Some utilities to read data from the Fluke ScopeMeter 99 Series II.
My ScopeMeter 99 II responds to the ID command with the following string:
ScopeMeter 99 Series II; V6.35; 95-02-02; UHM V1.0
That looks like firmware V6.35 of 1995-02-02
The response to CV is:
1993.0
The Fluke ScopeMeters recognise a command language called CPL (Compact Programming Language). Some other Fluke (and possibly Philips) scopes accept a similar set of commands.
| Command | 99 II | SM99R | Name |
|---|---|---|---|
| AS | * | Auto Setup | |
| AT | * | Arm Trigger | |
| CV | CPL Version query | ||
| DS | Default Setup | ||
| GR | * | Go to Remote | |
| GL | * | Go to Local | |
| ID | IDentification query | ||
| IS | * | Instrument Status | |
| LL | * | Local Lockout | |
| PC | Program Communication | ||
| PS | * | Program Setup | |
| PW | * | Program Waveform | |
| QM | * | Query Measurement | |
| QP | Query Print | ||
| QS | * | Query Setup | |
| QW | * | Query Waveform | |
| RD | Read Date | ||
| RI | Reset Instrument | ||
| RS | * | Recall Setup | |
| RT | Read Time | ||
| SS | * | Save Setup | |
| ST | STatus query | ||
| TA | * | Trigger Acquisition | |
| VS | * | View Screen | |
| WD | Write Date | ||
| WT | Write Time |
Commands marked with an asterisk are only available on the ScopeMeter 99 II.
To compile this code, you'll need the usual 'build-essential' package:
sudo apt install build-essential
Once that is installed, you can simply run 'make':
make