8d37831f5d4fe0bd5aa24ede5872
        version: 0.11.0-20190830172818
      monitoring-daemon:
        commit: 922385def92058877d61dfc835873539f0377cd7
        version: 0.15.0-20190820135930
      monitoring-third-party:
        commit: 922385def92058877d61dfc835873539f0377cd7
        version: 0.15.0-20190820135930
      orca:
        commit: 7b4e3dd6c4393ba88ebb3ea209a9c95df63e5e87
        version: 2.10.0-20190914075316
      rosco:
        commit: cfb88bb57f7af064876cfe5eef3c330a2621507b
        version: 0.14.0-20190904130744
    timestamp: '2019-09-16 18:18:44'
    version: 1.16.1

This will result in the specified BOM contents being written to a 1.16.1.yml BOM file, and the Spinnaker version set to local:1.16.1.

Set custom annotations for the halyard pod

halyard:
  annotations:
    iam.amazonaws.com/role: <role_arn>

Set custom annotations for the halyard serviceaccount

serviceAccount:
  serviceAccountAnnotations:
    eks.amazonaws.com/role-arn: <role_arn>

Set environment variables on the halyard pod

halyard:
  env:
    - name: JAVA_OPTS
      value: -Dhttp.proxyHost=proxy.example.com

antigenius0910 / spinnaker-helm

Spinnaker Chart

Chart Details

Installing the Chart

Configuration

Adding Kubernetes Clusters to Spinnaker

Configuring arbitrary clusters with a kubernetes secret

Configuring arbitrary clusters with s3

Specifying Docker Registries and Valid Images (Repositories)

Specifying persistent storage

Use custom `cacerts`

Customizing your installation

Manual

Automated

Use a custom Halyard BOM

Set custom annotations for the halyard pod

Set custom annotations for the halyard serviceaccount

Set environment variables on the halyard pod

About

Languages

Spinnaker Chart

Chart Details

Installing the Chart

Configuration

Adding Kubernetes Clusters to Spinnaker

Configuring arbitrary clusters with a kubernetes secret

Configuring arbitrary clusters with s3

Specifying Docker Registries and Valid Images (Repositories)

Specifying persistent storage

Use custom cacerts

Customizing your installation

Manual

Automated

Use a custom Halyard BOM

Set custom annotations for the halyard pod

Set custom annotations for the halyard serviceaccount

Set environment variables on the halyard pod

About

Languages

Use custom `cacerts`