anjoah / buildroot-M5Pi

Buildroot Package for F1C100s/200s

Buildroot Package for Allwinner SIPs

Opensource development package for Allwinner F1C100s & F1C200s

Driver support

Check this file to view current driver support progress for F1C100s/F1C200s: PROGRESS-SUNIV.md

Check this file to view current driver support progress for V3/V3s/S3/S3L: PROGRESS-V3.md

Install

Install necessary packages

sudo apt install wget unzip build-essential git bc swig libncurses-dev libpython3-dev libssl-dev
sudo apt install python3-distutils

Download BSP

Notice: Root permission is not necessery for download or extract.

git clone https://github.com/aodzip/buildroot-tiny200

Make the first build

Notice: Root permission is not necessery for build firmware.

Apply defconfig

Caution: Apply defconfig will reset all buildroot configurations to default values.

Generally, you only need to apply it once.

cd buildroot-tiny200
make widora_mangopi_r3_defconfig

Regular build

make

Speed up build progress

Download speed

Buildroot will download sourcecode when compiling the firmware. You can grab a TRUSTWORTHY archive of 'dl' folder for speed up.

Compile speed

If you have a multicore CPU, you can try

make -j ${YOUR_CPU_COUNT}

or buy a powerful PC for yourself.

Flashing firmware to target

You can flash a board by Linux (Recommended) or Windows system.

Here is the manual.

Helper Scripts

• rebuild-uboot.sh: Recompile U-Boot when you direct edit U-Boot sourcecode.
• rebuild-kernel.sh: Recompile Kernel when you direct edit Kernel sourcecode.
• emulate-chroot.sh: Emulate target rootfs by chroot.