andybeg / SSD1306

Add OLED display with system information to your board

OrangePI_OLED

Add OLED display with sys info to your Orange PI board

connection Orange PI Lite:

OLED	Name	Pin
VDD	3.3v	1
SDA	SDA.0	3
SCK	SCL.0	5
GND	0v	9

May work on other H5, H3 and H2+ boards uder Armbian. Use i2c-0 pins.To change I2C bus make corresponding changes in main.c row 127 (bus = i2c_init((char*)&"/dev/i2c-0", 0x3c);)

To run app:

1. git clone https://github.com/vadzimyatskevich/SSD1306.git
2. cd SSD1306
3. make
4. sudo ./build/ArmbianOLED

To run app at boot time:

1. sudo crontab -e
2. add row: @reboot /home/<your username here>/SSD1306/build/ArmbianOLED ex @reboot /home/orangepi/SSD1306/build/ArmbianOLED
3. reboot board & enjoy :)

Tested with Armbian image https://www.armbian.com/download/, Orange PI Lite and Orange PI Zero boards.