android444 / MKS-GEN_L

MKS GEN_L is a powerful 3D printer control board with ATMEGA2560 and compatible with RAMPS. Support MKS LCD12864A/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. V2.0 The motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...

Home Page:https://es.aliexpress.com/item/32802151924.html?spm=a219c.12010612.8148356.1.e4d93944s4tYDC

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

MKS GEN_L

Features

  • Gen_L CPU is ATMEGA2560-AU, 8bit 16MHZ, 5V logic level, stronger anti-interference type
  • Gen_L V2.0 hardware version support TMC2208/2209 UART mode, TMC2130 SPI mode
  • Support MKS TFT24/28/32/35/70...
  • Support MKS LCD12864A/LCD12864/MKS MINI12864...
  • Support Marlin2.0 firmware and old marlin...

Firmware

How to Build Marlin2.0 by platformio and upload firmware

  • Open project by ATOM 1-open_project
  • Open platformio.ini file, set default_envs = megaatmega2560 2-megaatmega2560
  • Open configuration.h file, set board as MKS_GEN_L or MKS_GEN_L_V2 3-setboard
  • Connect board by USB and set serial 4-connectboard
  • Build and upload firmware 5-build_upload

How to buy the MKS GEN_L

https://www.aliexpress.com/item/32802151924.html?spm=2114.12010612.8148356.3.86d51141VzpLcF MKS_GEN_L_V1 MKS_GEN_L_V2

About

MKS GEN_L is a powerful 3D printer control board with ATMEGA2560 and compatible with RAMPS. Support MKS LCD12864A/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. V2.0 The motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...

https://es.aliexpress.com/item/32802151924.html?spm=a219c.12010612.8148356.1.e4d93944s4tYDC